Call us 8am - 6pm 01924 869660

help Help
basket-added
cross Close Menu
Shop
Accounts
burger cross View Products Close Menu

Products

help Help
basket-added Basket

Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

BUY 2 BOXES GET 1 FREE ON TURNING, GROOVING & PARTING INSERTS   - VIEW NOW
HURRY... OFFER ENDS TODAY

Alu Power Ripper

Filter By arrow
carrat-down

3 Items

Sort By
carrat-down
sort-descending
3 Flute Alu-Power Carbide Chamfer Prep Plain Shank Alu Pitch Rougher - E5742 (YG-1)
3 Flute Alu-Power Carbide Chamfer Prep Plain Shank Alu Pitch Rougher - E5742 (YG-1)

The E5742 series carbide Alu-Power rippers from YG-1 range from 6-25mm in diameter. These plain shank 3 flute rougher cutters have an aluminium pitch to prevent built up edge. These are ideal for heav...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Aluminium pitch prevents built up edge.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)6 - 25
    Overall Length (mm)57 - 121
    Flute Length (mm)16 - 45
    Shank (mm)6 - 25

    From £34.50 £28.75

    View Products
    3 Flute Alu-Power Carbide Chamfer Prep Weldon Shank Alu Pitch Rougher - E5711 (YG-1)
    3 Flute Alu-Power Carbide Chamfer Prep Weldon Shank Alu Pitch Rougher - E5711 (YG-1)

    The E5711 series carbide Alu-Power rippers from YG-1 range from 6-25mm in diameter. These flat/weldon shank 3 flute rougher cutters have an aluminium pitch to prevent built up edge. These are ideal fo...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Aluminium pitch prevents built up edge.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)6 - 25
    Overall Length (mm)57 - 121
    Flute Length (mm)16 - 45
    Shank (mm)6 - 25

    From £34.50 £28.75

    View Products
    3 Flute Lapped Alu-Power Carbide Chamfer Prep Reduced Neck Alu Pitch Rougher - E5E39 (YG-1)
    3 Flute Lapped Alu-Power Carbide Chamfer Prep Reduced Neck Alu Pitch Rougher - E5E39 (YG-1)

    The E5E39 series carbide Alu-Power rippers from YG-1 range from 6-20mm in diameter. These plain shank 3 flute rougher cutters have a reduced neck and an aluminium pitch to prevent built up edge. These...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Reduced neck diameter for deep pocket machining.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Aluminium pitch prevents built up edge.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)6 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)16 - 38
    Shank (mm)6 - 20

    From £41.40 £34.50

    View Products