HSK50A Haimer shrink fit chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. Made in Germany, these chucks have a high runout accuracy and suitable for use with all availabl...
Chuck body fine balanced G2.5 at 25.000RPM or U < 1gmm
For clamping shank tools, suitable for use with all available shrink fit units
Extreme clamping torque by high pressing in the clamping bore
High runout accuracy (< 0.003 mm)
Without threaded holes in order to balance with balancing screws
Threaded bores for simple and fast balancing with screws
Short chamfer with slits along the clamping bore for cooling from outside
HSK50E Haimer extra slim mini shrink chucks are for clamping shank tools. Made in Germany, these chucks have a high runout accuracy and short chamfer, with a slim design for fine machining and for job...
Chuck body fine balanced U < 1gmm
Extreme clamping torque by high pressing in the clamping bore
Very slim design with 3° contour – for jobs difficult to accesss
For all solid carbide tools with h6 shank tolerance
Extreme slim design for fine machining
High runout accuracy (3μm)
Optimum rigidity and no disturbing edges
With 3° slope for dies and molds
Tool holders fine balanced
More accurate than DIN
Supplied without coolant tube
For clamping shank tools, suitable for use with all available shrink fit units
HSK50E Haimer mini shrink chucks are for clamping shank tools. Made in Germany, these chucks have a high runout accuracy and short chamfer, with a slim design for fine machining and for jobs that are ...
Chuck body fine balanced U < 1gmm
Extreme clamping torque by high pressing in the clamping bore
Very slim design with 3° contour – for jobs difficult to accesss
For all solid carbide tools with h6 shank tolerance
Slim design with high clamping forces
High runout accuracy (3μm)
Optimum rigidity and no disturbing edges
With 3° slope for dies and molds
Tool holders fine balanced
More accurate than DIN
Supplied without coolant tube
For clamping shank tools, suitable for use with all available shrink fit units
HSK50E Haimer shrink fit chucks offer a high-performance clamping solution. Made in Germany, these power chucks have an optimised design with high rigidity and dampening vibrations, therefore giving m...
Chuck body fine balanced U < 1gmm
For highest machining capacity in high-speed manufacturing
Extreme clamping torque by high pressing in the clamping bore
Without threaded holes in order to balance with balancing screws
Threaded bores for simple and fast balancing with screws
High runout accuracy (< 0.003mm)
More accurate than DIN
For HSS and solid carbide tools with h6 shank tolerance
HSK50A YG-1 Extra Slim 3° Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. YG-1 shrink chucks provide exceptional value whilst maintaining exceptional quality...
Extra slim shrink fit chuck for high performance
3° taper
Through coolant: AD
Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
For ultimate reliability, repeatability and machining quality
Ultra-long service life without distortion due to high quality hot work steel
HSK50A YG-1 Shrink Fit Chucks offer a high-performance clamping solution, balanced to 25,000RPM G2.5. YG-1 shrink chucks provide exceptional value whilst maintaining exceptional quality and performanc...
Premium shrink fit chucks provide high performance
4.5° taper
Through coolant: AD
Balanced to 25,000RPM G2.5
High run-out accuracy 0.003mm
For ultimate reliability, repeatability and machining quality
Ultra-long service life without distortion due to high quality hot work steel
