Rust Preventitive & Dewatering Fluids - General Lubricants, Anti-Corrosion & Rust Preventitives

Ambersil's Machine Oil FG is an extremely efficient and effective general-purpose lubricant and penetrating oil. For use on food processing equipment where incidental food contact may occur. Exhibits ...

For use in the food industry as a highly effective metal-to-metal lubricating film
NSF H1 registered (No. 137999 & 140249)
Formulated using only food grade acceptable components
Can be used as an anti-corrosion coating for metal parts in high humidity conditions
Contains no silicone
Operational temperature range: -18°C to +120°C

From £15.53 £12.94

View Products

40+ Protective Lubricant (Ambersil)

Ambersil 40+ is the complete maintenance treatement for protection against corrosion, water displacement, penetration on seized fasteners, lubrication and light surface rust removal. The protective lu...

A true multi-purpose "cure-all" for engineers
Used as a dewatering fluid, a penetrant on seized fasteners, a general lubricant and as a corrosion inhibitor
Excellent water displacement displacement performance
High dielectric strength, non-conductive film
Safe on most paints, plastics, rubbers, and all metals
Operational temperature range: -20°C to +115°C
"Finger-printing" resistant
Stays clean and bright, even in highly corrosive conditions

From £7.80 £6.50

View Products

Clear Mould Protective Spray (Ambersil)

Ambersil's Clear Mould Protective has been specifically designed for use on on clean, degreased mould surface tool, as a long-term protective during storage. It removes any surface moisture leaving a ...

Clear Mould Protective
Specially formulated as a long-term protective film against corrosion
Removes any surface moisture and leaves a non-greasy protective film
Clear, dry, non-staining film
Does not stain the moulding
NSF registered for use on food/beverage packing mould tools
Easily "moulded off"when product recommences
Waxy film allows handling and resists acid finger marks

From £19.84 £16.53

View Products

Waxy Corrosion Inhibitor Spray (Ambersil)

Ambersil Waxy Corrosion Inhibitor Spray, for use on ferrous metals as a long-term protective coating for stored equipment, or as a transportation film for trans-globalcomponent shipping...

Waxy Corrosion Inhibitor Spray
Film will not harden or crack
Forms a 'self-repairing' waxy film
Meets MIL-PRF-16173E
Can be used an as anti-seize/anti-rust treatement for fasteners
Will not stain or mark components
For use on ferrous materials
Long-term protective coating for storing equipment

From £406.96 £339.13

View Products

Rust Preventive 2437 (Millers Oils)

A light viscosity rust preventive with a capability of excellent coverage and penetration. Excellent water displacing properties and protection against atmospheric corrosion caused by salt, sulphur di...

For the protection of metals, depending upon the protection required, dewatering capabilities and flash point requirements.
Use by careful selection from our extensive range.
A range of rust preventives and dewatering fluids including light viscosity types with short-term shelf life through to waxy type long-term products.
The range also includes water extendable products which are free from organic solvents.
The dry film, longer term products do not attract dirt.
Oil based, high flash point products can be used where an oil residue is required.
The pure dewatering products are inter-operational for short term protection.
Waxy type products are suitable for longer term outdoor protection.
Solvent-free water extendable emulsions are more acceptable for the environment and the user.

From £141.72 £118.10

View Products