YG-1 Hydraulic Chucks

Sealed Through Coolant Hydraulic Chuck Reduction Sleeve - HS Series (YG-1)

These reduction sleeves are suitable for use with hydraulic expansion chucks. They allow a range of different sized tooling to be clamped in a single tool holder. The HS series from YG-1 are sealed (c...

Closed sleeves for through coolant drills.
Suitable for use with hydraulic expansion chucks

From £68.86 £57.38

View Products

Hydraulic Chuck Reduction Sleeve - HK Series (YG-1)

The HK Series reduction sleeves by YG-1 are designed to enhance the versatility of hydraulic chucks. They allow for the accommodation of various tool shank sizes within a single chuck, thereby increas...

Ideal for a variety of machining tasks including milling, drilling and reaming
HK series - Offers a range of sizes to fit different tool shanks
The sleeve is cut into three sections using high-precision cutting to ensure accurate inner diameters and robust clamping force
The open-type design is suitable for non-coolant through tools, facilitating easy installation and removal

From £58.91 £49.09

View Products

BT40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
Up to 300% more tool life than ER Collet Chucks
Sleeves included: 1 x 6,8,10,12 &16mm
Up to 900Nm clamping force
Perfect surface finish – no chatter marks
Push feed rates up to 30% higher
Minimum noise
Change cutting tool in seconds with 3 micron repeatability
3 micron run-out accuracy, balanced to 25,000RPM
Contains 20mm BT40 toolholder
Compact design
Suitable for through coolant tools

Diameter (mm)	20 - 20

From £446.26 £371.88

View Products

SK40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
Up to 300% more tool life than ER Collet Chucks
Sleeves included: 1 x 6,8,10,12 &16mm
Up to 900Nm clamping force
Perfect surface finish – no chatter marks
Push feed rates up to 30% higher
Minimum noise
Change cutting tool in seconds with 3 micron repeatability
3 micron run-out accuracy, balanced to 25,000RPM
Contains 20mm BT40 toolholder
Compact design
Suitable for through coolant tools

Diameter (mm)	20 - 20

From £392.70 £327.25

View Products

HSK63A Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK63A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice w...

HSK63A back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
80mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	12 - 20

From £184.78 £153.98

View Products

BT30 Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT30 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	8 - 20

From £216.48 £180.40

View Products

BT40 Long, Slim & Tapered Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 Long, Slim & Tapered Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and are ideal for 5 axis machin...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
3°taper (per side), ideal for moulds
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 20

From £272.35 £226.96

View Products

SK40 Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 32

From £207.98 £173.32

View Products

Hydraulic Chuck Reduction Sleeve with Direct Coolant Jet - HF Series (YG-1)

The HF Series reduction sleeves by YG-1 are designed to enhance the versatility of hydraulic chucks, particularly for applications requiring direct coolant delivery....

Ideal for a variety of machining tasks including milling, drilling and reaming
HF series - Offers a range of sizes to fit different tool shanks
Provides accurate and robust clamping force, ensuring tool stability and precision
Sleeve for internal coolant flush

From £87.52 £72.93

View Products

SK40 Ultra Short Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 Ultra Short Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and the ultra short design makes them id...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Ultra short design for extra-long drills
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	20 - 20

From £325.46 £271.22

View Products

BT40 Ultra Short Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 Ultra Short Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and the ultra short design makes them id...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Ultra short design for extra-long drills
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	20 - 20

From £325.46 £271.22

View Products

BT40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

BT40 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 58mm or 72.5mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	12 - 20

From £140.26 £116.88

View Products

BT40 Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 32

From £207.98 £173.32

View Products

SK40 Long, Slim & Tapered Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 Long, Slim & Tapered Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and are ideal for 5 axis machin...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
3°taper (per side), ideal for moulds
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	20 - 34

From £272.35 £226.96

View Products

HSK63A Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK63A YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for no...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 32

From £279.25 £232.71

View Products

SK40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

SK40 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 50mm or 64.5mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	12 - 20

From £140.26 £116.88

View Products

HSK32A Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK32A YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for no...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 12

From £308.42 £257.02

View Products

SK50 Short & Rigid Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK50 YG-1 Short & Rigid Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and are ideal for use with hydraulic s...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	20 - 20

From £613.54 £511.28

View Products

BT30 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT30 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

BT30 back end type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 69mm or 90mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	12 - 20

From £217.88 £181.57

View Products

HSK63A Slim & Tapered Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK63A YG-1 Long, Slim & Tapered Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and are ideal for 5 axis mach...

HSK63A Hydraulic Chucks
YG-1 hydraulic chucks offer exceptional value whilst maintaining quality and performance
Balanced to 25,000RPM G2.5
Long, slim and tapered design, ideal for 5 axis machining or mould & die
Hydraulic chucks are much higher performance than conventional tool holders
Quicker set up times, high run out accuracy and increased tool life

Diameter (mm)	6 - 20

From £459.37 £382.81

View Products

HSK40E Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK40E YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for no...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 16

From £436.64 £363.87

View Products

BT50 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT50 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

BT50 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 83.5mm or 90mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	12 - 32

From £140.26 £116.88

View Products

BT40 Ultra-Short Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	20 - 20

From £325.46 £271.22

View Products

HSK100A Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK100A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice ...

HSK100A back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 90mm or 100mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	20 - 32

From £282.23 £235.19

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

Cutwel