HSS Drill Sets - HSS, HSS Cobalt & Powder Metal Drills

TiN Coated HSS 5% Cobalt Jobber Drill Set - DLGP-HSS-SET Series (YG-1)

This TiN Coated DLGP HSS 5% Cobalt 5xD jobber drill set comes in either a 19 piece (1-10mm in 0.5mm increments) set, 25 piece (1-3mm in 0.5mm increments or 1-10.5mm in 0.5mm increments) set or 91 piec...

GOLD-P TiN Coated 5% Cobalt HSS Drill Set
5xD Jobber Length Drills.
DLGP195SET1 - 1-10mm in 0.5mm increments (19 pcs - 1mm, 1.5mm, 2mm, 2.5mm, 3mm......, 10mm).
DLGP195SET2 - 1-13mm in 0.5mm increments (25 pcs - 1mm, 1.5mm, 2mm, 2.5mm, 3mm......, 13mm).
DLGP195SET3 - 1-10.5mm in 0.5mm increments (25 pcs - 1mm, 1.5mm, 2mm, 2.5mm, 3mm......, 10.5mm - includes 3.3mm, 4.2mm, 6.8mm & 10.2mm).
DLGPSET982 - 1-10mm in 0.1mm increments (91 pcs - 1.1mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm......, 10mm).
TiN coating on working area with 5% cobalt content reduces cost and increases tool life compared to standard HSS drills).
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.
Ideal for general drilling on all materials.
Great performance across all machining conditions.

From £65.47 £54.56

View Products

TiN Coated Combo Tap & Gold-P Drill Set - TD84-GLP-SET Series (YG-1)

This TiN coated Combo Tap & DLGP 5% Cobalt TiN coated jobber drill set comes in a 13 piece set (7 Combo Taps & 6 GOLD-P Drills) with either spiral point or spiral flute taps. It is ideal for general d...

GOLD-P TiN Coated 5% Cobalt HSS Dril & TiN Coated Combo Tap Set.
5xD Jobber Length Drills.
TD814SET7-GLP195 includes spiral point combo taps.
TD804SET7-GLP195 includes spiral flute combo taps.
Drill sizes included: 2.5mm, 3.3mm, 4.2mm, 6.8mm, 8.5mm & 10.2mm
Tap sizes included: M3, M4, M5, M6, M8, M10 & M12.
TiN coating on GOLD-P working area with 5% cobalt content reduces cost and increases tool life compared to standard HSS drills).
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.
The YG-1 COMBO TAP series is the bestselling machine tap for general purpose machining. It is excellent in general tapping of a wide range of materials including low to medium hardness steels, stainless steels, cast iron, aluminium, copper, brass, titanium and nickel alloys.
Ideal for general drilling and tapping on all materials.

From £108.77 £90.64

View Products

TiALN Coated HSS 5% Cobalt Stub Drill Set - (YG-1)

This TiALN Coated HSS 5% Cobalt 5xD jobber drill set comes in an 81 piece set from 2-10mm in 0.1mm steps. The 5% cobalt substrate with TiALN coating ensures greater toughness and tool life over standa...

TiALN Coated HSS Drill Set.
3xD Stub Length Drills.
DTSET978 - 2-10mm jobber length drills in 0.1mm steps (81 pcs - 2mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm......, 10mm).
DTSET979 - 2-10mm stub length drills in 0.1mm steps (81 pcs - 2mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm......, 10mm).
TiALN coating and 5% Cobalt substrate ensures increased wear resistance and tool life.
Ideal for general drilling on all materials.
Good performance in good or bad machining conditions.

From £438.90 £365.75

View Products

Uncoated Combo Tap & Gold-P Drill Set - TC87-GLP-SET Series (YG-1)

This Uncoated Combo Tap & DLGP 5% Cobalt TiN coated jobber drill set comes in a 13 piece set (7 Combo Taps & 6 GOLD-P Drills) with either spiral point or spiral flute taps. It is ideal for general dri...

GOLD-P TiN Coated 5% Cobalt HSS Dril & Uncoated Combo Tap Set.
5xD Jobber Length Drills.
TC814SET7-GLP195 includes spiral point combo taps.
TC804SET7-GLP195 includes spiral flute combo taps.
Drill sizes included: 2.5mm, 3.3mm, 4.2mm, 6.8mm, 8.5mm & 10.2mm
Tap sizes included: M3, M4, M5, M6, M8, M10 & M12.
TiN coating on GOLD-P working area with 5% cobalt content reduces cost and increases tool life compared to standard HSS drills).
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.
The YG-1 COMBO TAP series is the bestselling machine tap for general purpose machining. It is excellent in general tapping of a wide range of materials including low to medium hardness steels, stainless steels, cast iron, aluminium, copper, brass, titanium and nickel alloys.
Ideal for general drilling and tapping on all materials.