High quality solid steel shank turning tool holder suitable for use with CCMT style turning inserts (also suitable for CCGT, CCGW, CCET, CCHT etc). The SCLCR/L series have a Screw on clamping system f...
Suitable for use with CCMT style turning inserts (also suitable for CCGT, CCGW, CCET, CCHT etc)
High quality solid steel shank turning tool holder with 95° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with CNMG style turning inserts (also suitable for CNMA, CNMM, CNGA, CNGG etc). The PCLNR/L series have a Strong lever lock style cl...
Suitable for use with CNMG style turning inserts (also suitable for CNMA, CNMM, CNGA, CNGG etc)
High quality solid steel shank turning tool holder with 95° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDJCR/L series have a Screw on clamping system f...
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality solid steel shank turning tool holder with 93° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc). The SDNCN series have a Screw on clamping system for...
Suitable for use with DCMT style turning inserts (also suitable for DCGT, DCGW, DCET, DCHT etc)
High quality solid steel shank turning tool holder with 62.5° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with DNMG style turning inserts (also suitable for DNMA, DNMM, DNGA, DNGG etc). The PDJNR/L series have a Strong lever lock style cl...
Suitable for use with DNMG style turning inserts (also suitable for DNMA, DNMM, DNGA, DNGG etc)
High quality solid steel shank turning tool holder with 93° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with DNMG style turning inserts (also suitable for DNMA, DNMM, DNGA, DNGG etc). The PDNNN series have a Strong lever lock style clam...
Suitable for use with DNMG style turning inserts (also suitable for DNMA, DNMM, DNGA, DNGG etc)
High quality solid steel shank turning tool holder with 62.5° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with KNUX style turning inserts. The CKJNR/L series have a Top clamp style clamping system with a 93° degree approach angle. These ...
Suitable for use with KNUX style turning inserts
High quality solid steel shank turning tool holder with 93° degree approach angle
Top clamp style clamping system
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with RCGT style turning inserts (also suitable for RCMX & RCMT ). The SRDCN series have a Screw on clamping system for simple change...
Suitable for use with RCGT style turning inserts (also suitable for RCMX & RCMT )
High quality solid steel shank turning tool holder with 45° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with RCGT style turning inserts (also suitable for RCMX & RCMT ). The SRGCR/L series have a Screw on clamping system for simple chan...
Suitable for use with RCGT style turning inserts (also suitable for RCMX & RCMT )
High quality solid steel shank turning tool holder with 90° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with SCMT style turning inserts (also suitable for SCGT, SCGW, SCET, SCHT etc). The SSDCN series have a Screw on clamping system for...
Suitable for use with SCMT style turning inserts (also suitable for SCGT, SCGW, SCET, SCHT etc)
High quality solid steel shank turning tool holder with 45° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with SNMG style turning inserts (also suitable for SNMA, SNMM, SNGA, SNGG etc). The PSDNN series have a a Strong lever lock style cl...
Suitable for use with SNMG style turning inserts (also suitable for SNMA, SNMM, SNGA, SNGG etc)
High quality solid steel shank turning tool holder with 45° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with SNMG style turning inserts (also suitable for SNMA, SNMM, SNGA, SNGG etc). The PSSNR/L series have a Strong lever lock style cl...
Suitable for use with SNMG style turning inserts (also suitable for SNMA, SNMM, SNGA, SNGG etc)
High quality solid steel shank turning tool holder with 45° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with TCMT style turning inserts (also suitable for TCGT, TCGW, TCET, TCHT etc). The STFCR/L series have a Screw on clamping system f...
Suitable for use with TCMT style turning inserts (also suitable for TCGT, TCGW, TCET, TCHT etc)
High quality solid steel shank turning tool holder with 90° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with TCMT style turning inserts (also suitable for TCGT, TCGW, TCET, TCHT etc). The STGCR/L series have a Screw on clamping system f...
Suitable for use with TCMT style turning inserts (also suitable for TCGT, TCGW, TCET, TCHT etc)
High quality solid steel shank turning tool holder with 90° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with TNMG style turning inserts (also suitable for TNMA, TNMM, TNGA, TNGG etc). The PTGNR/L series have a Strong lever lock style cl...
Suitable for use with TNMG style turning inserts (also suitable for TNMA, TNMM, TNGA, TNGG etc)
High quality solid steel shank turning tool holder with 90° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with TNMG style turning inserts (also suitable for TNMA, TNMM, TNGA, TNGG etc). The MTJNR/L series have a Multi lock style clamping ...
Suitable for use with TNMG style turning inserts (also suitable for TNMA, TNMM, TNGA, TNGG etc)
High quality solid steel shank turning tool holder with 93° degree approach angle
Multi lock style clamping system
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with VBMT and VBGT style turning inserts. The SVVBN series have a Screw on clamping system for simple changeover with wrench and scr...
Suitable for use with VBMT and VBGT style turning inserts
High quality solid steel shank turning tool holder with 72.5° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with VBMT and VBGT style turning inserts. The SVJBR/L series have a Screw on clamping system for simple changeover with wrench and s...
Suitable for use with VBMT and VBGT style turning inserts
High quality solid steel shank turning tool holder with 93° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with VCMT style turning inserts (also suitable for VCGT, VCGW, VCET, VCHT etc. The SVVCN series have a Screw on clamping system for ...
Suitable for use with VCMT style turning inserts (also suitable for VCGT, VCGW, VCET, VCHT etc
High quality solid steel shank turning tool holder with 72.5° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with VCMT style turning inserts (also suitable for VCGT, VCGW, VCET, VCHT etc. The SVJCR/L series have a Screw on clamping system fo...
Suitable for use with VCMT style turning inserts (also suitable for VCGT, VCGW, VCET, VCHT etc
High quality solid steel shank turning tool holder with 93° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with VNMG style turning inserts (also suitable for VNMA, VNMM, VNGA, VNGG etc). The TVJNR/L series have a Hole clamp style clamping ...
Suitable for use with VNMG style turning inserts (also suitable for VNMA, VNMM, VNGA, VNGG etc)
High quality solid steel shank turning tool holder with 93° degree approach angle
Hole clamp style clamping system
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc). The PWLNR/L series have a Strong lever lock style cl...
Suitable for use with WNMG style turning inserts (also suitable for WNMA, WNMM, WNGA, WNGG etc)
High quality solid steel shank turning tool holder with 95° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with SCMT style turning inserts (also suitable for SCGT, SCGW, SCET, SCHT etc). The SSSCR/L series have a Screw on clamping system f...
Suitable for use with SCMT style turning inserts (also suitable for SCGT, SCGW, SCET, SCHT etc)
High quality solid steel shank turning tool holder with 45° degree approach angle
Screw on clamping system for simple changeover with wrench and screw
Made by YG-1, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum
High quality solid steel shank turning tool holder suitable for use with TNMG style turning inserts (also suitable for TNMA, TNMM, TNGA, TNGG etc). The PTFNR/L series have a Strong lever lock style cl...
Suitable for use with TNMG style turning inserts (also suitable for TNMA, TNMM, TNGA, TNGG etc)
High quality solid steel shank turning tool holder with 90° degree approach angle
Strong lever lock style clamping system - the most common clamping system for general machining with quick and simple changeover of inserts
Made by Korloy, for the best performance its recommended to clamp on 1/3 of the bar's length, as a minimum.
