Rotary broach style annular cutters or drills for use on magnetic drilling machines. Avaialble in both HSS and TCT (tungsten carbide tipped), these are ideal for drilling through holes (not suitable for blind holes). Annular cutters/core drills are extremely efficient because they only cut the periphery of the hole (less material removal is required).
Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
These 50mm shank annular cutters from Cutwel Pro are designed to drill accurate, fast and efficient holes. Suitable for drilling steel, they are made from HSS and come with weldon shank....
Manufactured from high speed steel - tough and economical
Cost effective - cheaper than carbide and can be re-sharpened
Good metal removal - cuts precise, smooth, burr-free holes
High efficiency - faster and requires less power than a standard drill bit
Weldon shank - cylindrical shank which prevents slippage
These 25mm shank annular cutters from Cutwel Pro are designed to drill accurate, fast and efficient holes. Suitable for drilling steel, they are made from HSS and come with weldon shank....
Manufactured from high speed steel - tough and economical
Cost effective - cheaper than carbide and can be re-sharpened
Good metal removal - cuts precise, smooth, burr-free holes
High efficiency - faster and requires less power than a standard drill bit
Weldon shank - cylindrical shank which prevents slippage
Suitable for 50mm depth of cut, the Rotabroach Raptor M2AL cutters are high performance annular cutters, with specially designed tooth geometry that can only be found on Raptor cutters. Made from M2AL...
Suitable for 50mm depth of cut.
High performance annular cutters, with specially designed tooth geometry.
Made from HSS, for greater cutter hardness, optimum performance, increased speed of cut and maximum tool life.
HSS Raptors can cut materials up to a maximum tensile strength of 900N/mm².
When using annular cutters we always recommend you use a pilot pin.
Suitable for 25mm depth of cut, the Rotabroach Raptor M2AL cutters are high performance annular cutters, with specially designed tooth geometry that can only be found on Raptor cutters. Made from M2AL...
Suitable for 25mm depth of cut.
High performance annular cutters, with specially designed tooth geometry.
Made from HSS, for greater cutter hardness, optimum performance, increased speed of cut and maximum tool life.
HSS Raptors can cut materials up to a maximum tensile strength of 900N/mm².
When using annular cutters we always recommend you use a pilot pin.
