Free Next Day Delivery
on orders over £69 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Dispatch
On orders placed up to 5.30pm

Home
Milling Tools
Milling Cutters
Routing Tools
Routing Tools For Composites

Routing Tools For Composites

Uncoated Carbide Fibreglass Router - 11.6001 (Karnasch)

Uncoated Carbide Fibreglass Router - 11.6001 (Karnasch)

The 11.6001 series from Karnasch is a Uncoated carbide fibreglass router. These routers are for contouring, grooving, drilling of a wide range of GFK, CFK, fiberglass reinforced plastics, as well as M...

For Fibreglass, Kevlar, Sandwich Materials, CFRP & Aramid.

Uncoated polished carbide.

These routers are for contouring, grooving, drilling of a wide range of GFK, CFK. fibreglass reinforced plastics, as well as MMC (Metal Matrix Composites), ceramic with glass fiber, graphite, carbon etc.

NO END CUT GEOMETRY.

Diameter (mm)	3 - 12
Overall Length (mm)	38 - 75
Flute Length (mm)	12 - 30
Shank (mm)	3 - 12

From £18.06 £15.05

4, 6 & 8 Flute Solid Carbide Router DFC Coated, Metric - 66-775 Series (LMT Onsrud)

4, 6 & 8 Flute Solid Carbide Router DFC Coated, Metric - 66-775 Series (LMT Onsrud)

The 66-775 series Solid Carbide router from LMT Onsrud is a tool is designed as a combination roughing and finishing tool in one....

Application: composite, fibreglass
The roughing profile reduces cutting forces
The geometry of the finishing flutes cleanly shear Fibres leaving a smooth edge on the workpiece material
Diamond coated (DFC) for increased tool life
4, 6 or 8 flute upcut low helix rougher finisher - Metric

Diameter (mm)	6 - 12
Overall Length (mm)	90 - 100
Flute Length (mm)	20 - 38
Shank (mm)	6 - 12

From £274.24 £228.53

4&6 Flute Diamond Coated Carbide V Style Compression Tool - 29.0412 (Karnasch)

4&6 Flute Diamond Coated Carbide V Style Compression Tool - 29.0412 (Karnasch)

The 29.0412 series from Karnasch is a diamond coated carbide v-style compression tool. Diameters range from 6-16mm and the compression geometry prevents delamination on upper and lower edges in fibre-...

For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.
V-Style compression geometry prevents delamination on upper and lower edges in fibre-reinforced plastics.

Diameter (mm)	10 - 16
Overall Length (mm)	72 - 110
Flute Length (mm)	25 - 48
Shank (mm)	10 - 16

From £211.16 £175.97

8 Flute Diamond Coated Carbide Drawing Cut Rougher Finisher - 29.1762 (Karnasch)

8 Flute Diamond Coated Carbide Drawing Cut Rougher Finisher - 29.1762 (Karnasch)

The 29.1762 series from Karnasch is an Diamond coated carbide 8 flute rougher finisher with drawing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alum...

For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.

Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.

8 flutes, suitable for roughing and finishing.

DRAWING CUT GEOMETRY.

Diameter (mm)	4 - 20
Overall Length (mm)	60 - 150
Flute Length (mm)	16 - 80
Shank (mm)	6 - 20

From £181.10 £150.92

4&6 Flute Diamond Coated Carbide Through Coolant VR Style Compression Tool - 29.0417 (Karnasch)

4&6 Flute Diamond Coated Carbide Through Coolant VR Style Compression Tool - 29.0417 (Karnasch)

The 29.0417 series from Karnasch is a diamond coated carbide v.r-style compression tool with air cooling channels. Diameters range from 6-12mm and the compression geometry prevents delamination on upp...

For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.

Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.

V.R. compression geometry prevents delamination on upper and lower edges in fibre-reinforced plastics.

Available with air cooling channels (29.0417 series).

Diameter (mm)	8 - 12
Overall Length (mm)	70 - 85
Flute Length (mm)	22 - 28
Shank (mm)	8 - 12

From £273.95 £228.29

4 & 6 Flute Solid Carbide Router DFC Coated, Imperial - 66-800 Series (LMT Onsrud)

4 & 6 Flute Solid Carbide Router DFC Coated, Imperial - 66-800 Series (LMT Onsrud)

The 66-800 series Solid Carbide router from LMT Onsrud has a unique geometry preventing delamination on top and the bottom edges of the composites....

Application: composite, Fibreglass
Redesigned compression router with optimised geometry
The open flute geometry dissipates heat to prevent resin flow
Enhanced diamond coating (DFC) protects cutting edges for increased tool life
4 or 6 flute DFC compression-Imperial

From £264.22 £220.18

1 Flute Solid Carbide Chamfering Router - EDAC Series (LMT Belin)

1 Flute Solid Carbide Chamfering Router - EDAC Series (LMT Belin)

The EDAC series 1 flute solid carbide chamfering router for aluminium, wood, foamboard, PVC & high pressure composites....

Cutting end mills for non-ferrous metals and aluminum with a chamfer (can also cut plastics)
This cutter allows to cut materials and make a chamfer at the same time. These tools avoid delamination when laminated sheets

Diameter (mm)	4 - 4
Overall Length (mm)	50 - 50
Flute Length (mm)	2.3 - 3.3
Shank (mm)	6 - 6

From £85.15 £70.96

1 Flute Imperial Solid Carbide Upcut Router - 13000 Series (LMT Belin)

1 Flute Imperial Solid Carbide Upcut Router - 13000 Series (LMT Belin)

The 13000 series solid carbide router for wood, foamboard, PVC and high pressure composites....

Upcut tools are the most commonly used tools.
Chips are evacuted upwards when machining/li>
Workpieces need to be maintained properly because the tool pulls the material upwards

From £35.81 £29.84

8 Flute Diamond Coated Carbide Drawing Cut Pushing Finisher - 29.1763 (Karnasch)

8 Flute Diamond Coated Carbide Drawing Cut Pushing Finisher - 29.1763 (Karnasch)

The 29.1763 series from Karnasch is an Diamond coated carbide 8 flute rougher finisher with pushing cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alum...

For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.
Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.
8 flutes, suitable for roughing and finishing.
PUSHING CUT GEOMETRY.

Diameter (mm)	5 - 20
Overall Length (mm)	60 - 150
Flute Length (mm)	18 - 80
Shank (mm)	6 - 20

From £185.06 £154.22

6 Flute Solid Carbide Router, Metric - 66-500 Series (LMT Onsrud)

6 Flute Solid Carbide Router, Metric - 66-500 Series (LMT Onsrud)

The 66-500 series Solid Carbide router from LMT Onsrud is a DFC coated tool to be used for roughing or finishing carbon fibre laminates. Multiple flutes eliminate vibration and control tool engagement...

Application: composite, fibreglass
Enhanced diamond film coating (DFC) for increased tool life
Chisel tooth design creates a compression effect to prevent delamination and fibre breakout
Drill point for drilling
End mill point for plunging and helical interpolation

Diameter (mm)	3 - 12
Overall Length (mm)	50 - 83
Flute Length (mm)	8 - 26
Shank (mm)	6 - 12

From £233.24 £194.37

4-8 Flute Diamond Coated Carbide End Mill - 29.0305 (Karnasch)

4-8 Flute Diamond Coated Carbide End Mill - 29.0305 (Karnasch)

The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...

For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.

Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.

15° helix & unequal indexing prevent vibration at high speeds.

Optimal machining data must be determined during the run-in phase.

Diameter (mm)	3 - 20
Overall Length (mm)	40 - 96
Flute Length (mm)	10 - 40
Shank (mm)	4 - 20

From £153.25 £127.71

4 Flute Diamond Coated Carbide Corner Radius End Mill - GUF39 (YG-1)

4 Flute Diamond Coated Carbide Corner Radius End Mill - GUF39 (YG-1)

The GUF39 series from YG-1 is a diamond coated carbide corner radius end mill. Diameters range from 6-12mm and this comes with a 15° helix. These are suitable for use on For Carbon Fibre, Glass Rei...

For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.

Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.

15° helix provides high swarf evacuation.

Corner radius protects the cutting edge.

Diameter (mm)	10 - 12
Overall Length (mm)	80 - 100
Flute Length (mm)	30 - 36
Shank (mm)	10 - 12

From £264.16 £220.13

1 Flute Metric Solid Carbide Upcut Router - 13000 Series (LMT Belin)

1 Flute Metric Solid Carbide Upcut Router - 13000 Series (LMT Belin)

The 13000 series solid carbide router for wood, foamboard, PVC and high pressure composites....

Upcut tools are the most commonly used tools.
Chips are evacuted upwards when machining/li>
Workpieces need to be maintained properly because the tool pulls the material upwards

Diameter (mm)	1 - 14
Overall Length (mm)	30 - 120
Flute Length (mm)	4 - 62
Shank (mm)	2 - 14

From £33.43 £27.86

1 Flute Metric Solid Carbide Downcut Router - 12000 Series (LMT Belin)

1 Flute Metric Solid Carbide Downcut Router - 12000 Series (LMT Belin)

The 12000 series solid carbide router for wood, foamboard, PVC and high pressure composites. This kind of tool is often used for small parts and thin workpieces....

When cutting with a downcut end mill the chips are thrown downwards
There may be poor evacuation, however, the tool pushes the material downwards which helps for maintaining this
Often used for think workpieces and small parts
Recommended to have a space between sacrificial plate and material for correct chips evacuation

Diameter (mm)	1 - 12
Overall Length (mm)	30 - 80
Flute Length (mm)	2 - 12
Shank (mm)	4 - 38

From £33.43 £27.86

Solid Carbide Fibreglass Router Drill Point, Metric - 67-000 Series (LMT Onsrud)

Solid Carbide Fibreglass Router Drill Point, Metric - 67-000 Series (LMT Onsrud)

The 67-000 series Solid Carbide router from LMT Onsrud is designed as a fibreglass router. Their upcut/downcut diamond design effectively shears fibrous materials....

Application: fibreglass, composites
With drill, fine burr
Metric multi flute fibreglass router

Diameter (mm)	4 - 12
Overall Length (mm)	50 - 76
Flute Length (mm)	16 - 25
Shank (mm)	6 - 12

From £56.35 £46.96

2 Flute Solid Carbide Chipbreaker/Finisher Compression Spiral Router- 60-1000C Series (LMT Onsrud)

2 Flute Solid Carbide Chipbreaker/Finisher Compression Spiral Router- 60-1000C Series (LMT Onsrud)

The 60-100C series Solid Carbide router from LMT Onsrud is designed to give the optimum edge finish of the compression spiral bits along with the increased feed rates of the chipbreaker/finisher desig...

Application: double-sided laminated and veneered wood composites
Increased feed rates of the chipbreaker/finisher design
Designed to give the optimum edge finish
Mortise compressions are designed with short upcut to allow mortise cut with downcut action
Helix angle: 30°

From £186.60 £155.50

2 Flute Compression Spiral Solid Carbide Router - 60-100MW Series (LMT Onsrud)

2 Flute Compression Spiral Solid Carbide Router - 60-100MW Series (LMT Onsrud)

The 60-100MW series Solid Carbide router from LMT Onsrud is designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool...

Application: double-sided laminated and veneered wood composites
Superior finish, great tool life
2 flute max life compression spiral
Mortise compressions are designed with short upcut to allow mortise cut with downcut action

From £109.61 £91.34

8 Flute Diamond Coated Carbide Straight Cut Rougher Finisher - 29.1761 (Karnasch)

8 Flute Diamond Coated Carbide Straight Cut Rougher Finisher - 29.1761 (Karnasch)

The 29.1761 series from Karnasch is an Diamond coated carbide 8 flute rougher finisher with straight cut geometry. These are ideal for machining carbon fibre, glass reinforced plastics, honeycomb, alu...

For Carbon Fibre, Glass Reinforced Plastics, Honeycomb, Aluminium & Abrasive Engineered Plastics.

Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.

8 flutes, suitable for roughing and finishing.

STRAIGHT CUT GEOMETRY.

Diameter (mm)	4 - 20
Overall Length (mm)	60 - 120
Flute Length (mm)	16 - 70
Shank (mm)	6 - 20

From £181.10 £150.92

4&6 Flute Diamond Coated Carbide VR Style Compression Tool - 29.0416 (Karnasch)

4&6 Flute Diamond Coated Carbide VR Style Compression Tool - 29.0416 (Karnasch)

The 29.0416 series from Karnasch is a diamond coated carbide v.r-style compression tool. Diameters range from 6-12mm and the compression geometry prevents delamination on upper and lower edges in fibr...

For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.
Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.
V.R. compression geometry prevents delamination on upper and lower edges in fibre-reinforced plastics.
Available with air cooling channels (29.0417 series).

Diameter (mm)	10 - 10
Overall Length (mm)	72 - 72
Flute Length (mm)	25 - 25
Shank (mm)	10 - 10

From £251.18 £209.32

3 Flute Solid Carbide Router Compression Spiral - 60-100MW Series (LMT Onsrud)

3 Flute Solid Carbide Router Compression Spiral - 60-100MW Series (LMT Onsrud)

The 60-100MW series Solid Carbide router from LMT Onsrud is designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool...

Application: double-sided laminated and veneered wood composites
Superior finish, great tool life
3 flute max life compression spiral
Mortise compressions are designed with short upcut to allow mortise cut with downcut action

From £148.82 £124.02

1 Flute Solid Carbide Chamfering Router - EDC Series (LMT Belin)

1 Flute Solid Carbide Chamfering Router - EDC Series (LMT Belin)

The EDC series 1 flute solid carbide chamfering router for aluminium, wood, foamboard, PVC & high pressure composites....

Cutting end mills for plastics and woods with a 45° chamfer.
This cutter allows to cut materials and to make a chamfer at the same time
Avoid delamination when cutting laminated sheets or pasted paper sheets

Diameter (mm)	4 - 4
Overall Length (mm)	60 - 60
Flute Length (mm)	4.3 - 6.3
Shank (mm)	8 - 8

From £50.57 £42.14

1 Flute Imperial Solid Carbide Downcut Router - 12000 Series (LMT Belin)

1 Flute Imperial Solid Carbide Downcut Router - 12000 Series (LMT Belin)

The 12000 series solid carbide router for wood, foamboard, PVC and high pressure composites. This kind of tool is often used for small parts and thin workpieces....

When cutting with a downcut end mill the chips are thrown downwards
There may be poor evacuation, however, the tool pushes the material downwards which helps for maintaining this
Often used for think workpieces and small parts
Recommended to have a space between sacrificial plate and material for correct chips evacuation

From £54.53 £45.44

Solid Carbide Fibreglass Router Drill Point, Imperial - 67-000 Series (LMT Onsrud)

Solid Carbide Fibreglass Router Drill Point, Imperial - 67-000 Series (LMT Onsrud)

The 67-000 series Solid Carbide router from LMT Onsrud is designed as a fibreglass router. Their upcut/downcut diamond design effectively shears fibrous materials....

Application: fibreglass, composites
With drill, fine burr
Imperial multi flute fibreglass router

From £57.83 £48.19

4 Flute Solid Carbide Router DFC Coated, Imperial - 66-775 Series (LMT Onsrud)

4 Flute Solid Carbide Router DFC Coated, Imperial - 66-775 Series (LMT Onsrud)

The 66-775 series Solid Carbide router from LMT Onsrud is a tool is designed as a combination roughing and finishing tool in one....

Application: composite, fibreglass
The roughing profile reduces cutting forces
The geometry of the finishing flutes cleanly shear Fibres leaving a smooth edge on the workpiece material
Diamond coated (DFC) for increased tool life
4, 6 or 8 flute upcut low helix rougher finisher - Imperial

From £267.62 £223.02

1 & 2 Flute Metric Compression Spiral Solid Carbide Router - 60-100MW Series (LMT Onsrud)

1 & 2 Flute Metric Compression Spiral Solid Carbide Router - 60-100MW Series (LMT Onsrud)

The 60-100MW series Solid Carbide router from LMT Onsrud is designed for maximum life when cutting in highwear applications. Unique geometries and carbides improve the wear characteristics of the tool...

Application: double-sided laminated and veneered wood composites
Superior finish, great tool life
Metric - max life compression spiral
Mortise compressions are designed with short upcut to allow mortise cut with downcut action

Diameter (mm)	6 - 12
Overall Length (mm)	64 - 76
Flute Length (mm)	22 - 28
Shank (mm)	6 - 12

From £95.16 £79.30