The NPR series 2 flute solid carbide chamfer router is for suitable for a range of materials including plastics, wood, foamboard and high pressure laminates....
Carbide tipped milling cutters to chamfer workpieces
Chamfer angles available in 30°, 45°, 50°, 60° and 70°
For chamfering applications on a range of materials including: plastics, wood, foamboard and high pressure laminates
The 63-900 series Solid Carbide router from LMT Onsrud are high speed cutters for machining aluminium sheet and block material. These tools are optimised for use on high-speed CNC mills, high speed ma...
Application: aluminium sheet, aluminium Plate
For machining aluminium sheet and block material
For use on high-speed CNC mills, high speed machining centers and CNC routers
The 52-600 series Solid Carbide router from LMT Onsrud has a low helix geometry designed to cut soft and hard plastic with a smooth finish and upward chip flow....
Application: soft plastic, hard plastic, solid surface
The PLIH series 1 Flute Solid Carbide solid carbide chamfer router for aluminium diebond or alcubond grooving and folding, not recommended in plastics....
Solid carbide milling cutter designed to groove and fold ACM panels like Dibond® or Alucobond® as well as aluminum (use coolant to cut aluminum)
This cutter gives better surface finish, higher cutting speeds and effective chip evacuation
Available with various chamfer angles including, 45°, 54° and 67.5°
The 12000 series solid carbide router for wood, foamboard, PVC and high pressure composites. This kind of tool is often used for small parts and thin workpieces....
When cutting with a downcut end mill the chips are thrown downwards
There may be poor evacuation, however, the tool pushes the material downwards which helps for maintaining this
Often used for think workpieces and small parts
Recommended to have a space between sacrificial plate and material for correct chips evacuation
The 40-100 series HSS router from LMT Onsrud provides a smoother finish than single flute. Upcut recommended for grooving, slotting, or blind routing....
Application: soft wood, hard wood, aluminium sheet
Two flute upcut spiral
Provides a smoother finish than single flute tools
The 11-00 series HSS router from LMT Onsrud is designed for cutting softer more flexible plastics. Single flute for faster feed rates, excellent for hand-fed operations....
The 28-20 series solid carbide router from LMT Onsrud has spirals designed to trim stacked sheets of plastic in hand-fed applications. They use a double bearing guide to ensure smooth cutting action a...
Application: laminates, plastic
Double bearing plastic trim
2 flute
Designed to trim stacked sheets of plastic in hand-fed applications
The 67-000 series Solid Carbide router from LMT Onsrud is designed as a fibreglass router. Their upcut/downcut diamond design effectively shears fibrous materials....
The 37-80 series carbide tipped router from LMT Onsrud is designed for V grooving or beveling edges of parts. The tools are designed to cut a wide variety of wood products and produce a clean edge....
The 52-000 series Solid Carbide router from LMT Onsrud is designed as a general purpose spiral with several times the life of their high speed steel counterparts....
The 52-400 series Solid Carbide router from LMT Onsrud is designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired....
