Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

High Performance Universal UNF Machine Taps

High Performance Universal UNF Machine Taps

High performance UNF (Unifled National Fine) machine taps for all materials. The powder metal substrate with advanced geometries ensure exceptional tool life and thread quality.

Filter By arrow
carrat-down

6 Items

Sort By
carrat-down
sort-descending

Prime-X YG-1 Premium HSS-PM Machine Taps have a unique X-coating and a tough chip resistant cutting edge which provide ultra long tool life, high heat resistance and high performance tapping on a wide...

  • Unified Fine Prime-X Universal Plus Machine Tap
  • New YG-1 X-coating provides high heat and wear resistance
  • Premium Powder Metal Substrate with tough-chipping resistant cutting edge
  • For High Performance Purpose Tapping on Steel, Stainless Steel, Cast Iron & Non-Ferrous
  • Special thread structure for the reduction of torque, wear and risk of overfeeding
  • Unrestricted chip flow as a result of the optimised combination of substrate, coating and geometry
  • Spiral Flute geometry for Blind Holes

Size

Overall Length (mm)56 - 140
Flute Length (mm)5.1 - 21.2
Shank (mm)3.5 - 20

From £35.81 £29.84

Prime-X YG-1 Premium HSS-PM Machine Taps have a unique X-coating and a tough chip resistant cutting edge which provide ultra long tool life, high heat resistance and high performance tapping on a wide...

  • Unified Fine Prime-X Universal Plus Machine Tap
  • New YG-1 X-coating provides high heat and wear resistance
  • Premium Powder Metal Substrate with tough-chipping resistant cutting edge
  • For High Performance Purpose Tapping on Steel, Stainless Steel, Cast Iron & Non-Ferrous
  • Special thread structure for the reduction of torque, wear and risk of overfeeding
  • Unrestricted chip flow as a result of the optimised combination of substrate, coating and geometry
  • Spiral point geometry for Through Holes

Size

Overall Length (mm)56 - 140
Flute Length (mm)11 - 28
Shank (mm)3.5 - 20

From £35.81 £29.84

The YG-1 TRJ14 UNF Powder Metal Universal Plus Machine Taps are part of the Prime Tap range for high performance tapping on: Steel, Pre-Hardened Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Co...

  • UNF Universal Plus Machine Tap
  • Powder Metal Substrate for increased tool life
  • For High Performance Purpose Tapping on Steel, Pre-Hardened Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Copper, Copper Alloy & Aluminium
  • Patented design to prevent over feeding and premature tap failure
  • Bright finish prevents swarf sticking to the tap flutes
  • Spiral point geometry for through holes

Size

Overall Length (mm)56 - 140
Flute Length (mm)11 - 28
Shank (mm)3.5 - 20

From £12.06 £10.05

The YG-1 TRE14 UNF Powder Metal Universal Plus Machine Taps are part of the Prime Tap range for high performance tapping on: Steel, Pre-Hardened Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Co...

  • UNF Universal Plus Machine Tap
  • Powder Metal Substrate for increased tool life
  • For High Performance Purpose Tapping on Steel, Pre-Hardened Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Copper, Copper Alloy & Aluminium
  • Patented design to prevent over feeding and premature tap failure
  • Bright finish prevents swarf sticking to the tap flutes
  • Spiral Flute geometry for Blind Holes

Size

Overall Length (mm)56 - 140
Flute Length (mm)7 - 20
Shank (mm)3.5 - 20

From £30.29 £25.24

Italian made UNF carbide machine taps suitable for high speed tapping. Carbide machine taps can achieve up to 10 times more tool life than HSS taps. These must be used with a synchro or tension compre...

  • UNF (Unified Fine)
  • Up to 10x more tool life than HSS taps
  • Suitable for high speed tapping
  • Must be used with a synchro or tension compression tap chuck
  • Made in Italy
  • Same tap can be used for blind and through holes
  • NFS Coated
  • Ideal for Steel, Tool Steel, Stainless Steel, HRSA's & Cast Iron

Size

Overall Length (mm)56 - 100
Flute Length (mm)11 - 22
Shank (mm)3.5 - 10

From £85.23 £85.23

Italian made UNF carbide machine taps suitable for high speed tapping. Carbide machine taps can achieve up to 10 times more tool life than HSS taps. These must be used with a synchro or tension compre...

  • UNF (Unified Fine)
  • Up to 10x more tool life than HSS taps
  • Suitable for high speed tapping
  • Must be used with a synchro or tension compression tap chuck
  • Made in Italy
  • Same tap can be used for blind and through holes
  • Uncoated
  • Ideal for Aluminium & Non-Ferrous

Size

Overall Length (mm)56 - 100
Flute Length (mm)11 - 22
Shank (mm)3.5 - 10

From £97.17 £97.17