Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

All Plastic Cut Milling Cutters

Filter By arrow
carrat-down

33 Items

Sort By
carrat-down
sort-descending

The 13000 series solid carbide router for wood, foamboard, PVC and high pressure composites....

  • Upcut tools are the most commonly used tools.
  • Chips are evacuted upwards when machining/li>
  • Workpieces need to be maintained properly because the tool pulls the material upwards

Size

Diameter (mm)1 - 14
Overall Length (mm)30 - 120
Flute Length (mm)4 - 62
Shank (mm)2 - 14

From £31.54 £26.28

The 13000 series solid carbide router for wood, foamboard, PVC and high pressure composites....

  • Upcut tools are the most commonly used tools.
  • Chips are evacuted upwards when machining/li>
  • Workpieces need to be maintained properly because the tool pulls the material upwards

From £33.78 £28.15

The 176000 series 2 flute solid carbide upcut router for aluminium, plastics, resins, corians and wood....

  • Two flute end mills with a protection chamfer
  • Can cut some plastics, resins, HPL, Corian®
  • Better surface finish in pockets than one flute end mills

Size

Diameter (mm)3 - 16
Overall Length (mm)50 - 80
Flute Length (mm)7 - 25
Shank (mm)6 - 16

From £61.39 £51.16

The 40-000 series HSS router from LMT Onsrud is designed for routing applications where speed and chip removal are primary considerations....

  • Application: soft wood, hard wood, aluminium sheet
  • Recommended when grooving, slotting or blind routing

From £18.37 £15.31

The 40-100 series HSS router from LMT Onsrud provides a smoother finish than single flute. Upcut recommended for grooving, slotting, or blind routing....

  • Application: soft wood, hard wood, aluminium sheet
  • Two flute upcut spiral
  • Provides a smoother finish than single flute tools

From £8.17 £6.81

The 52-000 series Solid Carbide router from LMT Onsrud is designed as a general purpose spiral with several times the life of their high speed steel counterparts....

  • Application: fibreglass, solid surface, aluminium slab
  • Two flute upcut
  • Designed as a general purpose spiral
  • Used when upward chip flow is preferred
  • Helix angle: 30°

From £45.29 £37.74

The 52-000 series Solid Carbide router from LMT Onsrud is designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired....

  • Application: soft wood, hard wood, wood composite
  • Two flute upcut spiral
  • Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired
  • Helix angle: 30°

From £39.02 £32.52

The 63-500 series Solid Carbide router from LMT Onsrud are tools are designed to cut acrylics and achieve long tool life....

  • Application: acrylic
  • Unique cutting geometry produces a smooth edge finish regardless if it is cast or extruded acrylic
  • Long tool life is achieved
  • 1 flute upcut spiral O flute

From £52.62 £43.85

The 63-600 series Solid Carbide router from LMT Onsrud are high speed cutters for machining aluminium sheet and block material. These tools are optimised for use on high-speed CNC mills, high speed ma...

  • Application: aluminium sheet, aluminium Plate
  • Optimised for use on high-speed CNC mills, high speed machining centers and CNC routers
  • High speed cutters for machining aluminium sheet and block material
  • 1 flute upcut spiral O flute

From £47.47 £39.56

The 63-900 series Solid Carbide router from LMT Onsrud are high speed cutters for machining aluminium sheet and block material. These tools are optimised for use on high-speed CNC mills, high speed ma...

  • Application: aluminium sheet, aluminium Plate
  • For machining aluminium sheet and block material
  • For use on high-speed CNC mills, high speed machining centers and CNC routers
  • Helix angle: 22°

Size

Diameter (mm)2 - 10
Overall Length (mm)64 - 76
Flute Length (mm)6 - 38
Shank (mm)4 - 10

From £65.83 £54.86

The 22000 series solid carbide router is often used for thin workpieces and small sparts....

  • When cutting with a downcut end mill chips are thrown downwards
  • Downcut router has the advantage to push the material downwards which helps hold it

From £55.39 £46.16

The PLI series 2 flute solid carbide chamfer router for plastics, wood, foamboard and high pressure laminates. For grooving and folding....

  • Solid carbide chamfer mill suitable for plastics, wood, foamboard and high pressure laminates
  • Suitable for 45° chamfering/deburring and grooving applications where folding is required

Size

Diameter (mm)8 - 16
Overall Length (mm)50 - 50
Flute Length (mm)25 - 30
Shank (mm)6 - 12

From £174.42 £145.35

The FCOB series 2 flute solid carbide chamfer router is suitable for grooving and folding applications on diebond or alcubond materials....

  • Carbide tipped milling cutters designed to groove and fold ACM panels
  • Available with various chamfer angles including, 45°, 54° and 67.5°.

Size

Diameter (mm)19.05 - 20
Overall Length (mm)60 - 60
Flute Length (mm)3.6 - 8.5
Shank (mm)8 - 9.52

From £153.61 £128.01

The STRATR series 3 flute solid carbide router with chipbreakers for high pressure laminates and phenolic materials....

  • End mills for HPL and phenolic materials (very abrasives materials)
  • Three flutes allow improved tool life whereas chipbreakers reduce stress on the spindle

Size

Diameter (mm)6 - 8
Overall Length (mm)20 - 20
Flute Length (mm)60 - 64
Shank (mm)6 - 8

From £109.34 £91.12

The 11700 series 2 flute solid carbide ball nosed router is suitable for 3D applications and for plastics, wood, foamboard and composite wood....

  • Developed for 3D milling
  • For machining plastics, wood, foamboard and composite wood.
  • Ball nosed

Size

Diameter (mm)3 - 12
Overall Length (mm)90 - 200
Flute Length (mm)15 - 50
Shank (mm)6 - 12

From £98.92 £82.43

The 16000 series 2 flute solid carbide upcut router for plastics, wood and foamboard....

  • Two flute end mill
  • When cutting foam it allows a very good surface finish and a longer tool life

Size

Diameter (mm)6 - 12
Overall Length (mm)76 - 80
Flute Length (mm)22 - 35
Shank (mm)6 - 12

From £65.32 £54.43

The 11-00 series HSS router from LMT Onsrud is designed for cutting softer more flexible plastics. Single flute for faster feed rates, excellent for hand-fed operations....

  • Application: soft plastic, hard plastic
  • Excellent for hand-fed operations
  • High steel steel, straight O flute
  • 1 flute for faster feed rates

From £22.39 £18.66

The 64-000 series Solid Carbide router from LMT Onsrud has a polished flute which allows for razor sharp cutting edge and easy chip evacuation....

  • Application: plastic, wood, aluminium, solid surface
  • The polished flute gives a razor sharp cutting edge and provides easy chip evacuation
  • Down cut spiral for improved part holding

From £56.15 £46.79

The 65-000 series Solid Carbide router from LMT Onsrud has a polished flute which allows for razor sharp cutting edge and easy chip evacuation....

  • Application: plastic, wood, aluminium, solid surface
  • The polished flute gives a razor sharp cutting edge and provides easy chip evacuation
  • Down cut spiral for improved part holding

From £56.15 £46.79

The 65-300B series Solid Carbide router from LMT Onsrud has a unique geometry specially designed point, and highly polished primary clearance....

  • Application: soft plastic
  • Great surface finish
  • 4 flute high finish ballnose for plastics

From £143.32 £119.43

The 66-000 series Solid Carbide router from LMT Onsrud is designed for rounding the edge of sheets or parts....

  • Application: soft plastic, hard plastic, solid surface
  • Straight O flute
  • Edge rounding
  • Single flute, solid carbide

From £81.08 £67.57

The 66-000 series Solid Carbide router from LMT Onsrud is designed for rounding the edge of sheets or parts....

  • Application: soft plastic, hard plastic, solid surface
  • Straight O flute
  • Edge rounding
  • 2 flute solid carbide

From £89.14 £74.28

The 66-000 series Solid Carbide router from LMT Onsrud is designed for rounding the edge of sheets or parts....

  • Application: soft plastic, hard plastic, solid surface
  • Straight v-flute
  • Edge rounding
  • 2 flute solid carbide

From £130.85 £109.04

The YG-1 E5E47 series plastic cut has a single lapped flute design for excellent workpiece finish and chip evacuation. The wide, drawing up cut geometry is ideal for plastics such as ABS, acrylic and ...

  • Lapped Flute Design for Excellent Workpiece Finish
  • Single Flute for Excellent Chip Evacuation
  • Wide Cut Geometry for Dedicated Plastic Machining
  • Drawing Cut (Up Cut)
  • Router Style Cutter Prevents Chip Build Up in Flute Pockets

Size

Diameter (mm)2 - 12
Overall Length (mm)50 - 80
Flute Length (mm)8 - 30
Shank (mm)3 - 12

From £15.12 £12.60

The YG-1 E5E88 series plastic cut has a single lapped flute design for excellent workpiece finish and chip evacuation. The wide, drawing up cut geometry is ideal for plastics such as ABS, acrylic and ...

  • Lapped Flute Design for Excellent Workpiece Finish
  • Single Flute for Excellent Chip Evacuation
  • Wide Cut Geometry for Dedicated Plastic Machining
  • Drawing Cut (Up Cut)
  • Router Style Cutter Prevents Chip Build Up in Flute Pockets

Size

Diameter (mm)0.5 - 12
Overall Length (mm)40 - 120
Flute Length (mm)1 - 55
Shank (mm)4 - 12

From £26.30 £21.92