Call us 8am - 6pm 01924 869660

help Help
basket-added
cross Close Menu
Shop
Accounts
burger cross View Products Close Menu

Products

help Help
basket-added Basket

Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

BUY 2 BOXES GET 1 FREE ON TURNING, GROOVING & PARTING INSERTS   - VIEW NOW
HURRY... OFFER ENDS TODAY

3 Flute (Square End) Aluminium Milling Cutters

Filter By arrow
carrat-down

17 Items

Sort By
carrat-down
sort-descending
3 Flute Alu-Power HPC Lapped Carbide Slot Drill - E5H22 (YG-1)
3 Flute Alu-Power HPC Lapped Carbide Slot Drill - E5H22 (YG-1)

The E5H22 series is available in a choice of flute lengths. The LAPPED flutes are ideal for soft/sticky materials with low wear resistance. While other 3-flute end mills can muster up the speed for ro...

  • Micrograin carbide substrate
  • Deep flute pockets
  • Extreme metal removal rates
  • Polished flutes for excellent chip flow
  • Effective chip evacuation at high feed rates with lower cutting forces
  • Highly effective in vertical ramping up to 20 degrees and��step-over plunging applications
  • 3 flute ���centre match��� HPC geometry for high feed rates & large depth of cut
  • To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck)

Size

Diameter (mm)3 - 25
Overall Length (mm)52 - 150
Flute Length (mm)8 - 80
Shank (mm)6 - 25

From £23.53 £19.61

View Products
3 Flute Lapped 45 Degree Helix Carbide Square A Star Aluminium End Mill (Korloy)
3 Flute Lapped 45 Degree Helix Carbide Square A Star Aluminium End Mill (Korloy)

The Korloy AFE3 series A Star mirror finish aluminum cutter has 3 flutes, a plain shank and a square end. These are made from a micrograin carbide substrate. The A Star range from Korloy is designed f...

  • Suitable for high speed roughing of aluminium and other non-ferrous materials.
  • First choice for general machining of aluminium and copper with medium to high cutting speeds where surface finish and accuracy are important.
  • Wide choice of lengths from very short to extra long.
  • Superior tool life, mirror surface finish, accuracy and chip control vs economy 3 flute tools.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.

Size

Diameter (mm)1 - 20
Overall Length (mm)40 - 220
Flute Length (mm)3 - 125
Shank (mm)6 - 20

From £17.09 £14.24

View Products
3 Flute 45 Degree Helix Alu-Splitter TVC (Atorn)
3 Flute 45 Degree Helix Alu-Splitter TVC (Atorn)

The TVC end mills are optimally suited modern milling strategies such as dynamic, trochoidal
or high speed profile milling. Cutting edge lengths of 3.5xD, reinforced cores and specially
...

  • Roughing or finishing at cutting depths up to 3.5xD
  • Superior chip management at large depth of cut due to chip dividers
  • ULTRA-N PRO special smooth coating enables the longest tool life whilst maintaining an ultra-sharp cutting edge for non-ferrous machining
  • Edge protection chamfer prep
  • Designed for machining aluminium, plastic, brass, bronze and copper

Size

Diameter (mm)6 - 12
Overall Length (mm)62 - 93
Flute Length (mm)21 - 42
Shank (mm)6 - 12

From £67.07 £55.89

View Products
3 Flute 40 Degree Helix Alu-Splitter HPC IC (Atorn)
3 Flute 40 Degree Helix Alu-Splitter HPC IC (Atorn)

The Alu-Splitter IC features chip dividers on the front face, complimented by
internal coolant holes and uneven pitch. The unique geometry gives incredible performance and
chip managemen...

  • Roughing or finishing at cutting depths up to 2xD
  • Internal coolant
  • Superior chip management in all milling applications due to chip dividers on front face and flutes
  • High gloss polished flutes
  • Edge protection corner radius
  • Designed for machining aluminium, plastic, brass, bronze and copper

Size

Diameter (mm)4 - 16
Overall Length (mm)50 - 90
Flute Length (mm)12 - 32
Shank (mm)6 - 16

From £29.88 £24.90

View Products
3 Flute 45 Degree Helix Alu-Splitter TVC (Atorn)
3 Flute 45 Degree Helix Alu-Splitter TVC (Atorn)

The TVC end mills are optimally suited modern milling strategies such as dynamic, trochoidal
or high speed profile milling. Cutting edge lengths of 3.5xD, reinforced cores and specially
...

  • Roughing or finishing at cutting depths up to 3.5xD
  • Superior chip management at large depth of cut due to chip dividers
  • ULTRA-N PRO special smooth coating enables the longest tool life whilst maintaining an ultra-sharp cutting edge for non-ferrous machining
  • Edge protection chamfer prep
  • Designed for machining aluminium, plastic, brass, bronze and copper

Size

Diameter (mm)6 - 20
Overall Length (mm)62 - 126
Flute Length (mm)21 - 70
Shank (mm)6 - 20

From £68.84 £57.37

View Products
3 Flute Lapped 50 Degree Helix Carbide A+ Aluminium End Mill - APFE3 (Korloy)
3 Flute Lapped 50 Degree Helix Carbide A+ Aluminium End Mill - APFE3 (Korloy)

The Korloy APFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ rang...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • U-Shaped flute design for extreme quality surface finish.
  • Deep flute pockets prevent swarf clogging up the tool.
  • High rigidity on the cutting edge ensures high productivity.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.

    • Size

    Diameter (mm)2.5 - 20
    Overall Length (mm)50 - 100
    Flute Length (mm)8 - 45
    Shank (mm)6 - 20

    From £26.94 £22.45

    View Products
    3 Flute Lapped 50 Degree Helix Carbide Long Length A+ Aluminium End Mill - APLFE3 (Korloy)
    3 Flute Lapped 50 Degree Helix Carbide Long Length A+ Aluminium End Mill - APLFE3 (Korloy)

    The Korloy APLFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These long length end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • U-Shaped flute design for extreme quality surface finish.
  • Deep flute pockets prevent swarf clogging up the tool.
  • High rigidity on the cutting edge ensures high productivity.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)60 - 150
    Flute Length (mm)12 - 75
    Shank (mm)6 - 20

    From £29.65 £24.71

    View Products
    3 Flute Lapped 45 Degree Helix Carbide A+ Aluminium Ripper - APRE (Korloy)
    3 Flute Lapped 45 Degree Helix Carbide A+ Aluminium Ripper - APRE (Korloy)

    The Korloy APRE series A+ mirror finish aluminum cutter has 2 flutes and a plain shank. These roughers range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ range ...

  • Suitable for high speed roughing of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium..
  • Deep flute pockets prevent swarf clogging up the tool.
  • High rigidity on the cutting edge ensures high productivity.
  • Roughing geometry prevents built up edge.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.

    • Size

    Diameter (mm)4 - 25
    Overall Length (mm)50 - 105
    Flute Length (mm)8 - 50
    Shank (mm)6 - 25

    From £37.72 £31.43

    View Products
    3 Flute 45 Degree Helix Lapped Alu-Power Carbide Slot Drill - E5D70 (YG-1)
    3 Flute 45 Degree Helix Lapped Alu-Power Carbide Slot Drill - E5D70 (YG-1)

    The E5D70 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 3 flute cutters are ideal for mirror finish machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)1 - 20
    Overall Length (mm)40 - 150
    Flute Length (mm)3 - 75
    Shank (mm)6 - 20

    From £29.53 £24.61

    View Products
    3 Flute Alu-Power Carbide Wave-Cut Slot Drill - E5D74 (YG-1)
    3 Flute Alu-Power Carbide Wave-Cut Slot Drill - E5D74 (YG-1)

    The E5D74 series carbide Alu-Power cutters from YG-1 range from 6-20mm in diameter. These 3 flute cutters have reduced vibration and increased tool life due to the wave cutting edge geometry. These ar...

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Reduced vibration and increased tool life due to wave cutting edge.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.

    • Size

    Diameter (mm)6 - 20
    Overall Length (mm)70 - 120
    Flute Length (mm)13 - 38
    Shank (mm)6 - 20

    From £39.66 £33.05

    View Products
    3 Flute Lapped Alu-Power Carbide Chamfer Prep Reduced Neck Alu Pitch Rougher - E5E39 (YG-1)
    3 Flute Lapped Alu-Power Carbide Chamfer Prep Reduced Neck Alu Pitch Rougher - E5E39 (YG-1)

    The E5E39 series carbide Alu-Power rippers from YG-1 range from 6-20mm in diameter. These plain shank 3 flute rougher cutters have a reduced neck and an aluminium pitch to prevent built up edge. These...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Reduced neck diameter for deep pocket machining.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Aluminium pitch prevents built up edge.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)6 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)16 - 38
    Shank (mm)6 - 20

    From £41.40 £34.50

    View Products
    3 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E49 (YG-1)
    3 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E49 (YG-1)

    The E5E49 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 3 flute cutters are ideal for mirror finish machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 100
    Flute Length (mm)12 - 40
    Shank (mm)6 - 20

    From £23.14 £19.28

    View Products
    3 Flute Lapped Alu-Power Carbide Short Length Reduced Neck Slot Drill - E5E50 (YG-1)
    3 Flute Lapped Alu-Power Carbide Short Length Reduced Neck Slot Drill - E5E50 (YG-1)

    The E5E50 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 3 flute cutters are ideal for machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)8 - 41
    Shank (mm)6 - 20

    From £25.81 £21.51

    View Products
    3 Flute Lapped Alu-Power Carbide Reduced Neck Slot Drill - E5E83 (YG-1)
    3 Flute Lapped Alu-Power Carbide Reduced Neck Slot Drill - E5E83 (YG-1)

    The E5E83 series carbide Alu-Power cutters from YG-1 range from 1-12mm in diameter. These 3 flute cutters are ideal for machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)1 - 12
    Overall Length (mm)60 - 110
    Flute Length (mm)2.5 - 30
    Shank (mm)4 - 12

    From £34.04 £28.37

    View Products
    3 Flute Alu-Power HPC Lapped Carbide Reduced Neck Slot Drill - E5H23 (YG-1)
    3 Flute Alu-Power HPC Lapped Carbide Reduced Neck Slot Drill - E5H23 (YG-1)

    The E5H23 series features a reduced neck diameter to prevent interference with the workpiece. The LAPPED flutes are ideal for soft/sticky materials with low wear resistance. While other 3-flute end mi...

    • Micrograin carbide substrate
    • Deep flute pockets
    • Extreme metal removal rates
    • Polished flutes for excellent chip flow
    • Effective chip evacuation at high feed rates with lower cutting forces
    • Highly effective in vertical ramping up to 20 degrees and��step-over plunging applications
    • 3 flute ���centre match��� HPC geometry for high feed rates & large depth of cut
    • To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck)

    Size

    Diameter (mm)6 - 20
    Overall Length (mm)75 - 150
    Flute Length (mm)10 - 25
    Shank (mm)6 - 20

    From £42.47 £35.39

    View Products
    3 Flute Alu-Power HPC DLC Coated Carbide Slot Drill - JAH22 (YG-1)
    3 Flute Alu-Power HPC DLC Coated Carbide Slot Drill - JAH22 (YG-1)

    The JAH22 series is available in a choice of flute lengths. The polished DLC (diamond like carbon) coating protects against tool wear in hardwearing aluminium alloys or abrasive plastics. While other ...

    • Micrograin carbide substrate
    • Deep flute pockets
    • Extreme metal removal rates
    • Polished flutes for excellent chip flow
    • Effective chip evacuation at high feed rates with lower cutting forces
    • Highly effective in vertical ramping up to 20 degrees and��step-over plunging applications
    • 3 flute ���centre match��� HPC geometry for high feed rates & large depth of cut
    • DLC coating excels in hard aluminum and high speeds
    • To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck)

    Size

    Diameter (mm)3 - 25
    Overall Length (mm)52 - 150
    Flute Length (mm)8 - 80
    Shank (mm)6 - 25

    From £32.95 £27.46

    View Products
    3 Flute Alu-Power HPC DLC Coated Carbide Reduced Neck Slot Drill - JAH23 (YG-1)
    3 Flute Alu-Power HPC DLC Coated Carbide Reduced Neck Slot Drill - JAH23 (YG-1)

    The JAH23 series features a reduced neck diameter to prevent interference with the workpiece. The polished DLC (diamond like carbon) coating protects against tool wear in hardwearing aluminium alloys ...

    • Micrograin carbide substrate
    • Deep flute pockets
    • Extreme metal removal rates
    • Polished flutes for excellent chip flow
    • Effective chip evacuation at high feed rates with lower cutting forces
    • Highly effective in vertical ramping up to 20 degrees and��step-over plunging applications
    • 3 flute ���centre match��� HPC geometry for high feed rates & large depth of cut
    • DLC coating excels in hard aluminum and high speeds
    • To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck)

    Size

    Diameter (mm)6 - 20
    Overall Length (mm)75 - 150
    Flute Length (mm)10 - 25
    Shank (mm)6 - 20

    From £55.21 £46.01

    View Products