Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Dial Test Indicators

Dial Test Indicators

Dial test indicators are used to measure concentricity, alignment, parallelism & flatness. High accuracy indicating from Insize and market leaders Mitutoyo with various shapes and styles available.

Read More
Filter By arrow
carrat-down

31 Items

Sort By
carrat-down
sort-descending

The Moore & Wright MW-420 Series Dial Test Indicator has carbide points, a rotating dial and two dovetail clamps....

  • Standard: ANSI B89.1.10, DIN2270
  • Rotating dial
  • Two dovetail clamps
  • Dial diameter: 37mm
  • Carbide points
  • Styli length: 12mm / 1/2”, M1.4 thread
  • Automatic reversal of measuring direction

From £60.00 £50.00

The Baty HL series of lever-type dial test indicators are top quality, Swiss-made precision instruments. Suitable for universal applications, they are supplied with a 2mm diameter contact point – fi...

  • High sensitivity, repeatability and accuracy
  • Meet or exceed BS, DIN, Federal and other national standards
  • Anti-magnetic
  • Automatic reverse action stylus – hand always rotates clockwise
  • Adjustable bezel for zeroing
  • Rugged, satin chrome finished body
  • Three dovetail mountings, top, back and front
  • Fully jewelled and geared movement
  • Precision ball bearing mounted,interchangeable carbide point swivels through 240º
  • Suitable for universal applications in the workshop and inspection departments
  • Supplied in a tough plastic case

From £147.60 £123.00

The Baty HL series of lever-type dial test indicators are top quality, Swiss-made precision instruments. Suitable for universal applications, they are supplied with a 2mm diameter contact point – fi...

  • High sensitivity, repeatability and accuracy
  • Meet or exceed BS, DIN, Federal and other national standards
  • Anti-magnetic
  • Automatic reverse action stylus – hand always rotates clockwise
  • Adjustable bezel for zeroing
  • Rugged, satin chrome finished body
  • Three dovetail mountings, top, back and front
  • Fully jewelled and geared movement
  • Precision ball bearing mounted,interchangeable carbide point swivels through 240º
  • Suitable for universal applications in the workshop and inspection departments
  • Supplied in a tough plastic case

From £144.60 £120.50

The 2380/1 Dial Test Indicator for accurate measurements of surface distortion or run out. Comes complete with carbide contact point, two way measuring direction and dovetail clamping plus 2 extra cl...

  • Carbide contact point.
  • 2 measuring directions.
  • Anti magnetic body.
  • Supplied with 2 clamps.

From £56.20 £46.83

The 2383 Dial Test Indicator with long styli for accurate measurements of surface distortion or run out. Comes complete with carbide contact point, two way measuring direction and dovetail clamping p...

  • Graduation 0.01mm.
  • Carbide contact point.
  • Jeweled bearing.
  • 2 measuring directions.
  • Anti magnetic body.
  • Supplied with 2 clamps.

From £120.44 £100.37

The 2480 Back Plunger Dial Test Indicator for large range measurements of surface distortion or run out. Comes complete with carbide contact point, two way measuring direction and dovetail clamping p...

  • Graduation 0.01mm.
  • Carbide contact point.
  • Jeweled bearing.
  • 2 measuring directions.
  • Anti magnetic body.
  • Supplied with 2 clamps.

From £166.14 £138.45

The 2399 Tilted Face Dial Test Indicator for accurate measurements of surface distortion or run out. Comes complete with carbide contact point, two way measuring direction and dovetail clamping plus ...

  • Graduation 0.01mm.
  • Carbide contact point.
  • Jeweled bearing.
  • 2 measuring directions.
  • Anti magnetic body.
  • Supplied with 2 clamps.

From £88.26 £73.55

The 2398 Back Plunger Dial Test Indicator for accurate measurements of surface distortion or run out. Comes complete with carbide contact point, two way measuring direction and dovetail clamping plus...

  • Graduation 0.01mm.
  • Carbide contact point.
  • Jeweled bearing.
  • 2 measuring directions.
  • Anti magnetic body.
  • Supplied with 2 clamps.

From £88.26 £73.55

The 2386 Large Range Dial Test Indicator for measurements of surface distortion or run out. Comes complete with carbide contact point, two way measuring direction and dovetail clamping plus 2 extra c...

  • Carbide contact point.
  • Jeweled bearing.
  • 2 measuring directions.
  • Anti magnetic body.
  • Supplied with 2 clamps.

From £142.98 £119.15

The Martest Dial Test Indicator is for high precision measurements. It is for measuring deviations in concentricity, axial run-out, parallelism and flatness. For centring shafts, boreholes and alignin...

  • High-contrast dial face, sealed with O-ring
  • Mineral glass viewing panel for best protection against cracking, scratching, hot shavings and optimal resistance to solvents
  • Matt chrome plated protective casing with three integrated dovetail guide rails
  • Shockproof measuring mechanism
  • Anti-magnetic model
  • Automatic adjustment to the contacting direction ensures infallible readings
  • Ball bearing mounted double lever
  • Friction clutch overload protection
  • Stylus with carbide ball

From £112.86 £94.05

The 513 series Mitutoyo Dial Test Indicator provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators and is resistant to water and dust thanks to the one piec...

  • Provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators.
  • Resistant to water and dust thanks to the one piece bezel and O-ring seal for the crystal.
  • No-clutch structure for automatic reversal of measuring direction.
  • High sensitivity and quick response due to low-friction jewelled bearings
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £144.50 £120.42

The Mitutoyo vertical face Indicator (513 series) is useful for centering holes under a machine tool spindle using the universal holder mounted in the spindle chuck. It has a measuring force of 0.3N o...

  • The vertical face indicator is useful for centering holes under a machine tool spindle using the universal holder mounted in the spindle chuck.
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £104.81 £87.34

The Mitutoyo vertical face Indicator (513 series) is useful for centering holes under a machine tool spindle using the universal holder mounted in the spindle chuck. It has a measuring force of 0.3N o...

  • The vertical face indicator is useful for centering holes under a machine tool spindle using the universal holder mounted in the spindle chuck.
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £122.11 £101.76

Dial Indicator Tester (170 series). Accepts ø6 mm, ø8 mm indicator stems. Made by Mitutoyo....

  • Series 170 – UDT-2 Dial Indicator Tester
  • UDT-2 is an accuracy tester for 0.01 mm resolution dial indicators, dial test indicators and bore gauges
  • Accepts ø6 mm, ø8 mm, 1/4" and 3/8" indicator stems
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £1,920.72 £1,600.60

The 513 series Mitutoyo Dial Test Indicator provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators and is resistant to water and dust thanks to the one piec...

  • Provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators.
  • Resistant to water and dust thanks to the one piece bezel and O-ring seal for the crystal.
  • No-clutch structure for automatic reversal of measuring direction.
  • High sensitivity and quick response due to low-friction jewelled bearings
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £177.06 £147.55

The Mitutoyo vertical face Indicator (513 series) is useful for centering holes under a machine tool spindle using the universal holder mounted in the spindle chuck. It has a measuring force of 0.3N o...

  • The vertical face indicator is useful for centering holes under a machine tool spindle using the universal holder mounted in the spindle chuck.
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £157.73 £131.44

The Mitutoyo parallel face Indicator (513 series) is convenient to use when the application calls for stylus movement in a plane parallel to that of the dial face. It has a measuring force of 0.3N or...

  • The vertical face indicator is useful for centering holes under a machine tool spindle using the universal holder mounted in the spindle chuck.
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £112.96 £94.13

Pocket Dial Test Indicator (513 series). Indicator can be mounted by clamping the stem or the body. Jewelled bearings assure higher sensitivity and accuracy. There is an adjustable bezel/dial face and...

  • Jewelled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body
  • Reversible measuring direction
  • Stylus is adjustable within 220°.
  • Fully adjustable bezel/dial face.
  • Bezel is sealed with on O-ring to keep out water and oil.
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £135.34 £112.78

The 513 series Mitutoyo Dial Test Indicator provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators and is resistant to water and dust thanks to the one piec...

  • Measuring force is 0.3N or less.
  • Graduation: 0.01mm.
  • High sensitivity.
  • Made by Mitutoyo - Market leader in the engineering measuring tool sector.

From £94.28 £78.57

The Insize 2318 Series Dial Indicator is supplied with limit pointers and bezel clamp. It has a graduation of 0.1mm and a dial reading of 1-10....

  • Supplied with limit pointers and bezel clamp.
  • 1-10 Dial reading.
  • 0.1mm graduation.

From £43.61 £36.34

The 513 series Mitutoyo Dial Test Indicator provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators and is resistant to water and dust thanks to the one piec...

  • Provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators.
  • Resistant to water and dust thanks to the one piece bezel and O-ring seal for the crystal.
  • No-clutch structure for automatic reversal of measuring direction.
  • High sensitivity and quick response due to low-friction jewelled bearings
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £139.42 £116.18

The 513 series Mitutoyo Dial Test Indicator provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators and is resistant to water and dust thanks to the one piec...

  • Provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators.
  • Resistant to water and dust thanks to the one piece bezel and O-ring seal for the crystal.
  • No-clutch structure for automatic reversal of measuring direction.
  • High sensitivity and quick response due to low-friction jewelled bearings
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £177.06 £147.55

The 513 series Mitutoyo Dial Test Indicator provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators and is resistant to water and dust thanks to the one piec...

  • Provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators.
  • Resistant to water and dust thanks to the one piece bezel and O-ring seal for the crystal.
  • No-clutch structure for automatic reversal of measuring direction.
  • High sensitivity and quick response due to low-friction jewelled bearings
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £109.90 £91.58

The 513 series Mitutoyo Dial Test Indicator provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators and is resistant to water and dust thanks to the one piec...

  • Provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators.
  • Resistant to water and dust thanks to the one piece bezel and O-ring seal for the crystal.
  • No-clutch structure for automatic reversal of measuring direction.
  • High sensitivity and quick response due to low-friction jewelled bearings
  • Made by Mitutoyo- Market leader in the engineering measuring tool sector.

From £176.04 £146.70

Dial Test Indicators from Insize & Mahr. Used for accurate measurements of concentricity, alignment, parallelism and flatness.