Hydraulic Chucks | Cutwel

BT40 High Torque Tendo E-Compact Chuck 25,000RPM G2.5 (Schunk)

BT40 Schunk Tendo-E Compact Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5. Hydraulic chucks offer b...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
Increased tool life
Quick setup times
Additional shank diameters can be clamped using intermediate sleeves
Through coolant
German made, premium quality & high performance

Diameter (mm)	12 - 20

From £277.62 £231.35

View Products

BT40 Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

BT40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 20

From £263.10 £219.25

View Products

BT40 Short & Narrow HPH Chuck 25,000RPM G2.5 (WTE)

BT40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & narro...

Short & Narrow Design for ultimate rigidity and nominal diameter clamping
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	6 - 32

From £460.98 £384.15

View Products

HSK63A Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

HSK63A WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & hea...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	20 - 20

From £259.68 £216.40

View Products

HSK63A Short & Heavy HPH Chuck KKB Type 25,000RPM G2.5 (WTE)

HSK63A WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & hea...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Through Coolant with KKB Resealable Coolant Bores
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 20

From £201.60 £168.00

View Products

BT30 Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT30 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	8 - 20

From £227.30 £189.42

View Products

BT40 Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 32

From £218.39 £181.99

View Products

BT40 Ultra Short Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 Ultra Short Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and the ultra short design makes them id...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Ultra short design for extra-long drills
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	20 - 20

From £341.74 £284.78

View Products

BT40 Long, Slim & Tapered Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 Long, Slim & Tapered Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and are ideal for 5 axis machin...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
3°taper (per side), ideal for moulds
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 20

From £285.97 £238.31

View Products

SK40 Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 32

From £218.39 £181.99

View Products

HSK63A Short & Rigid Hydraulic Chuck 25,000RPM G2.5 (WTE)

HSK63A WTE Short & Rigid Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and are ideal for ...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	20 - 20

From £254.05 £211.71

View Products

HSK63A Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK63A YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for no...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	6 - 32

From £293.22 £244.35

View Products

HSK63F Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

HSK63F WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose pro...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	6 - 25

From £508.48 £423.73

View Products

BT40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

BT40 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 58mm or 72.5mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	12 - 20

From £147.26 £122.72

View Products

SK40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

SK40 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 50mm or 64.5mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Diameter (mm)	12 - 20

From £147.26 £122.72

View Products

SK40 Slim 4ax High Torque Tendo E-Compact Chuck 25,000RPM G2.5 (Schunk)

The SCHUNK TENDO Slim 4ax is the toolholder for axial machining. It is the only one of its class which meets every requirement: heat shrinking contour, easy handling, short set-up time, long tool life...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
Plug & Work: Replace a heat shrinking toolholder 1:1 without changing the process. Ready for immediate use!
Easy handling
Short set-up times
Longer tool life
High degree of flexibility
Additional shank diameters can be clamped using intermediate sleeves
German made, premium quality & high performance
High precision with excellent vibration damping for the best surface finish

Diameter (mm)	6 - 20

From £527.16 £439.30

View Products

HSK 63A Slim 4ax High Torque Tendo E-Compact Chuck 25,000RPM G2.5 (Schunk)

The SCHUNK TENDO Slim 4ax is the toolholder for axial machining. It is the only one of its class which meets every requirement: heat shrinking contour, easy handling, short set-up time, long tool life...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
Plug & Work: Replace a heat shrinking toolholder 1:1 without changing the process. Ready for immediate use!
Easy handling
Short set-up times
Longer tool life
High degree of flexibility
Additional shank diameters can be clamped using intermediate sleeves
German made, premium quality & high performance
High precision with excellent vibration damping for the best surface finish

Diameter (mm)	6 - 20

From £564.00 £470.00

View Products

BT40 Long & Ultra Narrow 3° HPH Chuck 25,000RPM G2.5 (WTE)

BT40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a Long & Ultra ...

Revolutionary Long & Narrow 3° Design can be used in applications only previously possible with shrink fit chucks
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	4 - 20

From £491.93 £409.94

View Products

SK40 Short & Heavy HPH Chuck 25,000RPM G2.5 (WTE)

SK40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & heavy...

Short & Heavy Design for ultimate rigidity and to be used with sleeves
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	12 - 20

From £248.21 £206.84

View Products

SK40 Short & Narrow HPH Chuck 25,000RPM G2.5 (WTE)

SK40 WTE HPH Chucks are balanced to 25,000RPM G2.5 and are the BEST holder for ultra high metal removal rates, ideal for extreme roughing to fine finishing in all materials. These have a short & narro...

Short & Narrow Design for ultimate rigidity and nominal diameter clamping
Standard Through Coolant Type
Balanced to 25,000RPM G2.5
Hydraulic Clamping with up to 40% better tool life than Shrink Fit Chucks
ULTRA High Meta Removal rates for extreme rouhghing to finsih finishing
Clamping forces <890kN (higher than shrink chucks)
Reliable clamping temperatures up to 170°C
Optimal radial run-out accuracy of 3 microns with a projection length of 2.5xD
Damping properties enable better surface finish with longer tool life
Made by WTE - 100% Manufactured in Germany

Diameter (mm)	6 - 32

From £460.98 £384.15

View Products

BT40 Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

BT40 WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	10 - 20

From £396.48 £330.40

View Products

SK50 Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK50 YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for nomi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Diameter (mm)	8 - 20

From £302.02 £251.68

View Products

SK40 Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

SK40 WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profi...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	6 - 32

From £396.48 £330.40

View Products

HSK63A Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

HSK63A WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose pro...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Diameter (mm)	6 - 32

From £400.73 £333.94

View Products

There are no products in your shopping basket.

Your Basket Summary

Suggestions

Products

Categories

View All Hydraulic Chucks

Cutwel