X5070 Blue Milling Cutters - View All | Cutwel

2 Flute X5070 Blue Nanograin Carbide Long Neck Miniature Slot Drill - G8A45 (YG-1)

The YG-1 G8A45 series miniature X5070 Blue ultrafine micrograin carbide cutter has 2 flutes, a plain shank and long neck for deep pocket milling. They range in diameter from 0.1mm-4mm. The X5070 range...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°)
Long neck for extended reach.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.1 - 4
Overall Length (mm)	45 - 100
Flute Length (mm)	0.15 - 6
Shank (mm)	4 - 6

From £35.11 £29.26

View Products

2 Flute X5070 Blue Nanograin Carbide Extended Neck Slot Drill - G8A01 (YG-1)

The YG-1 G8A01 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. These slot drills have an extended/relieved neck and range in diameter from 0.1mm-20mm. The X5070 r...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°)
Long neck for extended reach.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.1 - 20
Overall Length (mm)	40 - 105
Flute Length (mm)	0.2 - 20
Shank (mm)	4 - 20

From £35.40 £29.50

View Products

4 Flute X5070 Blue Nanograin Carbide Extended Neck End Mill - G8A02 (YG-1)

The YG-1 G8A02 series X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a plain shank. These end mills have an extended/relieved neck and range in diameter from 1mm-20mm. The X5070 range...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°)
Long neck for extended reach.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	1 - 20
Overall Length (mm)	50 - 105
Flute Length (mm)	1.5 - 20
Shank (mm)	6 - 20

From £47.18 £39.32

View Products

6-8 Flute X5070 Blue Nanograin Carbide 45 Degree Helix Standard Length End Mill - G8D63 (YG-1)

The YG-1 G8D63 series X5070 Blue ultrafine micrograin carbide cutter has 6 flutes and a plain shank. These long length 45° helix angle end mills offer exceptional surface finish, feed rates and tool ...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
45 degree Helix Angle.
Designed for high abrasion resistance thanks to negative rake angle.
Can be used for trochoidal machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 104
Flute Length (mm)	13 - 44
Shank (mm)	6 - 25

From £57.06 £47.55

View Products

6-8 Flute X5070 Blue Nanograin Carbide 45 Degree Helix Long Length End Mill - G8D64 (YG-1)

The YG-1 G8D64 series X5070 Blue ultrafine micrograin carbide cutter has 6 flutes and a plain shank. These long length 45° helix angle end mills offer exceptional surface finish, feed rates and tool ...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
45 degree Helix Angle.
Designed for high abrasion resistance thanks to negative rake angle.
Can be used for trochoidal machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	6 - 25
Overall Length (mm)	70 - 180
Flute Length (mm)	26 - 92
Shank (mm)	6 - 25

From £74.72 £62.27

View Products

2 Flute X5070 Blue Nanograin Carbide Long Neck Corner Radius Slot Drill - G8A60 (YG-1)

The YG-1 G8A60 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes, a plain shank, long neck and corner radius for deep pocket milling. They range in diameter from 0.5mm-12mm. The X5070...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.5 - 12
Overall Length (mm)	45 - 80
Flute Length (mm)	0.7 - 12
Shank (mm)	4 - 12

From £45.41 £37.84

View Products

2 Flute X5070 Blue Nanograin Carbide Minature Long Neck Corner Radius Slot Drill - G8A52 (YG-1)

The YG-1 G8A52 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes, a plain shank, long neck and corner radius for deep pocket milling. They range in diameter from 0.5mm-2mm. The X5070 ...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.5 - 2
Overall Length (mm)	50 - 50
Flute Length (mm)	0.7 - 2.2
Shank (mm)	6 - 6

From £45.41 £37.84

View Products

2 Flute X5070 Blue Nanograin Carbide Extended Neck Corner Radius Slot Drill - G8A36 (YG-1)

The YG-1 G8A36 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. These slot drills have an extended/relieved neck and corner radius. They range in diameter from 0.3...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.3 - 20
Overall Length (mm)	40 - 100
Flute Length (mm)	0.45 - 24
Shank (mm)	3 - 20

From £34.69 £28.91

View Products

4 Flute X5070 Blue Nanograin Carbide High Feed Corner Radius End Mill - G8B59 (YG-1)

The YG-1 G8B59 series X5070 Blue ultrafine micrograin carbide cutter has a special high feed geometry offering unbelievable metal removal rates on prehardened steels, tool steels and high hardened ste...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Designed with reduced clearance angles and short flutes for strength.
High hardness & heat resistance coating for long life in dry applications.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	2 - 12
Overall Length (mm)	50 - 80
Flute Length (mm)	1 - 5
Shank (mm)	6 - 12

From £54.34 £45.28

View Products

4 Flute X5070 Blue Nanograin Carbide High Feed Long Length Corner Radius End Mill - G8B54 (YG-1)

The YG-1 G8B54 series X5070 Blue ultrafine micrograin carbide cutter has a special high feed geometry offering unbelievable metal removal rates on prehardened steels, tool steels and high hardened ste...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Designed with reduced clearance angles and short flutes for strength.
High hardness & heat resistance coating for long life in dry applications.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	2 - 16
Overall Length (mm)	70 - 130
Flute Length (mm)	1 - 6.5
Shank (mm)	6 - 16

From £57.35 £47.79

View Products

4 Flute X5070 Blue Nanograin Carbide Short Length With Extended Neck Short Length Corner Radius End Mill - G8A37 (YG-1)

The YG-1 G8A37 series short length X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a plain shank. These end mills have an extended/relieved neck and corner radius. They range in diamet...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	1 - 20
Overall Length (mm)	40 - 100
Flute Length (mm)	1.5 - 24
Shank (mm)	3 - 20

From £34.69 £28.91

View Products

4 Flute X5070 Blue Nanograin Carbide Standard Length With Extended Neck Corner Radius End Mill - G8A47 (YG-1)

The YG-1 G8A47 series X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a plain shank. These end mills have an extended/relieved neck and corner radius. They range in diameter from 3mm-1...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	3 - 12
Overall Length (mm)	55 - 80
Flute Length (mm)	4 - 12
Shank (mm)	6 - 12

From £50.72 £42.27

View Products

4 Flute X5070 Blue Nanograin Carbide Extended Neck Corner Radius End Mill - G8B08 (YG-1)

The YG-1 G8B08 series X5070 Blue ultrafine micrograin carbide cutter has a 4 flute geometry, extended/relieved neck and corner radius. They offer exceptional performance in finishing and profiling ap...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	6 - 12
Overall Length (mm)	90 - 110
Flute Length (mm)	9 - 18
Shank (mm)	6 - 12

From £59.72 £49.77

View Products

6 Flute X5070 Blue Nanograin Carbide 45 Degree Helix Extended Neck Corner Radius End Mill - G8A39 (YG-1)

The YG-1 G8A39 series X5070 Blue ultrafine micrograin carbide cutter has a 6 flute 45° helix geometry, extended/relieved neck and corner radius. They offer exceptional performance in finishing and p...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Deep slotting is possible by reduced neck.
Corner radius for preventing chipping in high speed machining.
45 degree Helix Angle.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	6 - 20
Overall Length (mm)	50 - 140
Flute Length (mm)	6 - 76
Shank (mm)	6 - 20

From £72.89 £60.74

View Products

2 Flute X5070 Blue Nanograin Carbide Ball Nose Standard Length Slot Drill - G8A28 (YG-1)

The YG-1 G8A28 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. These slot drills have a ball nosed end for high precision 3D machining. They range in diameter fro...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High Speed Roughing & Finishing.
Designed for high precision milling operations.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.1 - 12
Overall Length (mm)	40 - 100
Flute Length (mm)	0.2 - 15
Shank (mm)	4 - 12

From £51.53 £42.94

View Products

2 Flute X5070 Blue Nanograin Carbide Stub Length Ball Nose Slot Drill - G8A38 (YG-1)

The YG-1 G8A38 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. These slot drills have a ball nosed end for high precision 3D machining. They range in diameter fro...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Designed for high precision milling operations.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	1 - 25
Overall Length (mm)	50 - 180
Flute Length (mm)	1 - 25
Shank (mm)	4 - 25

From £58.87 £49.06

View Products

2 Flute X5070 Blue Nanograin Carbide Minature Corner Radius Slot Drill - G8A50 (YG-1)

The YG-1 G8A50 series miniature X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. The corner radius slot drills are ideal for ultra-high precision machining. They range i...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Corner radius for preventing chipping in high speed machining.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.3 - 2
Overall Length (mm)	50 - 50
Flute Length (mm)	0.45 - 2.2
Shank (mm)	6 - 6

From £47.23 £39.36

View Products

2 Flute X5070 Blue Nanograin Carbide Minature Ball Nose Slot Drill - G8A53 (YG-1)

The YG-1 G8A53 series miniature X5070 Blue ultrafine micrograin carbide cutter has 2 flutes and a plain shank. The ball nosed slot drills are ideal for ultra-high precision machining. They range in d...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.4 - 2
Overall Length (mm)	50 - 50
Flute Length (mm)	0.4 - 2
Shank (mm)	6 - 6

From £48.14 £40.12

View Products

2 Flute X5070 Blue Nanograin Carbide Long Neck Ball Nose Slot Drill - G8A46 (YG-1)

The YG-1 G8A46 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes, a long neck and a ball nose geometry for 3D machining applications. They range in diameter from 0.1mm-4mm and the lon...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.2 - 4
Overall Length (mm)	45 - 100
Flute Length (mm)	0.2 - 3.2
Shank (mm)	4 - 6

From £45.47 £37.89

View Products

2 Flute X5070 Blue Nanograin Carbide Long Neck Ball Nose Slot Drill - G8A54 (YG-1)

The YG-1 G8A54 series X5070 Blue ultrafine micrograin carbide cutter has 2 flutes, a long neck and a ball nose geometry for 3D machining applications. They range in diameter from 0.5mm-2mm and the lon...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	0.5 - 2
Overall Length (mm)	50 - 60
Flute Length (mm)	0.5 - 2
Shank (mm)	4 - 6

From £57.13 £47.61

View Products

3 Flute X5070 Blue Nanograin Carbide Ball Nose End Mill - G8A59 (YG-1)

The YG-1 G8D59 series X5070 Blue ultrafine micrograin carbide cutter has 3 flutes and a ball nose geometry for 3D machining applications. They range in diameter from 3mm-20mm. The X5070 range is desig...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
Excellent workplace finish.
Designed for high precision milling operation.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 160
Flute Length (mm)	8 - 38
Shank (mm)	6 - 20

From £67.54 £56.28

View Products

4 Flute X5070 Blue Nanograin Carbide Centre Match Ball Nose End Mill - G8D62 (YG-1)

The YG-1 G8D62 series X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a special centre match ball nose geometry for the highest cutting performance in 3D machining applications. They r...

Nanograin carbide substrate with blue silicone based coating.
Dry machining in steels and hardened steeld < HRc70.
Suitable for machining at extreme cutting speeds.
High abrasion resistance with a mirror surface finish.
Strong negative land provides tool strength for high hardness machining.
Ultimate tool life.
Can cope with extreme heat (up to 1400°).
High wear resistance and high performance.
Exceptional surface roughness.
Centre match geometry is designed for the highest performance cutting, untra-high quality surface roughness, high accuracy machining & extreme tool life.
This tool is able to machine with ultra low cut depth and exceptionally high feed rates.
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).

Size

Diameter (mm)	3 - 20
Overall Length (mm)	60 - 160
Flute Length (mm)	8 - 38
Shank (mm)	6 - 20

From £67.54 £56.28

View Products

Suggestions

Products

Categories

BUY 2 BOXES GET 1 FREE ON TURNING, GROOVING & PARTING INSERTS - VIEW NOW
HURRY... OFFER ENDS TODAY

35% OFF

ON HAND & MACHINE TAP SETS FROM £3.87

OFFER ENDS TOMORROW

X5070 Blue Milling Cutters - View All

Cutwel

Suggestions

Products

Categories

BUY 2 BOXES GET 1 FREE ON TURNING, GROOVING & PARTING INSERTS - VIEW NOWHURRY... OFFER ENDS TODAY

35% OFF

ON HAND & MACHINE TAP SETS FROM £3.87

OFFER ENDS TOMORROW

X5070 Blue Milling Cutters - View All

BUY 2 BOXES GET 1 FREE ON TURNING, GROOVING & PARTING INSERTS - VIEW NOW
HURRY... OFFER ENDS TODAY