Call us 8am - 6pm 01924 869660

help Help
basket-added
cross Close Menu
Shop
Accounts
burger cross View Products Close Menu

Products

help Help
basket-added Basket

Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

BUY 2 BOXES GET 1 FREE ON TURNING, GROOVING & PARTING INSERTS   - VIEW NOW
HURRY... OFFER ENDS TODAY

Quick Change Toolposts

Filter By arrow
carrat-down

8 Items

Sort By
carrat-down
sort-descending
Quick Change Toolpost - 4414 Series (Bison)
Quick Change Toolpost - 4414 Series (Bison)

The Bison quick change tool post system is ideal for quick changeover of tools with precise repeatability. Bison toolposts, with the dovetail design, are fully compatible with Dickson toolposts and a...

  • Bison toolposts - dovetail design.
  • Fully compatible with Dickson toolposts and are typically found on most Colchester lathes and many other conventional or manual lathes.
  • Clamping locations for left, right or axial approach and can be used for holding boring bars, turning tools, round shank tools and parting off tools using the quick change tool holders.
  • Made by Bison
  • For more information please call 01924 869 610

From £313.20 £261.00

View Products
Quick Change Standard Tool Holder for Square Shank Tools - 4494 Series (Bison)
Quick Change Standard Tool Holder for Square Shank Tools - 4494 Series (Bison)

The standard tool holder series can clamp square shanks between 12mm and 32mm. Each individual tool holder has a different clamping capacity. The Bison quick change tool post system is ideal for quick...

  • Clamp square shanks between 12mm and 32mm.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts.
  • Made by Bison
  • Please contact our technical team if you wish to check compatibility with square shank tools - call 01924 869 610

From £68.40 £57.00

View Products
Quick Change Tool Holder for Boring Bars - 4499 Series (Bison)
Quick Change Tool Holder for Boring Bars - 4499 Series (Bison)

The boring bar holders are available in 3 sizes and are suitable for clamping either 25mm, 32mm or 40mm tools. The Bison quick change tool post system is ideal for quick changeover of tools and are fu...

  • Available in 3 sizes
  • Suitable for clamping either 25mm, 32mm or 40mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts. 
  • Made by Bison
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £154.80 £129.00

View Products
Quick Change Vee Type Tool Holder for Round Shank Tools - 4495 Series (Bison)
Quick Change Vee Type Tool Holder for Round Shank Tools - 4495 Series (Bison)

The vee type tool holder series can clamp round shanks up to 25.5mm. Each individual tool holder has a different clamping capacity. The Bison quick change tool post system is ideal for quick changeove...

  • Clamp round shanks up to 25.5mm.
  • Each individual tool holder has a different clamping capacity.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts
  • Made by Bison
  • . Please contact our technical team if you wish to check compatibility with square shank tools. - call 01924 869 610

From £68.40 £57.00

View Products
Dickson Quick Change Toolpost Pratt Burnerd)
Dickson Quick Change Toolpost Pratt Burnerd)

The Pratt burnerd quick change tool post system is ideal for quick changeover of tools with precise repeatability. Pratt burnerd toolposts feature a dovetail design, with the Dickson Quick Change syst...

  • Pratt Burnerd toolposts - dovetail design.
  • Fully compatible with dickson toolholders and are typically found on most Colchester lathes and many other conventional or manual lathes.
  • Clamping locations for left, right or axial approach and can be used for holding boring bars, turning tools, round shank tools and parting off tools using the quick change tool holders.
  • Made by Pratt Burnerd
  • For more information please call 01924 869 610

From £541.99 £451.66

View Products
Dickson Quick Change Standard Tool Holder (Pratt Burnerd)
Dickson Quick Change Standard Tool Holder (Pratt Burnerd)

The standard tool holder series can clamp square shanks between 20mm and 32mm. Each individual tool holder has a different clamping capacity. The Pratt Burnerd quick change tool post system is ideal f...

  • Clamp square shanks between 20mm and 32mm.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts.
  • Made by Pratt Burnerd
  • Please contact our technical team if you wish to check compatibility with square shank tools - call 01924 869 610

From £122.57 £102.14

View Products
Dickson Quick Change Plain Boring Bar Tool Holder (Pratt Burnerd)
Dickson Quick Change Plain Boring Bar Tool Holder (Pratt Burnerd)

The boring bar holders are available in 4 sizes and are suitable for clamping either 25mm, 32mm, 40mm and 50mm tools. The Pratt Burnerd quick change tool post system is ideal for quick changeover of t...

  • Available in 4 sizes
  • Suitable for clamping either 25mm, 32mm, 40mm and 50mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolpost
  • Made by Pratt Burnerd
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £181.04 £150.87

View Products
Dickson Quick Change Morse Taper Holder (Pratt Burnerd)
Dickson Quick Change Morse Taper Holder (Pratt Burnerd)

The boring bar holders are available in 4 sizes and are suitable for clamping either 25mm, 32mm, 40mm and 50mm tools. The Pratt Burnerd quick change tool post system is ideal for quick changeover of t...

  • Available in 4 sizes
  • Suitable for clamping either 25mm, 32mm, 40mm and 50mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolpost
  • Made by Pratt Burnerd
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £145.06 £120.88

View Products