HSSE Machine Reamers
Produces high tolerance holes available in small 0.01mm increments. HSS 5% cobalt substrate gives increased tool life over standard HSS. Suitable for reaming Steel, Stainless Steel, Cast Iron and Non-Ferrous materials.
HSS-E machine reamers in 0.01mm increments from 0.95-12.05mm
- Produces high tolerance holes
- Available in small 0.01mm increments to ream any sized hole
- HSS 5% cobalt substrate gives increased tool life over standard HSS
- Suitable for reaming Steel, Stainless Steel, Cast Iron and Non-Ferrous materials.
- Improved surface finish
- HSSE Machine Taper Pin Reamer - 021010 Series (Beck)The 021010 series beck machine taper pin reamer has a 1:50 taper, that is designed for reaming a tapered hole, preparing it for use with a taper pin. These come with a plain shank and a spiral flute g ... read more >
- P
- K
- N
- HSSE Machine Taper Pin Reamer with Morse Taper Shank - 021011 Series (Beck)The 021011 series beck machine taper pin reamer has a 1:50 taper, that is designed for reaming a tapered hole, preparing it for use with a taper pin. These come with a morse taper shank and a spiral f ... read more >
- P
- K
- N
- HSS Hand Taper Reamer - 024011 Series (Beck)The 024011 series beck taper hand reamer is designed for reaming or finishing a hole ready for a morse taper. These come with a plain shank with square end and a straight flute geometry. ... read more >
- P
- K
- N
- HSSE Spiral Flute Machine Reamer in 0.01mm Increments (Beck)Beck HSSE Machine Reamers are available in 0.1mm increments from 0.95-12.05mm. These spiral flute reamers haare suitable for general reaming operations of Steel, Cast Iron and Non Ferrous materials. ... read more >
Uncoated High Speed Steel substrate.
Right hand cutting with spiral flute.
+0.004/+0.005mm tolerance.
0.01mm (10 micron) incr ... read more >- P
- K
- N
- Straight Flute HSS 5% Cobalt Chucking Reamer - K2101 (YG-1)The YG-1 K2101 series Reamer has a HSS 5% Cobalt substrate with sizes ranging from 2-20mm diameter. These come with plain shanks and are suitable for machining Steel, Stainless Steel, Cast Iron and No ... read more >HSS 5% Cobalt
Chucking Reamer
For Machining Steel, Stainless Steel, Cast Iron & Non-Ferrous
O.D. Tolerance DIN1420 for H7
Plai ... read more >- P
- M
- K
- N
- Left Hand Spiral Flute HSS 5% Cobalt Chucking Reamer - K2111 (YG-1)The YG-1 K2111 series Reamer has a HSS 5% Cobalt substrate with sizes ranging from 2-20mm diameter. These come with plain shanks and are suitable for machining Steel, Stainless Steel, Cast Iron and No ... read more >HSS 5% Cobalt
Chucking Reamer
For Machining Steel, Stainless Steel, Cast Iron & Non-Ferrous
O.D. Tolerance DIN1420 for H7
Plai ... read more >- P
- M
- K
- N
- Left Hand Spiral Flute HSS 5% Cobalt NC Machine Reamer - K21B1 (YG-1)The YG-1 K21B1 series Reamer has a HSS 5% Cobalt substrate with sizes ranging from 2-20mm diameter. These come with whole number shanks making them ideal for clamping within hydraulic chucks and ideal ... read more >HSS 5% Cobalt
NC Machine Reamers
For Machining Steel, Stainless Steel, Cast Iron & Non-Ferrous
O.D. Tolerance DIN1420 for H7 (except ... read more >- P
- M
- K
- N
- Quick Spiral HSS 5% Cobalt Chucking Reamer - K2121 (YG-1)The YG-1 K2121 series Reamer has a HSS 5% Cobalt substrate with sizes ranging from 4-20mm diameter. These come with plain shanks making and a quick spiral that is ideal for Aluminium and long chipping ... read more >HSS 5% Cobalt
Chucking Reamers
Quick Spiral Ideal for Aluminium & Long Chipping Materials
O.D. Tolerance DIN1420 for H7
Shank ... read more >- P
- N
- Straight Flute HSS 5% Cobalt Taper Shank Chucking Reamer - K2102 (YG-1)The YG-1 K2102 series Reamer has a HSS 5% Cobalt substrate with sizes ranging from 10-50mm diameter. These come with morse taper shank and are suitable for machining Steel, Stainless Steel, Cast Iron ... read more >HSS 5% Cobalt
Chucking Reamers
O.D. Tolerance DIN1420 for H7
For Machining Steel, Stainless Steel, Cast Iron & Non-Ferrous
Mor ... read more >- P
- H
- K
- N
- Left Hand Spiral Flute HSS 5% Cobalt Taper Shank Chucking Reamer - K2112 (YG-1)The YG-1 K2112 series Reamer has a HSS 5% Cobalt substrate with sizes ranging from 10-50mm diameter. These come with morse taper shank and are suitable for machining Steel, Stainless Steel, Cast Iron ... read more >HSS 5% Cobalt
Chucking Reamers
O.D. Tolerance DIN1420 for H7
For Machining Steel, Stainless Steel, Cast Iron & Non-Ferrous
Mor ... read more >- P
- H
- K
- N
- HNC ecoSpeed HSS Straight Flute Through Coolant Reamer for Through Holes - 033260 Series (Beck)The Beck HNC ecoSpeed series of HSS machine reamers can achieve up to four times the cutting speed, four times the feed rates and up to twice the tool life of conventional HSS machine reamers. Helped ... read more >Beck HNC ecoSpeed series, 4x the cutting speeds & feeds and up to 2x the tool life versus standard HSS reamers
Straight flute geometry for throu ... read more >- P
- K
- HNC ecoSpeed HSS Straight Flute Through Coolant Reamer for Blind Holes - 033261 Series (Beck)The Beck HNC ecoSpeed series of HSS machine reamers can achieve up to four times the cutting speed, four times the feed rates and up to twice the tool life of conventional HSS machine reamers. Helped ... read more >Beck HNC ecoSpeed series, 4x the cutting speeds & feeds and up to 2x the tool life versus standard HSS reamers
Straight flute geometry for blind ... read more >- P
- K