Call us 8am - 5:30pm Call us 8am - 5pm Call us from 8am on Monday 01924 869660

help Help
basket-added
cross Close Menu
Shop
Accounts
burger cross View Products Close Menu

Products

help Help
basket-added Basket

Free Next Day Delivery
on orders over £69 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Dispatch
On orders placed up to 5.30pm

View All - Quick Change Toolposts & Toolholders

Filter By arrow
carrat-down

12 Items

Sort By
carrat-down
sort-descending
Quick Change Toolpost - 4414 Series (Bison)
Quick Change Toolpost - 4414 Series (Bison)

The Bison quick change tool post system is ideal for quick changeover of tools with precise repeatability. Bison toolposts, with the dovetail design, are fully compatible with Dickson toolposts and a...

  • Bison toolposts - dovetail design.
  • Fully compatible with Dickson toolposts and are typically found on most Colchester lathes and many other conventional or manual lathes.
  • Clamping locations for left, right or axial approach and can be used for holding boring bars, turning tools, round shank tools and parting off tools using the quick change tool holders.
  • Made by Bison
  • For more information please call 01924 869 610

From £263.09 £219.24

View Products
Quick Change Standard Tool Holder for Square Shank Tools - 4494 Series (Bison)
Quick Change Standard Tool Holder for Square Shank Tools - 4494 Series (Bison)

The standard tool holder series can clamp square shanks between 12mm and 32mm. Each individual tool holder has a different clamping capacity. The Bison quick change tool post system is ideal for quick...

  • Clamp square shanks between 12mm and 32mm.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts.
  • Made by Bison
  • Please contact our technical team if you wish to check compatibility with square shank tools - call 01924 869 610

From £57.46 £47.88

View Products
Dickson Quick Change Toolpost (Pratt Burnerd)
Dickson Quick Change Toolpost (Pratt Burnerd)

The Pratt burnerd quick change tool post system is ideal for quick changeover of tools with precise repeatability. Pratt burnerd toolposts feature a dovetail design, with the Dickson Quick Change syst...

  • Pratt Burnerd toolposts - dovetail design.
  • Fully compatible with dickson toolholders and are typically found on most Colchester lathes and many other conventional or manual lathes.
  • Clamping locations for left, right or axial approach and can be used for holding boring bars, turning tools, round shank tools and parting off tools using the quick change tool holders.
  • Made by Pratt Burnerd
  • For more information please call 01924 869 610

From £619.46 £516.22

View Products
Quick Change Tool Holder for Boring Bars - 4499 Series (Bison)
Quick Change Tool Holder for Boring Bars - 4499 Series (Bison)

The boring bar holders are available in 3 sizes and are suitable for clamping either 25mm, 32mm or 40mm tools. The Bison quick change tool post system is ideal for quick changeover of tools and are fu...

  • Available in 3 sizes
  • Suitable for clamping either 25mm, 32mm or 40mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts. 
  • Made by Bison
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £130.03 £108.36

View Products
Dickson Quick Change Standard Tool Holder (Pratt Burnerd)
Dickson Quick Change Standard Tool Holder (Pratt Burnerd)

The standard tool holder series can clamp square shanks between 20mm and 32mm. Each individual tool holder has a different clamping capacity. The Pratt Burnerd quick change tool post system is ideal f...

  • Clamp square shanks between 20mm and 32mm.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts.
  • Made by Pratt Burnerd
  • Please contact our technical team if you wish to check compatibility with square shank tools - call 01924 869 610

From £127.24 £106.03

View Products
Quick Change Anti-Vibration Tool Holder for Boring Bars - 4498 Series (Bison)
Quick Change Anti-Vibration Tool Holder for Boring Bars - 4498 Series (Bison)

The anti-vibration tool holder inceases machining rigidity and reduces chatter due to its collapsable stye. The anti-vibration tool holder inceases machining rigidity and reduces chatter due to its co...

  • Available in 3 sizes
  • Suitable for clamping either 19mm, 25.4mm or 38mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts. 
  • Made by Bison
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £135.07 £112.56

View Products
Quick Change Parting Off Tool Holder - 4496 Series (Bison)
Quick Change Parting Off Tool Holder - 4496 Series (Bison)

The parting off tool holder can hold various parting blade sizes from 13mm-25.5mm. The Bison quick change tool post system is ideal for quick changeover of tools and are fully compatible with Dickson ...

  • Hold various parting blade sizes from 13mm-25.5mm.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts.
  • Made by Bison
  • Please feel free to contact our technical team should you wish to check tool compatibility - call 01924 869 610

From £96.77 £80.64

View Products
Quick Change Tool Holder for Morse Taper Tools - 4497 Series (Bison)
Quick Change Tool Holder for Morse Taper Tools - 4497 Series (Bison)

The morse taper tool holder series is ideal for clamping from morse taper 1 to morse taper 3 tooling. The Bison quick change tool post system is ideal for quick changeover of tools and are fully compa...

  • For clamping from morse taper 1 to morse taper 3 tooling.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts. Individual sizes apply, please check dimensions below. Please contact our technical team should you wish to check compatibility.
  • Made by Bison
  • Please check dimensions or contact our technical team should you wish to check compatibility. - call 01924 869 610

From £119.95 £99.96

View Products
Quick Change Vee Type Tool Holder for Round Shank Tools - 4495 Series (Bison)
Quick Change Vee Type Tool Holder for Round Shank Tools - 4495 Series (Bison)

The vee type tool holder series can clamp round shanks up to 25.5mm. Each individual tool holder has a different clamping capacity. The Bison quick change tool post system is ideal for quick changeove...

  • Clamp round shanks up to 25.5mm.
  • Each individual tool holder has a different clamping capacity.
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolposts
  • Made by Bison
  • . Please contact our technical team if you wish to check compatibility with square shank tools. - call 01924 869 610

From £57.46 £47.88

View Products
Dickson Quick Change Plain Boring Bar Tool Holder (Pratt Burnerd)
Dickson Quick Change Plain Boring Bar Tool Holder (Pratt Burnerd)

The boring bar holders are available in 4 sizes and are suitable for clamping either 25mm, 32mm, 40mm and 50mm tools. The Pratt Burnerd quick change tool post system is ideal for quick changeover of t...

  • Available in 4 sizes
  • Suitable for clamping either 25mm, 32mm, 40mm and 50mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolpost
  • Made by Pratt Burnerd
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £206.92 £172.43

View Products
Dickson Quick Change Vee Type Holder (Pratt Burnerd)
Dickson Quick Change Vee Type Holder (Pratt Burnerd)

The holders are available in 3 sizes and are suitable for clamping up to 16mm, 19mm and 25mm round shank tools. The Pratt Burnerd quick change tool post system is ideal for quick changeover of tools D...

  • Available in 3 sizes
  • suitable for clamping up to 16mm, 19mm and 25mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolpost
  • Made by Pratt Burnerd
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £150.37 £125.31

View Products
Dickson Quick Change Morse Taper Holder (Pratt Burnerd)
Dickson Quick Change Morse Taper Holder (Pratt Burnerd)

The boring bar holders are available in 4 sizes and are suitable for clamping either 25mm, 32mm, 40mm and 50mm tools. The Pratt Burnerd quick change tool post system is ideal for quick changeover of t...

  • Available in 4 sizes
  • Suitable for clamping either 25mm, 32mm, 40mm and 50mm tools
  • Ideal for quick changeover of tools and are fully compatible with Dickson toolpost
  • Made by Pratt Burnerd
  • Please contact our technical team if you wish to check tool compatibility - call 01924 869 610

From £165.79 £138.16

View Products