Shop By Material

2 Flute Lapped Alu-Power Carbide Slot Drill - E5D71 (YG-1)

The E5D71 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 2 flute cutters have lapped flutes for exceptional surface finish and are ideal on Aluminium and Non-Ferrous m...

Suitable for high speed machining in aluminium and other non-ferrous machining.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Wide cut geometry, ideal for plastics such as ABS, acrylic and non-ferrous metals.

Cylindrical relief reduces chipping of corner edges.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	1 - 20
Overall Length (mm)	50 - 110
Flute Length (mm)	3 - 55
Shank (mm)	6 - 20

From £30.26 £25.22

View Products

3 Flute 45 Degree Helix Lapped Alu-Power Carbide Slot Drill - E5D70 (YG-1)

The E5D70 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 3 flute cutters are ideal for mirror finish machining Aluminium and Non-Ferrous materials....

Suitable for machining of aluminium and other non-ferrous machining.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy achieved.

Cylindrical relief reduces chipping of corner edges.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	1 - 20
Overall Length (mm)	40 - 150
Flute Length (mm)	3 - 75
Shank (mm)	6 - 20

From £27.54 £22.95

View Products

3 Flute Lapped Alu-Power Carbide Reduced Neck Slot Drill - E5E83 (YG-1)

The E5E83 series carbide Alu-Power cutters from YG-1 range from 1-12mm in diameter. These 3 flute cutters are ideal for machining Aluminium and Non-Ferrous materials....

Suitable for machining of aluminium and other non-ferrous machining.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy achieved.

High metal removal rates.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	1 - 12
Overall Length (mm)	60 - 110
Flute Length (mm)	2.5 - 30
Shank (mm)	4 - 12

From £40.60 £33.83

View Products

2 Flute Alu-Power Carbide Corner Radius Reduced Neck Slot Drill - E5930 (YG-1)

The E5930 series carbide Alu-Power cutters from YG-1 range from 2-20mm in diameter. These 2 flute corner radius cutters have a 25 degree helix ideal for machining Aluminium and Non-Ferrous materials....

Suitable for high speed machining of aluminium and other non-ferrous machining.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Corner radius edge prep to prevent tool chipping.

High metal removal rates.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	2 - 20
Overall Length (mm)	40 - 100
Flute Length (mm)	3 - 25
Shank (mm)	3 - 20

From £15.26 £12.72

View Products

2 Flute Alu-Power Carbide Corner Radius Reduced Neck Slot Drill - E5909 (YG-1)

The E5909 series carbide Alu-Power cutters from YG-1 range from 4-20mm in diameter. These 2 flute corner radius cutters are ideal for machining Aluminium and Non-Ferrous materials....

Suitable for high speed machining of aluminium and other non-ferrous machining.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Reduced neck diameter for longer reach,

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	4 - 20
Overall Length (mm)	50 - 100
Flute Length (mm)	5 - 24
Shank (mm)	6 - 20

From £23.76 £19.80

View Products

3 Flute Lapped Alu-Power Carbide Corner Radius Slot Drill - E5E51 (YG-1)

The E5E51 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 3 flute corner radius cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and N...

Suitable for high speed machining of aluminium and other non-ferrous machining.
Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
Deep flute pockets prevent swarf clogging up the tool.
Increased tool life and higher cutting accuracy.
High metal removal rates.
Micrograin Carbide Substrate.
Sharp cutting edges with mirror finish machining.
Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	3 - 20
Overall Length (mm)	57 - 100
Flute Length (mm)	12 - 40
Shank (mm)	6 - 20

From £14.83 £12.36

View Products

2 Flute Lapped Alu-Power Carbide Ball Nose Slot Drill - E5D80 (YG-1)

The E5D80 series carbide Alu-Power cutters from YG-1 range from 0.5-12mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non...

Suitable for high speed machining of aluminium and other non-ferrous materials.
Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
Deep flute pockets prevent swarf clogging up the tool.
Increased tool life and higher cutting accuracy.
Ball nosed geometry.
Micrograin Carbide Substrate.
Sharp cutting edges with mirror finish machining.
Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	0.5 - 12
Overall Length (mm)	40 - 110
Flute Length (mm)	1 - 22
Shank (mm)	3 - 12

From £17.63 £14.69

View Products

2 Flute Lapped Alu-Power Carbide Ball Nose Reduced Neck Slot Drill - E5910 (YG-1)

The E5910 series carbide Alu-Power cutters from YG-1 range from 6-20mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-F...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Reduced neck for longer reach.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	6 - 20
Overall Length (mm)	55 - 100
Flute Length (mm)	5.5 - 17
Shank (mm)	6 - 20

From £26.11 £21.76

View Products

3 Flute Lapped Alu-Power Carbide Ball Nose Reduced Neck Slot Drill - E5908 (YG-1)

The E5908 series carbide Alu-Power cutters from YG-1 range from 2-16mm in diameter. These 3 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-F...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	2 - 16
Overall Length (mm)	60 - 100
Flute Length (mm)	3 - 24
Shank (mm)	6 - 16

From £28.61 £23.84

View Products

3 Flute Alu-Power Carbide Chamfer Prep Plain Shank Alu Pitch Rougher - E5742 (YG-1)

The E5742 series carbide Alu-Power rippers from YG-1 range from 6-25mm in diameter. These plain shank 3 flute rougher cutters have an aluminium pitch to prevent built up edge. These are ideal for heav...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Aluminium pitch prevents built up edge.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 121
Flute Length (mm)	16 - 45
Shank (mm)	6 - 25

From £34.54 £28.78

View Products

3 Flute Lapped 50 Degree Helix Carbide A+ Aluminium End Mill - APFE3 (Korloy)

The Korloy APFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ rang...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

U-Shaped flute design for extreme quality surface finish.

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Diameter (mm)	2.5 - 20
Overall Length (mm)	50 - 100
Flute Length (mm)	8 - 45
Shank (mm)	6 - 20

From £25.37 £21.14

View Products

3 Flute Lapped 50 Degree Helix Carbide Long Length A+ Aluminium End Mill - APLFE3 (Korloy)

The Korloy APLFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These long length end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate...

Suitable for high speed machining& of aluminium and other non-ferrous materials.
Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
U-Shaped flute design for extreme quality surface finish.
Deep flute pockets prevent swarf clogging up the tool.
High rigidity on the cutting edge ensures high productivity.
Micrograin Carbide Substrate.
Excellent chip evacuation even in high feed machining.

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 150
Flute Length (mm)	12 - 75
Shank (mm)	6 - 20

From £27.91 £23.26

View Products

3 Flute Lapped 45 Degree Helix Carbide A+ Aluminium Ripper - APRE (Korloy)

The Korloy APRE series A+ mirror finish aluminum cutter has 2 flutes and a plain shank. These roughers range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ range ...

Suitable for high speed roughing of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium..

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Roughing geometry prevents built up edge.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Diameter (mm)	4 - 25
Overall Length (mm)	50 - 105
Flute Length (mm)	8 - 50
Shank (mm)	6 - 25

From £44.39 £36.99

View Products

2 Flute 42 Degree Helix Alu-Cut Uncoated HSS 8% Cobalt Long Length Slot Drill - E2464 (YG-1)

The YG-1 E2464 standard length slot drill has 2 flutes and a weldon shank. They range in diameter from 1-32mm and have a special Alu-Cut geometry with a 42 Degree Helix angle. The HSS 8% Cobalt Substr...

Exceptional value and tool life.
Available with a weldon shank.
Alu-Cut geomotry makes this cutter ideal for non-ferrous machining.
42° Helix gives deeper flute pockets for quick chip clearance and to prevent flutes clogging.
Wide range of geomotries and sizes available for a variety of milling applications.
Uncoated to prevent 'sticking' of material to cutter.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Diameter (mm)	1 - 32
Overall Length (mm)	49 - 133
Flute Length (mm)	3 - 53
Shank (mm)	6 - 32

From £12.54 £10.45

View Products

4-8 Flute Diamond Coated Carbide End Mill - 29.0305 (Karnasch)

The 29.0305 series from Karnasch is a diamond coated carbide end mill. Diameters range from 3-20mm and the 15° helix with unequal indexing prevent vibration at high speeds These are suitable for use...

For Carbon Fibre, Glass Reinforced Plastics, Kevlar, Aramid & Highly Abrasive Engineered Plastics.

Diamond Coated Carbide is highly effective for machining most composite materials, ideal where tool cost is import or a special geometry is required.

15° helix & unequal indexing prevent vibration at high speeds.

Optimal machining data must be determined during the run-in phase.

Diameter (mm)	3 - 20
Overall Length (mm)	40 - 96
Flute Length (mm)	10 - 40
Shank (mm)	4 - 20

From £153.25 £127.71

View Products

2 Flute X-Power Pro Carbide Ball Nose Long Neck Slot Drill - GM886 (YG-1)

The YG-1 GM886 series ranges from 0.5-6mm diameter and has an advanced Z Coating with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable for ...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced Z Coating developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Diameter (mm)	0.5 - 6
Overall Length (mm)	45 - 90
Flute Length (mm)	0.7 - 9
Shank (mm)	4 - 6

From £43.60 £36.33

View Products

6-8 Flute X-Power Pro Carbide 45 Degree Helix Long Length End Mill - GM812 (YG-1)

The YG-1 GM812 series ranges from 6-20mm diameter and has an advanced Z Coating with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable for h...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced Z Coating developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Diameter (mm)	6 - 20
Overall Length (mm)	57 - 104
Flute Length (mm)	13 - 38
Shank (mm)	6 - 20

From £47.92 £39.93

View Products

6 Flute X-Power Pro Carbide 45 Degree Helix Long Length End Mill - GM834 (YG-1)

The YG-1 GM834 series ranges from 6-25mm diameter and has an advanced Z Coating with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable for h...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced Z Coating developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Diameter (mm)	6 - 25
Overall Length (mm)	70 - 180
Flute Length (mm)	26 - 92
Shank (mm)	6 - 25

From £62.27 £51.89

View Products

3-4 Flute X-Power Pro Carbide 20 Degree Helix Long Length Fine Pitch Ripper - GM814 (YG-1)

The YG-1 GM814 series ranges from 6-20mm diameter and has an advanced Z Coating with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable for h...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced Z Coating developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Diameter (mm)	6 - 20
Overall Length (mm)	57 - 104
Flute Length (mm)	16 - 38
Shank (mm)	6 - 20

From £43.56 £36.30

View Products

2 Flute X5070 Blue Nanograin Carbide Extended Neck Slot Drill - G8A01 (YG-1)

The YG-1 G8A01 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. These slot drills have an extended/relieved neck and range in diameter from 0.1mm-20mm. The X5070 r...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°)
Long neck for extended reach.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Diameter (mm)	0.1 - 20
Overall Length (mm)	40 - 105
Flute Length (mm)	0.2 - 20
Shank (mm)	4 - 20

From £32.95 £27.46

View Products

4 Flute X5070 Blue Nanograin Carbide Extended Neck End Mill - G8A02 (YG-1)

The YG-1 G8A02 series X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a plain shank. These end mills have an extended/relieved neck and range in diameter from 1mm-20mm. The X5070 range...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°)
Long neck for extended reach.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Diameter (mm)	1 - 20
Overall Length (mm)	50 - 105
Flute Length (mm)	1.5 - 20
Shank (mm)	6 - 20

From £43.92 £36.60

View Products

6-8 Flute X5070 Blue Nanograin Carbide 45 Degree Helix Standard Length End Mill - G8D63 (YG-1)

The YG-1 G8D63 series X5070 Blue ultrafine micrograin carbide cutter has 6 flutes and a plain shank. These long length 45° helix angle end mills offer exceptional surface finish, feed rates and tool ...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
45 degree Helix Angle.
Designed for high abrasion resistance thanks to negative rake angle.
Can be used for trochoidal machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 104
Flute Length (mm)	13 - 44
Shank (mm)	6 - 25

From £53.11 £44.26

View Products

4 Flute X5070 Blue Nanograin Carbide Short Length With Extended Neck Short Length Corner Radius End Mill - G8A37 (YG-1)

The YG-1 G8A37 series short length X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a plain shank. These end mills have an extended/relieved neck and corner radius. They range in diamet...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Diameter (mm)	1 - 20
Overall Length (mm)	40 - 100
Flute Length (mm)	1.5 - 24
Shank (mm)	3 - 20

From £32.29 £26.91

View Products

4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Plain Shank End Mill - GMF52/GMF56 (YG-1)

GMF52/GMF56 series CHAMFER EDGE PREP end mills are available from 3-20mm diameter with a plain shank. The V7 plus range from YG-1 offer the highest metal removal rates and silent machining of steels,...

Y1200 coated ultrafine micrograin carbide
HPC (High performance cutting)
Multiple helix geometries and unequal flute spacing enable higher feed rates and larger cut��depths
Helix & unequal flute spacing reduces vibration
High heat resistance of Y1200 coating ensures exceptional tool life in stainless steel, titanium and HRSA machining
Chamfer corner protection to prevent against tool chipping

Diameter (mm)	3 - 25
Overall Length (mm)	54 - 104
Flute Length (mm)	7 - 38
Shank (mm)	6 - 25

From £20.26 £16.88

View Products

4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Plain Shank End Mill - GMF60 (YG-1)

GMF60 series chamfer edge prep end mills are available from 3-20mm diameter with a plain shank. The neck of the cutter is reduced in diameter to prevent interference with the workpiece. The V7 plus r...

Y1200 coated ultrafine micrograin carbide
HPC (High performance cutting)
Multiple helix geometries and unequal flute spacing enable higher feed rates and larger cut��depths
Helix & unequal flute spacing reduces vibration
High heat resistance of Y1200 coating ensures exceptional tool life in stainless steel, titanium and HRSA machining
Chamfer corner protection to prevent against tool chipping

Diameter (mm)	3 - 20
Overall Length (mm)	54 - 164
Flute Length (mm)	7 - 38
Shank (mm)	6 - 20

From £21.16 £17.63

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

Cutwel