HSK100 Hydraulic Chucks | Cutwel - Tool Holding Supplier

HSK100A Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK100A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice ...

HSK100A back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 90mm or 100mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	20 - 32

From £274.40 £228.67

View Products

HSK100A Slim Hydraulic Chuck 25,000RPM G2.5 (YG-1)

HSK100A YG-1 Slim Hydraulic Chucks offer exceptional value whilst maintaining exceptional quality and performance. These come balanced up to 25,000RPM G2.5 and have a slimmer nose profile, ideal for n...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant

Size

Diameter (mm)	6 - 32

From £323.70 £269.75

View Products

HSK100A Slim Hydraulic Chuck 25,000RPM G2.5 (WTE)

HSK100A WTE Slim Hydraulic Chucks are 100% made in Germany and offer market leading performance and the very best machining results. These come balanced up to 25,000RPM G2.5 and have a slimmer nose pr...

Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
600Kn clamping force
Vibration damping effect
Increased tool life
Exceptional performance in drilling, reaming and high-speed machining
Flexible clamping range using reduction sleeves or direct clamping of the tool in the chuck
Quick setup times
Through coolant
WTE hydraulic chucks 100% made in Germany and offer market leading performance

Size

Diameter (mm)	12 - 32

From £629.96 £524.97

View Products