WTO QuickFlex Adapters | Cutwel - Tool Holding Specialists

QuickFlex ER Collet Chuck Adapter, Short Length (WTO)

QuickFlex ER Collet Chuck Adapter, Short Length (WTO)

The WTO QuickFlex collet chuck adapter can be used with standard ER collets to clamp on cylindrical shank tools such as milling cutters, drills and taps. QuickFlex® is a modular quick change tooling ...

ER Collet Chuck Adapter for WTO QuickFlex System
QuickFlex® is a modular quick change tooling system for WTO driven & static toolholders.
WTO driven tools can be used with an ER collet mounted directly in the holder OR with the use of QuickFlex adapters.
QuickFlex adapters can be changed over in several seconds using the patented one-hand wrench
Enables safe and simple changing of cutting tools whilst the driven tool is still in the machine and eliminates the need for re-setting tool lengths on the machine.
Adapters are available in ER collet chucks (extra short, standard and mini nut type), Weldon/whistle notch and face mill arbors.
The adapters feature a polygon drive which locates securely in the driven tool and prevents the adapter from slipping, especially in high torque applications.
Tool run-out is less than 5 microns and 3xD tool length.

From £340.52 £283.77

View Products

QuickFlex ER Collet Chuck Adapter, Long Length (WTO)

QuickFlex ER Collet Chuck Adapter, Long Length (WTO)

The WTO QuickFlex collet chuck adapter can be used with standard ER collets to clamp on cylindrical shank tools such as milling cutters, drills and taps. QuickFlex® is a modular quick change tooling ...

ER Collet Chuck Adapter for WTO QuickFlex System
QuickFlex® is a modular quick change tooling system for WTO driven & static toolholders.
WTO driven tools can be used with an ER collet mounted directly in the holder OR with the use of QuickFlex adapters.
QuickFlex adapters can be changed over in several seconds using the patented one-hand wrench
Enables safe and simple changing of cutting tools whilst the driven tool is still in the machine and eliminates the need for re-setting tool lengths on the machine.
Adapters are available in ER collet chucks (extra short, standard and mini nut type), Weldon/whistle notch and face mill arbors.
The adapters feature a polygon drive which locates securely in the driven tool and prevents the adapter from slipping, especially in high torque applications.
Tool run-out is less than 5 microns and 3xD tool length.

From £361.39 £301.16

View Products

QuickFlex Combination Face Mill Arbor Adapter (WTO)

QuickFlex Combination Face Mill Arbor Adapter (WTO)

The WTO QuickFlex combination arbor adapter can be used to clamp tooling via a spigot such as face mills, shell mills, side mills or disk cutters. QuickFlex® is a modular quick change tooling system ...

Face Mill Arbor Adapter for WTO QuickFlex System
QuickFlex® is a modular quick change tooling system for WTO driven & static toolholders.
WTO driven tools can be used with an ER collet mounted directly in the holder OR with the use of QuickFlex adapters.
QuickFlex adapters can be changed over in several seconds using the patented one-hand wrench
Enables safe and simple changing of cutting tools whilst the driven tool is still in the machine and eliminates the need for re-setting tool lengths on the machine.
Adapters are available in ER collet chucks (extra short, standard and mini nut type), Weldon/whistle notch and face mill arbors.
The adapters feature a polygon drive which locates securely in the driven tool and prevents the adapter from slipping, especially in high torque applications.
Tool run-out is less than 5 microns and 3xD tool length.

From £248.48 £207.07

View Products

QuickFlex Static Tool Holder Adapter (WTO)

QuickFlex Static Tool Holder Adapter (WTO)

The WTO QuickFlex static tooling adapter is suitable for use with WTO static tool holders. This provides a flexible solution to clamping various different tool holders and shank sizes in one static to...

QuickFlex Adapter for WTO Static Tool Holders
Flexible solution to clamping various different tool holders and shank sizes in one static tool holder
Uses an ER collet system for cylindrical shanks whilst adapters are available with weldon shank and face mill arbor outputs.
QuickFlex® is a modular quick change tooling system for WTO driven & static toolholders.

From £420.84 £350.70

View Products

QuickFlex ER Collet Chuck Adapter (WTO)

The WTO QuickFlex collet chuck adapter can be used with standard ER collets to clamp on cylindrical shank tools such as milling cutters, drills and taps. QuickFlex® is a modular quick change tooling ...

ER Collet Chuck Adapter for WTO QuickFlex System
QuickFlex® is a modular quick change tooling system for WTO driven & static toolholders.
WTO driven tools can be used with an ER collet mounted directly in the holder OR with the use of QuickFlex adapters.
QuickFlex adapters can be changed over in several seconds using the patented one-hand wrench
Enables safe and simple changing of cutting tools whilst the driven tool is still in the machine and eliminates the need for re-setting tool lengths on the machine.
Adapters are available in ER collet chucks (extra short, standard and mini nut type), Weldon/whistle notch and face mill arbors.
The adapters feature a polygon drive which locates securely in the driven tool and prevents the adapter from slipping, especially in high torque applications.
Tool run-out is less than 5 microns and 3xD tool length.

From £293.94 £244.95

View Products

QuickFlex Weldon/Whistle Notch Adapter (WTO)

QuickFlex Weldon/Whistle Notch Adapter (WTO)

The WTO QuickFlex weldon and whistle notch adapter can be used clamp tooling with Weldon (flat) shanks and whistle notch shanks. QuickFlex® is a modular quick change tooling system for WTO driven & s...

Weldon Shank/Whistle Notch Adapter for WTO QuickFlex System
QuickFlex® is a modular quick change tooling system for WTO driven & static toolholders.
WTO driven tools can be used with an ER collet mounted directly in the holder OR with the use of QuickFlex adapters.
QuickFlex adapters can be changed over in several seconds using the patented one-hand wrench
Enables safe and simple changing of cutting tools whilst the driven tool is still in the machine and eliminates the need for re-setting tool lengths on the machine.
Adapters are available in ER collet chucks (extra short, standard and mini nut type), Weldon/whistle notch and face mill arbors.
The adapters feature a polygon drive which locates securely in the driven tool and prevents the adapter from slipping, especially in high torque applications.
Tool run-out is less than 5 microns and 3xD tool length.

From £248.48 £207.07

View Products