Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
Or
Checkout as a Guest
Place your order without creating an account for extra convenience.
Free Next Day Delivery
on orders over £59 ex vat*
Expert Technical Team
Get advice on 01924 869 615
Same Day Despatch
On orders placed up to 5.45pm
MAIN STYLE TAGS
MOBILE VIEW HTML
V7 Plus 6 Flute HPC Milling Cutters
Ultra high feed TRP series & ultra deep cut Chip Splitter series
Revolutionary 6 flute design for phenomenal performance and outstanding surface finish.
★★★★★
P
M
S
K
Specification
 |
V7 Plus 6 Flute TRP Range |
V7 Plus 6 Flute TRP Chip Splitter Range |
|---|---|---|
| Diameter Range (mm) | 6-25 | 6-25 |
| Metal Removal Rates | ★★★★★ | ★★★★☆ |
| Depth Of Cut | ★★★★☆ | ★★★★★ |
| Chip Control | ★★★★☆ | ★★★★★ |
| Material Versatility | ★★★★★ | ★★★★★ |
| Cutting Resistance | ★★★★★ | ★★★★★ |
| Surface Finish | ★★★★★ | ★★★★☆ |
| High Accuracy Machining | ★★★★☆ | ★★★★☆ |
*Conservative example cutting data given. Tools can be run faster or slower depending on machine capability. Data based on ENMX06 insert.
Advantages
Hyper Metal Removal
The fastest metal removal rates, even in deep slots or profiling up to 2xD (TRP Range)
Up to 4xD Depth of Cut
Unique chip splitter geometry produces short chips to allow up to 4xD cut depths (TRP Chip Splitter Range)
Rough & Finish
Can be used for both finishing or high feed roughing across a range of materials
High Heat Dissipation
Y1200 coating combined with unique geometry prolongs tool life
Features
TRP Geometry
Reduces vibration, increases accuracy and improves tool life
Dynamic Milling
Excellent for high speed and trochoidal milling
Heat Resistant Coating
Special Y1200 high heat resistance coating up to 1,200°C
Ultrafine Carbide
High performance premium ultrafine micrograin carbide
Built to Handle High Speed
Cutting Without Buildup
-
Excels in Ultra High-Speed, High HP Applications Up to 35,000 RPM
-
Rigid Design for Excellent Ramping
-
Rigid Design for Excellent Ramping
The Anatomy of Efficiency
1
Specialised Design of Corner Gash
▪
Unique flute design and superior corner protection
▪
Tool life protected against catastrophic failure in high feed application
▪
Polished flutes for excellent chip flow
2
DLC Diamond-Like Carbon Coating
▪
Excels in hard aluminium & high speeds
▪
Provides edge strength and unsurpassed tool life
1
Specialised Design of Corner Gash
Unique flute design and superior corner protection
Tool life protected against catastrophic failure in high feed application
Polished flutes for excellent chip flow
2
DLC Diamond-Like Carbon Coating
Excels in hard aluminium & high speeds
Provides edge strength and unsurpassed tool life
Cylindrical Land
Increased performance in a variety of cutting conditions with reduced vibration
Symmetrical Shape
Highly effective in vertical ramping up to 20 degrees and step-over plunging applications
Unique Flute Design
Effective chip evacuation at high feed rates with lower cutting forces
Speed. Strength. Sharpness.
Alu-Power HPC keeps its edge under tough conditions.
No Cutter Withstands Extreme Radial Forces
Better or Longer
1
Wide Clamping Area
2
6 Cornered Insert
High cost efficiency from multi-corners
1
Streamlined Holder Design
Improved chip evacuation in deep shouldering and slotting
2
Through Coolant System
Improved chip flow and tool life thanks to insert cooling
3
3-Side Supporting System
Stable tool life
4
Strong Clamping Screws
Enable rigid clamping
The Benefits of Balanced Cutting
1
Wide Clamping Area
2
6 Cornered Insert
High cost efficiency from multi-corners
1
Streamlined Holder Design
Improved chip evacuation in deep shouldering and slotting
2
Through Coolant System
Improved chip flow and tool life thanks to insert cooling
3
3-Side Supporting System
Stable tool life
4
Strong Clamping Screws
Enable rigid clamping
Application
Material Suitability
| Material | Excellent | Good |
|---|---|---|
|
P
Steel
|
• | • |
|
H
Hardened Steel
|
• | • |
|
M
Stainless Steel
|
• | • |
|
S
HRSA's
|
• | • |
|
K
Cast Iron
|
• | • |
|
N
Aluminium & Non-Ferrous
|
• | • |
Possible Machining Methods
Face Milling
Shoulder Milling
Trochoidal Milling
Circular Interpolation
V7 Plus 6 Flute TRP Chip Splitter Range
Example Cutting Data
 The V7 PLUS 6 flute range can be used for finishing applications or for high metal removal using trochoidal milling methods. Either process offers high feed rates and low cutting load.Â
| Ø12mm, 6 Flute GMG18120 Side Cutting - Low Carbon Steel HRC20 |
Ø12mm, 6 Flute GMG18120 Side Cutting - Stainless Steel 316 |
Ø12mm, 6 Flute Chip Splitter GMH56120 Side Cutting - Titanium |
Ø12mm, 6 Flute Chip Splitter GMH56120 Side Cutting - Stainless Steel (316) |
|
|---|---|---|---|---|
| RPM | 7,957 | 3,899 | 2,652 | 3,500 |
| Feed (mm/min) | 8,270 | 2,457 | 668 | 1,113 |
| Vc (m/min) | 300 | 147 | 100 | 132 |
| Fz (mm/tooth) | 0.173 | 0.105 | 0.042 | 0.053 |
| Depth of Cut (AP) | 24 | 24 | 45 | 45 |
| Depth of Cut (AE) | 0.4 | 0.4 | 0.5 | 0.5 |