The 52-200BL series XL Solid Carbide router from LMT Onsrud is designed for carving and modeling operations. Their tip geometry gives a superior cut....
Application: soft wood, hard wood, wood composite, soft plastic, hard plastic, aluminium
Two flute upcut spiral ball nose
Their improved tip geometry gives a superior cut compared to most ballnose endmills
The 56-430 series Solid Carbide router from LMT Onsrud is designed with free cutting O flute geometry along with a double flute design for smooth finish....
The 57-000 series Solid Carbide router from LMT Onsrud is designed as a general purpose spiral with several times the life of their high speed counterparts....
The 11-00 series HSS router from LMT Onsrud is designed for cutting softer more flexible plastics. Double flute for smoother finish, excellent for hand-fed operations....
The 57-900 series Solid Carbide router from LMT Onsrud is designed for routing where extreme loads are placed upon the cutting tools and when extra part hold down is required....
Application: soft wood, hard wood, wood composites
Designed for routing where extreme loads are placed upon the cutting tools
The 52-700 series Solid Carbide router from LMT Onsrud has a high helix geometry designed to cut soft plastic with a smooth finish and upward chip flow. Special point geometry for improved bottom fini...
Application: soft plastic, solid surface, foam, soft wood, hard wood
The 52-400 series Solid Carbide router from LMT Onsrud is designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired....
The 52-000 series Solid Carbide router from LMT Onsrud is designed as a general purpose spiral with several times the life of their high speed steel counterparts....
The 52-000 series Solid Carbide router from LMT Onsrud is designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired....
Application: soft wood, hard wood, wood composite
Two flute upcut spiral
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired
The 40-50 series carbide tipped router from LMT Onsrud is designed to put a radius on the edge and dress the stock. They will provide a smooth finish....
Application: soft wood, hard wood, wood composites, plastic, solid surface
The 90-00 series solid carbide router from LMT Onsrud is designed to bore a hole and rout a T shape slot for plaques and frames to provide for built in wall mounting capabilities....
The 40-100 series HSS router from LMT Onsrud provides a smoother finish than single flute. Upcut recommended for grooving, slotting, or blind routing....
Application: soft wood, hard wood, aluminium sheet
Two flute upcut spiral
Provides a smoother finish than single flute tools
The 37-80 series carbide tipped router from LMT Onsrud is designed for V grooving or beveling edges of parts. The tools are designed to cut a wide variety of wood products and produce a clean edge....
