Ball Nose Milling Cutters | Cutwel - Milling Tool Specialist

2 Flute Ball Nose Uncoated Premium Superhard HSS Slot Drill - ESH535 (YG-1)

2 Flute Ball Nose Uncoated Premium Superhard HSS Slot Drill - ESH535 (YG-1)

The YG-1 ESH535 series Premium HSS Milling Cutter has 2 flutes and a weldon shank. These slot drills range in diameter from 2-25mm and these have a ball nose radius on the end. The Premium HSS Substra...

Super Hardened Premium HSS substrate gives great performance in general machining.
Exceptional value and tool life.
Available with a weldon shank.
Ball Nose end profile to produce radii on components.
Wide range of geomotries and sizes available for a variety of milling applications.
Available either uncoated, TiALN coated or K2 coated with a HSS 8% cobalt substrate.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Size

Diameter (mm)	2 - 25
Overall Length (mm)	48 - 102
Flute Length (mm)	4 - 26
Shank (mm)	6 - 25

From £11.14 £9.28

View Products

2 Flute Ball Nose TiAlN Coated Premium Superhard HSS Slot Drill - EHC535 (YG-1)

2 Flute Ball Nose TiAlN Coated Premium Superhard HSS Slot Drill - EHC535 (YG-1)

The YG-1 EHC535 series Premium HSS Milling Cutter has 2 flutes and a weldon shank. These slot drills range in diameter from 2-25mm and these have a ball nose radius on the end. The TiALN coated Super...

Super Hardened Premium HSS substrate gives great performance in general machining.
Exceptional value and tool life.
Available with a weldon shank.
Ball Nose end profile to produce radii on components.
Wide range of geomotries and sizes available for a variety of milling applications.
Available either uncoated, TiALN coated or K2 coated with a HSS 8% cobalt substrate.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Size

Diameter (mm)	2 - 25
Overall Length (mm)	48 - 102
Flute Length (mm)	4 - 26
Shank (mm)	6 - 25

From £14.32 £11.93

View Products

2 Flute Ball Nose Uncoated HSS 8 Percent Cobalt HSS Long Length Slot Drill - E2492 (YG-1)

2 Flute Ball Nose Uncoated HSS 8 Percent Cobalt HSS Long Length Slot Drill - E2492 (YG-1)

The YG-1 E2492 series HSS Milling Cutter has 2 flutes and a weldon shank. These ball nose slot drills range in diameter from 2-30mm. The HSS 8% Cobalt Substrate provides exceptional value and tool lif...

Exceptional value and tool life.
Available with a weldon shank.
Ball Nose end profile to produce radii on components.
Wide range of geomotries and sizes available for a variety of milling applications.
HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

Size

Diameter (mm)	2 - 30
Overall Length (mm)	54 - 166
Flute Length (mm)	7 - 45
Shank (mm)	6 - 25

From £18.56 £15.47

View Products

2 Flute 4G Mill Carbide Ball Nose Slot Drill - SEMD98 (YG-1)

2 Flute 4G Mill Carbide Ball Nose Slot Drill - SEMD98 (YG-1)

The SEME98 series range from 1-20mm diameter. These slot drills come with 2 flutes and a plain shank. The 4G Mill range from YG-1 have excellent performance for either dry or wet cutting of all steels...

Excellent performance dry or wet cutting all steels, stainless steel, cast iron & hardened steels-Under HRc55)
YG-1's Y1200 coating & premium micrograin carbide substrate
HSC - High speed cutting
Due to new coating and tool geometry, 4G Mills can machine up to 1200°C with outstanding wear resistance
Due to it's unique ball nose geometry and cutting edges, exceptional surface can be achieved)

Size

Diameter (mm)	0.1 - 40
Overall Length (mm)	40 - 200
Flute Length (mm)	0.1 - 50
Shank (mm)	3 - 25

From £37.74 £31.45

View Products

2 Flute Ball Nose 4G Mill Nanograin Coated Carbide Long Neck Slot Drill - SEM846 (YG-1)

2 Flute Ball Nose 4G Mill Nanograin Coated Carbide Long Neck Slot Drill - SEM846 (YG-1)

The SEME846 ball nose series has a long neck design, ideal for applications where clearance is required to prevent interference from the shank. It is available in diameters ranging from 0.1-12mm with ...

Excellent performance dry or wet cutting all steels, stainless steel, cast iron & hardened steels-Under HRc55)
YG-1's Y1200 coating & premium micrograin carbide substrate
HSC - High speed cutting
Due to new coating and tool geometry, 4G Mills can machine up to 1200°C with outstanding wear resistance
Due to it's unique ball nose geometry and cutting edges, exceptional surface can be achieved)
Available with various reach lengths and overall lengths

Size

Diameter (mm)	0.1 - 3
Overall Length (mm)	40 - 110
Flute Length (mm)	0.1 - 3
Shank (mm)	4 - 6

From £33.86 £28.22

View Products

2 Flute Only One HSS Powder Metal Ball Nose Slot Drill - GYF97 (YG-1)

2 Flute Only One HSS Powder Metal Ball Nose Slot Drill - GYF97 (YG-1)

The YG-1 GYF97 series Only One PM60 Powder Metal Cutter has 2 flutes and a weldon shank. These slot drills range in diameter from 1mm-25mm and have a ball nosed end. They provide excellent performance...

ASP60 Powder Metal substrate gives similar cutting performance and wear resistance to general carbide cutters.
YG-1's own high performance 'Y1200' coating allows for machining up to 1200°C.
The most cost effective milling cutters from YG-1 in unstable machining conditions.
Exceptional tool life and performance on CNC, NC and conventional milling machines in general machining.
Wide range of geometries including chamfer preps, coarse & fine pitch roughers and multiple helix.
Available on weldon shanks.
Excellent performance in roughing applications.
The perfect replacement to coated carbide where problems such as tool chipping occurs.

Size

Diameter (mm)	1 - 25
Overall Length (mm)	47 - 102
Flute Length (mm)	2.5 - 26
Shank (mm)	6 - 25

From £16.68 £13.90

View Products

2 Flute X5070 Blue Nanograin Carbide Ball Nose Standard Length Slot Drill - G8A28 (YG-1)

2 Flute X5070 Blue Nanograin Carbide Ball Nose Standard Length Slot Drill - G8A28 (YG-1)

The YG-1 G8A28 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. These slot drills have a ball nosed end for high precision 3D machining. They range in diameter fro...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Designed for high precision milling operations.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.1 - 12
Overall Length (mm)	40 - 100
Flute Length (mm)	0.2 - 15
Shank (mm)	4 - 12

From £48.58 £40.48

View Products

2 Flute X5070 Blue Nanograin Carbide Stub Length Ball Nose Slot Drill - G8A38 (YG-1)

2 Flute X5070 Blue Nanograin Carbide Stub Length Ball Nose Slot Drill - G8A38 (YG-1)

The YG-1 G8A38 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. These slot drills have a ball nosed end for high precision 3D machining. They range in diameter fro...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Designed for high precision milling operations.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	1 - 25
Overall Length (mm)	50 - 180
Flute Length (mm)	1 - 25
Shank (mm)	4 - 25

From £55.50 £46.25

View Products

2 Flute X5070 Blue Nanograin Carbide Minature Ball Nose Slot Drill - G8A53 (YG-1)

2 Flute X5070 Blue Nanograin Carbide Minature Ball Nose Slot Drill - G8A53 (YG-1)

The YG-1 G8A53 series miniature X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. The ball nosed slot drills are ideal for ultra-high precision machining. They range in d...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.4 - 2
Overall Length (mm)	50 - 50
Flute Length (mm)	0.4 - 2
Shank (mm)	6 - 6

From £45.38 £37.82

View Products

2 Flute X5070 Blue Nanograin Carbide Long Neck Ball Nose Slot Drill - G8A46 (YG-1)

2 Flute X5070 Blue Nanograin Carbide Long Neck Ball Nose Slot Drill - G8A46 (YG-1)

The YG-1 G8A46 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes, a long neck and a ball nose geometry for 3D machining applications. They range in diameter from 0.1mm-4mm and the lon...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.2 - 4
Overall Length (mm)	45 - 100
Flute Length (mm)	0.2 - 3.2
Shank (mm)	4 - 6

From £42.86 £35.72

View Products

2 Flute X5070 Blue Nanograin Carbide Long Neck Ball Nose Slot Drill - G8A54 (YG-1)

2 Flute X5070 Blue Nanograin Carbide Long Neck Ball Nose Slot Drill - G8A54 (YG-1)

The YG-1 G8A54 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes, a long neck and a ball nose geometry for 3D machining applications. They range in diameter from 0.5mm-2mm and the lon...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.5 - 2
Overall Length (mm)	50 - 60
Flute Length (mm)	0.5 - 2
Shank (mm)	4 - 6

From £53.86 £44.88

View Products

3 Flute X5070 Blue Nanograin Carbide Ball Nose End Mill - G8A59 (YG-1)

3 Flute X5070 Blue Nanograin Carbide Ball Nose End Mill - G8A59 (YG-1)

The YG-1 G8D59 series X5070 Blue ultrafine micrograin carbide cutter has 3 flutes and a ball nose geometry for 3D machining applications. They range in diameter from 3mm-20mm. The X5070 range is desig...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 160
Flute Length (mm)	8 - 38
Shank (mm)	6 - 20

From £63.67 £53.06

View Products

4 Flute X5070 Blue Nanograin Carbide Centre Match Ball Nose End Mill - G8D62 (YG-1)

4 Flute X5070 Blue Nanograin Carbide Centre Match Ball Nose End Mill - G8D62 (YG-1)

The YG-1 G8D62 series X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a special centre match ball nose geometry for the highest cutting performance in 3D machining applications. They r...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High wear resistance and high performance.
Exceptional surface roughness.
Centre match geometry is designed for the highest performance cutting, untra-high quality surface roughness, high accuracy machining & extreme tool life.
This tool is able to machine with ultra low cut depth and exceptionally high feed rates.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 160
Flute Length (mm)	8 - 38
Shank (mm)	6 - 20

From £63.67 £53.06

View Products

2 Flute X-Power Pro Carbide Ball Nose Short Length Slot Drill - GM876 (YG-1)

The YG-1 GM876 series ranges from 1-16mm diameter and has an advanced ‘Z Coating’ with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced ‘Z Coating’ developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Size

Diameter (mm)	1 - 16
Overall Length (mm)	38 - 82
Flute Length (mm)	3 - 16
Shank (mm)	3 - 16

From £31.67 £26.39

View Products

2 Flute X-Power Pro Carbide Ball Nose Long Length Slot Drill - GM813 (YG-1)

The YG-1 GM813 series ranges from 1-20mm diameter and has an advanced ‘Z Coating’ with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced ‘Z Coating’ developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Size

Diameter (mm)	1 - 20
Overall Length (mm)	50 - 160
Flute Length (mm)	2.5 - 38
Shank (mm)	4 - 20

From £32.59 £27.16

View Products

2 Flute X-Power Pro Carbide Ball Nose Long Neck Slot Drill - GM886 (YG-1)

The YG-1 GM886 series ranges from 0.5-6mm diameter and has an advanced ‘Z Coating’ with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitabl...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced ‘Z Coating’ developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Size

Diameter (mm)	0.5 - 6
Overall Length (mm)	45 - 90
Flute Length (mm)	0.7 - 9
Shank (mm)	4 - 6

From £36.46 £30.38

View Products

2 Flute X-Power Pro Carbide Ball Nose Taper Neck Slot Drill - GM902 (YG-1)

The YG-1 GM902 series ranges from 1-8mm diameter and has an advanced ‘Z Coating’ with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable ...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced ‘Z Coating’ developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Size

Diameter (mm)	1 - 8
Overall Length (mm)	60 - 120
Flute Length (mm)	2 - 14
Shank (mm)	6 - 10

From £41.10 £34.25

View Products

4 Flute X-Power Pro Carbide Ball Nose Long Length End Mill - GM815 (YG-1)

The YG-1 GM815 series ranges from 2-16mm diameter and has an advanced ‘Z Coating’ with an ultrafine micrograin carbide substrate for exceptional tool life. X-Power Pro milling cutters are suitable...

Exceptional performance in high speed milling of steels, hardened steels up to 55 Rockwell, stainless steel and cast iron
Wet or dry cutting
Advanced ‘Z Coating’ developed by YG-1 with ultrafine micrograin carbide for exceptional tool life
Suitable for high precision machining
Ideal for mould and die, valves, pumps, tool making, automotive and defence industry
Compared to the original X-Power range, the X-Power pro offers improved tool life by 20-30%, increased cutting speed by over 20% and improved surface finish

Size

Diameter (mm)	2 - 16
Overall Length (mm)	50 - 140
Flute Length (mm)	5 - 30
Shank (mm)	6 - 16

From £42.85 £35.71

View Products

2 Flute Lapped Alu-Power Carbide Ball Nose Slot Drill - E5D80 (YG-1)

2 Flute Lapped Alu-Power Carbide Ball Nose Slot Drill - E5D80 (YG-1)

The E5D80 series carbide Alu-Power cutters from YG-1 range from 0.5-12mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Ball nosed geometry.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	0.5 - 12
Overall Length (mm)	40 - 110
Flute Length (mm)	1 - 22
Shank (mm)	3 - 12

From £15.46 £12.88

View Products

2 Flute Lapped Alu-Power Carbide Ball Nose Long Neck Slot Drill - E5E90 (YG-1)

2 Flute Lapped Alu-Power Carbide Ball Nose Long Neck Slot Drill - E5E90 (YG-1)

The E5E90 series carbide Alu-Power cutters from YG-1 range from 0.5-4mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Long neck design for deep pocket machining.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	0.5 - 4
Overall Length (mm)	45 - 110
Flute Length (mm)	1 - 8
Shank (mm)	4 - 6

From £18.32 £15.27

View Products

2 Flute Lapped Alu-Power Carbide Ball Nose Reduced Neck Slot Drill - E5910 (YG-1)

2 Flute Lapped Alu-Power Carbide Ball Nose Reduced Neck Slot Drill - E5910 (YG-1)

The E5910 series carbide Alu-Power cutters from YG-1 range from 6-20mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-F...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Reduced neck for longer reach.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	6 - 20
Overall Length (mm)	55 - 100
Flute Length (mm)	5.5 - 17
Shank (mm)	6 - 20

From £40.27 £33.56

View Products

3 Flute Lapped Alu-Power Carbide Ball Nose Reduced Neck Slot Drill - E5908 (YG-1)

3 Flute Lapped Alu-Power Carbide Ball Nose Reduced Neck Slot Drill - E5908 (YG-1)

The E5908 series carbide Alu-Power cutters from YG-1 range from 2-16mm in diameter. These 3 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-F...

Suitable for high speed machining of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.

Deep flute pockets prevent swarf clogging up the tool.

Increased tool life and higher cutting accuracy.

Micrograin Carbide Substrate.

Sharp cutting edges with mirror finish machining.

Ultra-high metal removal rates possible with WAVE-CUT.

Size

Diameter (mm)	2 - 16
Overall Length (mm)	60 - 100
Flute Length (mm)	3 - 24
Shank (mm)	6 - 16

From £36.62 £30.52

View Products

2 Flute Lapped 25 Degree Helix Carbide Ball Nose A+ Aluminium End Mill - APBE (Korloy)

The Korloy APRE series A+ mirror finish aluminum cutter has 2 flutes, a plain shank and a ball nosed end. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide subst...

Suitable for high speed roughing of aluminium and other non-ferrous materials.

Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium..

Deep flute pockets prevent swarf clogging up the tool.

High rigidity on the cutting edge ensures high productivity.

Ball Nosed geometry.

Micrograin Carbide Substrate.

Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)	1 - 12
Overall Length (mm)	50 - 75
Flute Length (mm)	2 - 24
Shank (mm)	4 - 12

From £31.19 £25.99

View Products

2 Flute PCD Diamond Extreme Hardness Ball Nose End Mill - 30.6522 (Karnasch)

The 30.6522 series from Karnasch is an extreme hardness PCD Diamond ball nose End Mill ranging from 3-12mm diameter. The special PCD EXTREME has a higher hardness than standard PCD and is laser ground...

For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.
PCD EXTREME diamond coated carbide.
PCD Extreme is a premium grade of PCD developed by Karnasch offering 80% more hardness than standard PCD. Laser ground, high performance and fantastic tool life compared to standard PCD.
Ball nosed geometry.
Ultra-sharp cutting edge from laser grinding process ensures the sharpest cutting edge and prevents delamination.

Size

Diameter (mm)	3 - 12
Overall Length (mm)	75 - 105
Flute Length (mm)	2.5 - 10
Shank (mm)	6 - 12

From £204.48 £170.40

View Products

2 Flute CVD Diamond Reduced Neck Ball Nose End Mill - 29.6522 (Karnasch)

The 29.6522 series from Karnasch is a CVD Diamond reduced neck ball nose end mill which ranges from 2-12mm diameter. CVD (99.9% diamond) have 4-5 times the tool life comapred to PCD and are ideal for ...

For Carbon Fibre, Glass Reinforced Plastics, Aluminium, Copper & Brass.

0.1mm chamfer edge preparation protects the cutting edge.

CVD Diamond is the ultimate composite milling tool, twice as hard as PCD and can only be ground by laser. For the most abrasive composites or when the longest tool life is required.

Ball nosed gemoetry.

4-5 times tool life compared to PCD.

CVD 99.9% Diamond.

Ultra-sharp cutting edge from laser grinding process ensures the sharpest cutting edge and prevents delamination.

Size

Diameter (mm)	2 - 12
Overall Length (mm)	50 - 105
Flute Length (mm)	2.5 - 9
Shank (mm)	4 - 12

From £264.38 £220.32

View Products