Aluminium & Non-Ferrous HSS Drills - HSS, HSS Cobalt & Powder Metal Drills

Worm Pattern HSS 5 Percent Cobalt Jobber Drill - DL508 (YG-1)

The DL508 series YG-1 HSS 5 Percent cobalt jobber drills have a worm pattern geometry which feature a parabolic u-shaped flute for efficient chip evacuation. Excellent for soft or long chipping materi...

5xD Jobber Drill.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Excellent for soft or long chipping materials.

Size

Diameter (mm)	2 - 16
Overall Length (mm)	49 - 178
Flute Length (mm)	24 - 120
Shank (mm)	2 - 16

From £2.41 £2.01

View Products

Uncoated HSS Jobber Drill for Aluminium - D1106 (YG-1)

The D1106 series YG-1 HSS jobber drill has a special design with deep flute pockets for Aluminium drilling. These are also suitable for drilling brass, bronze and magnesium alloys. The bright finish p...

5xD Jobber Drill.
Made from a HSS substrate.
Bright finish for aluminium drilling.
Suitable for machining Aluminium & Bronze.
Special design with deep flute pockets for aluminium drilling.
Also suitable for drilling brass, bronze, magnesium alloys.
Bright finish prevents built up edge.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Size

Diameter (mm)	1.5 - 13
Overall Length (mm)	40 - 151
Flute Length (mm)	18 - 101
Shank (mm)	1.5 - 13

From £1.34 £1.12

View Products

Uncoated HSS Jobber Drill for Brass/Bronze - D1100 (YG-1)

The D1100 series YG-1 HSS Jobber Drills have a special geometry making them ideal for Brass and Bronze. The 15-20° helix and 118° drill point is ideal for drilling short chipping copper alloys. Diam...

5xD Jobber Drill.
Made from a HSS substrate.
Bright Finish for non-ferrous materials.
Suitable for machining Hard, Brittle and Short-Chip Materials, i.e. Brass, Bronze, Phosphor Bronze & Magnesium Alloys.
Special geometry with 15-20° helix & 118° drill point for drilling short chipping copper alloys including brass & phosper bronze.

Size

Diameter (mm)	1.5 - 13
Overall Length (mm)	40 - 151
Flute Length (mm)	18 - 101
Shank (mm)	1.5 - 13

From £0.83 £0.69

View Products

Worm Pattern HSS 5 Percent Cobalt Stub Drill - DL510 (YG-1)

The DL510 series YG-1 HSS 5 Percent cobalt stub drills have a worm pattern geometry which feature a parabolic u-shaped flute for efficient chip evacuation. Excellent for soft or long chipping material...

3xD Jobber Drill.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Excellent for soft or long chipping materials.

Size

Diameter (mm)	2 - 20
Overall Length (mm)	38 - 131
Flute Length (mm)	12 - 66
Shank (mm)	2 - 20

From £2.21 £1.84

View Products

Worm Pattern HSS 5 Percent Cobalt Long Length Drill - DL509 (YG-1)

The DL509 series YG-1 HSS 5 Percent cobalt jobber drills have a worm pattern geometry which feature a parabolic u-shaped flute for efficient chip evacuation. Excellent for soft or long chipping materi...

10xD Long Length Drill.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Excellent for soft or long chipping materials.

Size

Diameter (mm)	2 - 12
Overall Length (mm)	85 - 195
Flute Length (mm)	56 - 128
Shank (mm)	2 - 12

From £1.40 £1.17

View Products

Worm Pattern HSS 5 Percent Cobalt Extra Long Length 15xD Drill - DT600 (YG-1)

The DT600 series YG-1 HSS 5 Percent cobalt extra long 15xD drills have a worm pattern geometry which feature a parabolic u-shaped flute for efficient chip evacuation. Excellent for deep hole drilling ...

15xD Extra Long Length Drill for Deep Hole Drilling.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Excellent for soft or long chipping materials.

Size

Diameter (mm)	2 - 10.5
Overall Length (mm)	125 - 265
Flute Length (mm)	85 - 185
Shank (mm)	2 - 10.5

From £7.55 £6.29

View Products

Worm Pattern HSS 5 Percent Cobalt Extra Long Length 20xD Drill - DT692 (YG-1)

The DT600 series YG-1 HSS 5 Percent cobalt extra long 20xD drills have a worm pattern geometry which feature a parabolic u-shaped flute for efficient chip evacuation. Excellent for deep hole drilling ...

20xD Extra Long Length Drill for Deep Hole Drilling.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Excellent for soft or long chipping materials.

Size

Diameter (mm)	3 - 10.2
Overall Length (mm)	190 - 340
Flute Length (mm)	130 - 235
Shank (mm)	3 - 10.2

From £13.63 £11.36

View Products

Worm Pattern HSS 5 Percent Cobalt Extra Long Length 25xD Drill - DT693 (YG-1)

The DT693 series YG-1 HSS 5 Percent cobalt extra long 25xD drills have a worm pattern geometry which feature a parabolic u-shaped flute for efficient chip evacuation. Excellent for deep hole drilling ...

25xD Extra Long Length Drill for Deep Hole Drilling.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Excellent for soft or long chipping materials.

Size

Diameter (mm)	4 - 10
Overall Length (mm)	280 - 430
Flute Length (mm)	190 - 295
Shank (mm)	4 - 10

From £26.62 £22.18

View Products

Worm Pattern HSS 5 Percent Cobalt Extra Long Length Drill - DL507 (YG-1)

The DL507 series YG-1 HSS 5 Percent cobalt extra long have a worm pattern geometry which feature a parabolic u-shaped flute for efficient chip evacuation. Excellent for deep hole drilling in soft or l...

15xD / 20xD / 25xD Extra Long Length Drill.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Special design for deep hole aluminium drilling.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Sold in single pack sizes.

Size

Diameter (mm)	2 - 13
Overall Length (mm)	75 - 300
Flute Length (mm)	40 - 180
Shank (mm)	2 - 13

From £3.28 £2.73

View Products

Morse Taper Worm Pattern HSS 5 Percent Cobalt Long Length Drill - DL608 (YG-1)

The DL608 series HSS 5 Percent cobalt long length morse taper drills have a worm pattern design that feature a prabolic u-shaped flute for efficient chip evacuation. Ideal for deep hole drilling of No...

8xD Long Length Drill.
Morse Taper shank.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Non Alloy Steels, Alloy Steels, Grey Cast Iron, Malleable Cast Iron, Special Aluminum or Magnesium Alloys.
Special design for deep hole aluminium drilling.
Worm pattern drills feature a parabolic u-shaped flute for efficient chip evacuation.
Bright finish prevents built up edge and deep flute pockets prevent chip clogging.
Sold in single pack sizes.

Size

Diameter (mm)	13 - 30
Overall Length (mm)	215 - 351
Flute Length (mm)	134 - 230

From £63.58 £52.98

View Products