• Free Delivery on Orders Over £75 ex vat*
    *View Terms & Conditions

  • The BEST Technical Advice in the Industry
    Call Our Tech Team on 01924 869 615

V7 Plus Milling Cutters

First choice for high performance machining where ultra-high metal removal rates are required in steels <HRc40, stainless steels, heat resistant super alloys and cast iron.

V7 Plus Milling Cutters

First choice for high performance machining where ultra-high metal removal rates are required in steels <HRc40, stainless steels, heat resistant super alloys and cast iron.

1st choice for high performance milling with ultra-high metal removal rates

 

  • Ultra high metal removal in steels up to HRc40, stainless steel, HRSA's and cast iron
  • Unique helix reduces chatter for improved stability & finishing
  • Special flute geometry for optimal chip formation & evacuation
  • Enhanced corner geometry for longer tool life
  • Best performance when used with hydraulic, shrink fit or milling chucks

17 Items

Set Descending Direction
  1. 6 Flute V7 Plus Chip Splitter Coated Carbide Weldon Shank End Mill - GMH57 (YG-1)
    6 Flute V7 Plus Chip Splitter Coated Carbide Weldon Shank End Mill - GMH57 (YG-1)
    The V7 chip splitters are an extension to the YG-1 to the V7 Plus range. They features 6 flutes with special chip splitters on each flute. This improves swarf management in trochoidal and end milling ... read more >
    New 6 flute geometry with special chip splitters on each flute
    Chip splitter improves swarf management in trochoidal and end milling application ... read more >
    • P
    • M
    • S
    • K

    Starting at £25.16 £20.97

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 24 - 100
    • L2 - 75 - 170
    GHM57
  2. 6 Flute V7 Plus Chip Splitter Coated Carbide Plain Shank End Mill -GMH56 (YG-1)
    6 Flute V7 Plus Chip Splitter Coated Carbide Plain Shank End Mill -GMH56 (YG-1)
    The V7 chip splitters are an extension to the YG-1 to the V7 Plus range. They features 6 flutes with special chip splitters on each flute. This improves swarf management in trochoidal and end milling ... read more >
    New 6 flute geometry with special chip splitters on each flute
    Chip splitter improves swarf management in trochoidal and end milling applicatio ... read more >
    • P
    • M
    • S
    • K

    Starting at £25.16 £20.97

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 24 - 100
    • L2 - 75 - 170
    GMH56
  3. 4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF53/GMF57 (YG-1)
    4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF53/GMF57 (YG-1)
    GMF53/GMF57 series CHAMFER EDGE PREP end mills are available from 3-20mm diameter with a Weldon shank. The V7 plus range from YG-1 offer the highest metal removal rates and silent machining of steels ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £19.80 £16.50

    View Products
    • D1 - 3 - 25
    • D2 - 6 - 25
    • L1 - 7 - 38
    • L2 - 54 - 104
    GMF53/GMF57
  4. 4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Plain Shank End Mill - GMF52/GMF56 (YG-1)
    4 Flute V7 Plus Coated Carbide Multiple Helix Chamfer Prep Plain Shank End Mill - GMF52/GMF56 (YG-1)
    GMF52/GMF56 series CHAMFER EDGE PREP end mills are available from 3-20mm diameter with a plain shank. The V7 plus range from YG-1 offer the highest metal removal rates and silent machining of steels, ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £19.80 £16.50

    View Products
    • D1 - 3 - 25
    • D2 - 6 - 25
    • L1 - 7 - 38
    • L2 - 54 - 104
    GMF52/GMF56
  5. 4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Plain Shank End Mill - GMF60 (YG-1)
    4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Plain Shank End Mill - GMF60 (YG-1)
    GMF60 series chamfer edge prep end mills are available from 3-20mm diameter with a plain shank. The neck of the cutter is reduced in diameter to prevent interference with the workpiece. The V7 plus r ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £20.68 £17.23

    View Products
    • D1 - 3 - 20
    • D2 - 6 - 20
    • L1 - 7 - 38
    • L2 - 54 - 164
    GMF60
  6. 4 Flute V7 Plus Coated Carbide Multiple Helix Corner Radius Plain Shank End Mill - GMF54/GMF58 (YG-1)
    4 Flute V7 Plus Coated Carbide Multiple Helix Corner Radius Plain Shank End Mill - GMF54/GMF58 (YG-1)
    GMF54/GMF58 series CORNER RADIUS end mills are available from 3-20mm diameter with a plain shank. The V7 plus range from YG-1 offer the highest metal removal rates and silent machining of steels, sta ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £23.86 £19.88

    View Products
    • D1 - 3 - 25
    • D2 - 6 - 25
    • L1 - 7 - 38
    • L2 - 54 - 104
    GMF54/GMF58
  7. 6 Flute V7 Plus 45 Degree Helix Coated Carbide Plain Shank End Mill / Super Finisher / Trochoidal Mill - GMG12/GMG14 (YG-1)
    6 Flute V7 Plus 45 Degree Helix Coated Carbide Plain Shank End Mill / Super Finisher / Trochoidal Mill - GMG12/GMG14 (YG-1)
    The GMG12/GMG14 series high helix end mills range from 6-25mm diameter. The V7 plus 6 flute 45 degree helix range from YG-1 offer the highest metal removal rates for trochoidal milling or the best per ... read more >

    The unique geometry of the variable pitch reduces chatter for high speed and trochoidal milling
    Y1200 coated ultrafine micrograin carbid ... read more >
    • P
    • M
    • S
    • K

    Starting at £18.41 £15.34

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 13 - 100
    • L2 - 57 - 170
    GMG12/GMG14
  8. 4 Flute V7 Plus Multiple Helix Coated Carbide Ball Nose Plain Shank End Mill - GMG55/GMG56 (YG-1)
    4 Flute V7 Plus Multiple Helix Coated Carbide Ball Nose Plain Shank End Mill - GMG55/GMG56 (YG-1)
    The GMG17/GMG19 series corner radius high helix end mills range from 6-25mm diameter with long flutes. The V7 plus 6 flute 45 degree helix range from YG-1 offer the highest metal removal rates for tro ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £27.24 £22.70

    View Products
    • D1 - 3 - 25
    • D2 - 6 - 25
    • L1 - 8 - 38
    • L2 - 57 - 104
    GMG55/GMG56
  9. 4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF61 (YG-1)
    4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Chamfer Prep Weldon Shank End Mill - GMF61 (YG-1)
    GMF61 series chamfer edge prep end mills are available from 3-20mm diameter with a Weldon shank. The neck of the cutter is reduced in diameter to prevent interference with the workpiece. The V7 plus ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £20.68 £17.23

    View Products
    • D1 - 3 - 20
    • D2 - 6 - 20
    • L1 - 7 - 38
    • L2 - 54 - 164
    GMF61
  10. 4 Flute V7 Plus Coated Carbide Multiple Helix Corner Radius Weldon Shank End Mill - GMF55/GMF59 (YG-1)
    4 Flute V7 Plus Coated Carbide Multiple Helix Corner Radius Weldon Shank End Mill - GMF55/GMF59 (YG-1)
    GMF55/GMF59 series CORNER RADIUS end mills are available from 3-20mm diameter with a Weldon shank. The V7 plus range from YG-1 offer the highest metal removal rates and silent machining of steels, st ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £23.86 £19.88

    View Products
    • D1 - 3 - 25
    • D2 - 6 - 25
    • L1 - 7 - 38
    • L2 - 54 - 104
    GMF55/GMF59
  11. 6 Flute V7 Plus Chip Splitter Coated Carbide Corner Radius Weldon Shank End Mill - GMH58 (YG-1)
    6 Flute V7 Plus Chip Splitter Coated Carbide Corner Radius Weldon Shank End Mill - GMH58 (YG-1)
    The V7 chip splitters are an extension to the YG-1 to the V7 Plus range. They features 6 flutes with special chip splitters on each flute. This improves swarf management in trochoidal and end milling ... read more >
    New 6 flute geometry with special chip splitters on each flute
    Chip splitter improves swarf management in trochoidal and end milling application ... read more >
    • P
    • M
    • S
    • K

    Starting at £30.29 £25.24

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 24 - 100
    • L2 - 75 - 170
    GMH59
  12. 6 Flute V7 Plus Chip Splitter Coated Carbide Corner Radius Plain Shank End Mill - GMH58 (YG-1)
    6 Flute V7 Plus Chip Splitter Coated Carbide Corner Radius Plain Shank End Mill - GMH58 (YG-1)
    The V7 chip splitters are an extension to the YG-1 to the V7 Plus range. They features 6 flutes with special chip splitters on each flute. This improves swarf management in trochoidal and end milling ... read more >
    New 6 flute geometry with special chip splitters on each flute
    Chip splitter improves swarf management in trochoidal and end milling application ... read more >
    • P
    • M
    • S
    • K

    Starting at £30.29 £25.24

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 24 - 100
    • L2 - 75 - 170
    GMH58
  13. 6 Flute V7 Plus 45 Degree Helix Coated Carbide Corner Radius Weldon Shank End Mill / Super Finisher / Trochoidal Mill - GMG17/GMG19 (YG-1)
    6 Flute V7 Plus 45 Degree Helix Coated Carbide Corner Radius Weldon Shank End Mill / Super Finisher / Trochoidal Mill - GMG17/GMG19 (YG-1)
    The GMG17/GMG19 series corner radius high helix end mills range from 6-25mm diameter with long flutes. The V7 plus 6 flute 45 degree helix range from YG-1 offer the highest metal removal rates for tro ... read more >

    The unique geometry of the variable pitch reduces chatter for high speed and trochoidal milling
    Y1200 coated ultrafine micrograin carbid ... read more >
    • P
    • M
    • S
    • K

    Starting at £22.19 £18.49

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 13 - 100
    • L2 - 57 - 170
    GMG17/GMG19
  14. 6 Flute V7 Plus 45 Degree Helix Coated Carbide Corner Radius Long Length End Mill / Super Finisher / Trochoidal Mill - GMG16/GMG18 (YG-1)
    6 Flute V7 Plus 45 Degree Helix Coated Carbide Corner Radius Long Length End Mill / Super Finisher / Trochoidal Mill - GMG16/GMG18 (YG-1)
    The GMG16/GMG18 series corner radius high helix end mills range from 6-25mm diameter. The V7 plus 6 flute 45 degree helix range from YG-1 offer the highest metal removal rates for trochoidal milling o ... read more >

    The unique geometry of the variable pitch reduces chatter for high speed and trochoidal milling
    Y1200 coated ultrafine micrograin carbid ... read more >
    • P
    • M
    • S
    • K

    Starting at £22.19 £18.49

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 13 - 100
    • L2 - 57 - 170
    GMG16/GMG18
  15. 6 Flute V7 Plus 45 Degree Helix Coated Carbide Weldon Shank End Mill / Super Finisher / Trochoidal Mill - GMG13/GMG15 (YG-1)
    6 Flute V7 Plus 45 Degree Helix Coated Carbide Weldon Shank End Mill / Super Finisher / Trochoidal Mill - GMG13/GMG15 (YG-1)
    The GMG13/GMG15 series range from 6-25mm diameter and have a weldon/flat shank. These come with 6 flutes and a 45° helix. The V7 plus range from YG-1 give exceptional performance in high metal remova ... read more >

    The unique geometry of the variable pitch reduces chatter for high speed and trochoidal milling
    Y1200 coated ultrafine micrograin carbid ... read more >
    • P
    • M
    • S
    • K

    Starting at £18.41 £15.34

    View Products
    • D1 - 6 - 25
    • D2 - 6 - 25
    • L1 - 13 - 100
    • L2 - 57 - 170
    GMG13/GMG15
  16. 4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Corner Radius Weldon Shank End Mill - GMF63 (YG-1)
    4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Corner Radius Weldon Shank End Mill - GMF63 (YG-1)
    GMF63 series CORNER RADIUS end mills are available from 3-20mm diameter with a Weldon shank. The neck of the cutter is reduced in diameter to prevent interference with the workpiece. The V7 plus rang ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £24.94 £20.78

    View Products
    • D1 - 3 - 20
    • D2 - 6 - 20
    • L1 - 7 - 26
    • L2 - 54 - 164
    GMF63
  17. 4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Corner Radius Plain Shank End Mill - GMF62 (YG-1)
    4 Flute V7 Plus Coated Carbide Reduced Neck Multiple Helix Corner Radius Plain Shank End Mill - GMF62 (YG-1)
    GMF62 series CORNER RADIUS end mills are available from 3-20mm diameter with a plain shank. The neck of the cutter is reduced in diameter to prevent interference with the workpiece. The V7 plus range ... read more >
    Y1200 coated ultrafine micrograin carbide
    HPC (High performance cutting)
    Multiple helix geometries and unequal flute spacing enable higher ... read more >
    • P
    • M
    • S
    • K

    Starting at £24.94 £20.78

    View Products
    • D1 - 3 - 20
    • D2 - 6 - 20
    • L1 - 7 - 26
    • L2 - 54 - 164
    GMF62

17 Items

Set Descending Direction