Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Rich Mill RM8 45 Degree Milling Bodies

Rich Mill RM8 45 Degree Milling Bodies

45° face milling with 8 cutting edges for low cost per edge. Korloy’s Rich Mill RM8 offers excepional performance in all face milling operations from roughing to fine finishing. The double sided inserts have 8 cutting edges for economical milling.

Filter By arrow
carrat-down

4 Items

Sort By
carrat-down
sort-descending

The Teknik LNMX/LNEX 90 degree face mill style milling body takes SNMX1206/SNEX1206 ISO inserts. Diameters range from 50-200mm and these are suitable for face milling. The inserts and holders are full...

  • Face Mill Style.
  • Economical 45°, face milling with SNMX inserts.
  • High rake angle provides low cutting resistance and smooth chip flow.
  • Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
  • Holders &, inserts compatible with other manufacturers tools.
  • Low cost insert and holders.
  • Perfect tool for low cost general machining.
  • Suitable for use with Korloy Rich Mill RM8 inserts.

Size

Diameter (mm)50 - 100

From £41.53 £34.61

The Teknik LNMX/LNEX 90 degree face mill style milling body takes SNMX1206/SNEX1206 ISO inserts. Diameters range from 50-200mm and these are suitable for face milling. The inserts and holders are full...

  • Face Mill Style.
  • Economical 45°, face milling with ISO inserts.
  • High rake angle provides low cutting resistance and smooth chip flow.
  • Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
  • Holders &, inserts compatible with other manufacturers tools.
  • Low cost insert and holders.
  • Perfect tool for low cost general machining.
  • Suitable for use with Korloy Rich Mill RM8 inserts.

Size

Diameter (mm)50 - 200

From £46.66 £38.88

The Korloy Rich Mill RM8ACM Series face mill is a 45 degree indexable milling tool that comes in multiple diameters ranging from 50mm - 400mm. This system utilises the high rake angle on the inserts a...

  • Double sided insert gives 8 usable cutting edges
  • High rake angle provides low cutting resistance and smooth chip flow, even in high feed/large depth of cut applications
  • Coolant is directed straight to the cutting edge
  • Suitable for roughing to finishing
  • 5 chipbreakers, MM for general machining, MF chip breaker for low power machines, ML for Stainless Steel & HRSA’s, MA for aluminium & special wiper geometry
  • Double sided inserts with 8 cutting edges

Size

Diameter (mm)50 - 400
Overall Length (mm)40 - 80
Shank (mm)22 - 60

From £200.40 £167.00

The Rich Mill RMH8ACM Series face mill (shim type) is a 45 degree indexable milling tool that comes in multiple diameters ranging from 50mm - 400mm. This system utilises the high rake angle on the ins...

  • Double sided insert gives 8 usable cutting edges
  • High rake angle provides low cutting resistance and smooth chip flow, even in high feed/large depth of cut applications
  • Coolant is directed straight to the cutting edge
  • Suitable for roughing to finishing
  • 5 chipbreakers, MM for general machining, MF chip breaker for low power machines, ML for Stainless Steel & HRSA’s, MA for aluminium & special wiper geometry
  • Double sided inserts with 8 cutting edges
  • Shim type (seat) to prevent cutter body from damage

Size

Diameter (mm)80 - 400
Overall Length (mm)50 - 80
Shank (mm)27 - 60

From £0.00 £0.00