Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Lathe Power Collet Chucks

Lathe Power Collet Chucks

A range of collet chucks available in a variety of sizes

Filter By arrow
carrat-down

9 Items

Sort By
carrat-down
sort-descending

This Collet Chuck can be used for turning or milling, front mount with recessed back....

  • Quickly change from chuck work to collet works
  • Mount in vertical mills, horizontal mills and machining centers
  • Drilled and tapped for fixture mounting

From £1,069.75 £891.46

This Collet Chuck can be used for turning or milling, front mount with recessed back....

  • Front mount with recessed back
  • Can be used for turning or milling

From £567.36 £472.80

Fully compatible with 5C or 16C collets (please check specification). Pull back type with direct mount system that mounts directly to the spindle to ensure a consistent mounting without the need for c...

  • Suitable for 5C or 16C collets.
  • Pull back style: The gripping pull-back action to actuate the collet chuck means the workpiece will be moved slightly in the Z-Axis.
  • This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut.
  • Low profile: Small nose diameter for superior tool clearance.
  • Made in Britain
  • Please contact technical to discuss connector requirements for your machine on 01924 869 615

From £922.36 £768.63

Fully compatible with DT collects (quick gun change style). Pull back type with direct mount system that mounts directly to the spindle to ensure a consistent mounting without the need for correction....

  • Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
  • First operation collet chuck: Klamp DHP collet chucks are suitable for collets which have a +/-0.5mm gripping range.
  • The collet chuck is suitable for rough and unfinished bar, preparing it for a high accuracy second operation work.
  • Pull back action: The collet is pulled into the chuck to close and pushed out to open. This action means that back stops cannot be provided and must be used where accurate axial positioning is not important.
  • Case hardened: Optimising the rigidity, strength and durability.
  • Short body, wide range: DT collets allow for a compact body design maximising the lathe work envelope. Gripping capacities of the series range from 3mm to 80mm.
  • Made in the United Kingdom

From £1,354.38 £1,128.65

Fully compatible with DT collects (quick gun change style). Fixed length type with direct mount system that mounts directly to the spindle to ensure a consistent mounting without the need for correcti...

  • Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
  • First & second operation collet chuck: Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations.
  • Klamp DKF collet chucks are suitable for collets which have a +/-0.5mm gripping range.
  • Fixed length: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning. A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
  • Case hardened: Optimising the rigidity, strength and durability.
  • Short body, wide range: DT collets allow for a compact body design maximising the lathe work envelope. Gripping capacities of the series range from 3mm to 80mm.
  • Made in the United Kingdom

From £2,393.78 £1,994.82

Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. Standard fixed nut, short body type with direct mount system that mounts directly to the spindle to ensure a consisten...

  • Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
  • First operation collet chuck: Suitable for collets which have a large gripping range.
  • Allowing the collet chuck to handle very rough and unfinished bar, preparing it for a high accuracy second operation (NOT SUITABLE FOR SPRING COLLETS).
  • Fixed length collet: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning.
  • A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
  • Ideal for bar feeders: Designed to work with bar loaders and bar feeders by not interfering with the process of the bar feeder action.
  • Case hardened: Optimising the rigidity, strength and durability.
  • Made in the United Kingdom

From £2,056.33 £1,713.61

Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. Standard fixed nut, long body type with direct mount system that mounts directly to the spindle to ensure a consistent...

  • Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
  • First & second operation collet chuck: Suitable for spring, varibore and rubberflex collets increasing its flexibility.
  • Fixed length collet: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning.
  • A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
  • Ideal for bar feeders: Designed to work with bar loaders and bar feeders by not interfering with the process of the bar feeder action.
  • Case hardened: optimising the rigidity, strength and durability.
  • Made in the United Kingdom.

From £1,349.88 £1,124.90

New and improved ‘Crawford style’ CNC collet chuck with a quick change nut. Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. As per the direct mount system, which ...

  • As per the direct mount system except with interchangeable adaptors enables the collet chuck to be moved from one machine spindle nose to another.
  • Cost-effective as only additional adaptors and connectors are required.
  • The need for adjustment is minimal, meaning less machine downtime.
  • Made in the United Kingdom.

From £1,579.36 £1,316.13

New and improved ‘Crawford style’ CNC collet chuck with a quick change nut. Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. Direct mount system mounts directly to...

  • Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
  • First & second operation collet chuck: Suitable for spring, varibore and rubberflex collets increasing its flexibility.
  • Fixed length collet: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning.
  • A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
  • Case hardened: Optimising the rigidity, strength and durability.
  • Made in the United Kingdom.

From £1,640.15 £1,366.79