WTE Hydraulic Chucks

BT30 Long & Ultra Narrow 3° HPH Chuck 25,000RPM G2.5 (WTE)

BT30 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a Long & Ultra ...

Revolutionary Long & Narrow 3° Design can be used in applications only previously possible with shrink fit chucks
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 20

From £473.14 £394.28

View Products

HSK63F Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

HSK63F WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose pro...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	6 - 25

From £508.48 £423.73

View Products

SK40 Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

SK40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 20

From £248.21 £206.84

View Products

Sealed Through Coolant Hydraulic & HPH Chuck Reduction Sleeve (WTE)

These reduction sleeves can be used with all WTE hydraulic and HPH chucks. The sleeves are ground and highly polished to ensure the most accurate fit with the relevant chuck. The sleeves are coolant...

From £112.16 £93.47

View Products

BT50 Short & Rigid Hydraulic Chuck 25,000RPM G2.5 (WTE)

BT50 WTE Short & Rigid Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and are ideal for us...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	32 - 32

From £366.71 £305.59

View Products

BT40 Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

BT40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 20

From £263.10 £219.25

View Products

BT40 Ultra Slim 3° Shrink Fit Chuck 25,000RPM G2.5 (WTE)

BT40 WTE Ultra Slim 3° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in Germany and are used by leading Automotive, Aerospa...

Ultra slim 3° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 200mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 20

From £184.82 £154.02

View Products

BT40 Short & Heavy HPH Chuck KKB Type 25,000RPM G2.5 (WTE)

BT40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Through Coolant with KKB Resealable Coolant Bores
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 20

From £362.59 £302.16

View Products

BT40 Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

BT40 WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	10 - 20

From £396.48 £330.40

View Products

SK40 Ultra Short Hydraulic Chuck 25,000RPM G2.5 (WTE)

SK40 WTE Ultra Short Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and the ultra short de...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Ultra short design for extra-long drills
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	20 - 20

From £343.32 £286.10

View Products

HSK63A Short & Rigid Hydraulic Chuck 25,000RPM G2.5 (WTE)

HSK63A WTE Short & Rigid Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and are ideal for ...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	20 - 20

From £254.05 £211.71

View Products

HSK63F Ultra Slim 3° Shrink Fit Chuck 25,000RPM G2.5 (WTE)

HSK63F WTE Ultra Slim 3° Shrink Fit Chucks offer a high performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in germany and are used by leading manufacturers acr...

4.5° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 160mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 20

From £1,183.75 £986.46

View Products

HSK50A Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

HSK50A WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose pro...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	6 - 20

From £449.62 £374.68

View Products

SK40 Shrink Fit Chuck 25,000RPM G2.5 (WTE)

SK40 WTE Standard 4.5° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in Germany and are used by leading Automotive, Aerospa...

4.5° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 160mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 32

From £145.91 £121.59

View Products

SK50 Shrink Fit Chuck 25,000RPM G2.5 (WTE)

SK50 WTE Standard 4.5° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in Germany and are used by leading Automotive, Aerospa...

4.5° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 160mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 32

From £226.57 £188.81

View Products

HSK100A Shrink Fit Chuck 25,000RPM G2.5 (WTE)

HSK100A WTE Standard 4.5° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in Germany and are used by leading Automotive, Aero...

4.5° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 160mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	6 - 32

From £260.47 £217.06

View Products

SK40 Long & Ultra Narrow 3° HPH Chuck 25,000RPM G2.5 (WTE)

SK40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a Long & Ultra ...

Revolutionary Long & Narrow 3° Design can be used in applications only previously possible with shrink fit chucks
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 20

From £479.76 £399.80

View Products

HSK63A Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

HSK63A WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & hea...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	20 - 20

From £259.68 £216.40

View Products

HSK100A Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

HSK100A WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & he...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 32

From £342.07 £285.06

View Products

HSK63A Short & Heavy HPH Chuck KKB Type 25,000RPM G2.5 (WTE)

HSK63A WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & hea...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Through Coolant with KKB Resealable Coolant Bores
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 20

From £201.60 £168.00

View Products

BT50 Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

BT50 WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	20 - 32

From £533.57 £444.64

View Products

BT40 Shrink Fit Chuck 25,000RPM G2.5 (WTE)

BT40 WTE Standard 4.5° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in Germany and are used by leading Automotive, Aerospa...

4.5° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 160mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 32

From £161.04 £134.20

View Products

HSK32E Shrink Fit Chuck 25,000RPM G2.5 (WTE)

HSK32E WTE Standard 4.5° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in Germany and are used by leading Automotive, Aeros...

4.5° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 160mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 12

From £150.70 £125.58

View Products

HSK40F Shrink Fit Chuck 25,000RPM G2.5 (WTE)

HSK40F WTE Standard 4.5° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. WTE Shrink chucks are 100% made in Germany and are used by leading Automotive, Aeros...

4.5° Taper
Hardness 52±2HRc
Balanced to 25,000RPM G2.5 (up to 40,000rpm on request)
High run-out accuracy 0.003mm
Length adjustment screw
Gauge length up to 160mm
80 bar Maximum through coolant pressure
Shrink temperature 100-420° (Max 500°)
Ultra-long service life without distortion due to high quality hot work steel
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	3 - 12

From £1,161.92 £968.27

View Products

BT50 Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

BT50 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 32

From £318.36 £265.30

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

Cutwel