Call us 8am - 6pm 01924 869660

help Help
basket-added
cross Close Menu
Shop
Accounts
burger cross View Products Close Menu

Products

help Help
basket-added Basket

Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

BUY 2 BOXES GET 1 FREE ON TURNING, GROOVING & PARTING INSERTS   - VIEW NOW
HURRY... OFFER ENDS TODAY

Alu Power Square End

Filter By arrow
carrat-down

11 Items

Sort By
carrat-down
sort-descending
2 Flute Lapped Alu-Power Carbide Slot Drill - E5D71 (YG-1)
2 Flute Lapped Alu-Power Carbide Slot Drill - E5D71 (YG-1)

The E5D71 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 2 flute cutters have lapped flutes for exceptional surface finish and are ideal on Aluminium and Non-Ferrous m...

  • Suitable for high speed machining in aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Wide cut geometry, ideal for plastics such as ABS, acrylic and non-ferrous metals.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)1 - 20
    Overall Length (mm)50 - 110
    Flute Length (mm)3 - 55
    Shank (mm)6 - 20

    From £17.66 £14.72

    View Products
    2 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E48 (YG-1)
    2 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E48 (YG-1)

    The E5E48 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 2 flute cutters have lapped flutes for exceptional surface finish and are ideal on Aluminium and Non-Ferrous m...

  • Suitable for high speed machining in aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Wide cut geometry, ideal for plastics such as ABS, acrylic and non-ferrous metals.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)50 - 92
    Flute Length (mm)5 - 26
    Shank (mm)6 - 20

    From £11.86 £9.88

    View Products
    2 Flute 45 degree Helix Plain Shank Alu-Power Carbide Slot Drill - E5522 (YG-1)
    2 Flute 45 degree Helix Plain Shank Alu-Power Carbide Slot Drill - E5522 (YG-1)

    The E5522 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 2 flute cutters have improved surface finish and chip evacuation on Aluminium and Non-Ferrous materials....

  • Suitable for high speed machining in aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)8 - 38
    Shank (mm)6 - 20

    From £15.70 £13.08

    View Products
    2 Flute Weldon Shank Alu-Power Carbide Slot Drill - E5521 (YG-1)
    2 Flute Weldon Shank Alu-Power Carbide Slot Drill - E5521 (YG-1)

    The E5521 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 2 flute cutters come with a flat/weldon shank and have improved surface finish and chip evacuation on Aluminiu...

  • Suitable for high speed machining in aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)8 - 38
    Shank (mm)6 - 20

    From £15.70 £13.08

    View Products
    2 Flute Lapped Alu-Power Carbide Long Neck Slot Drill - E5E85 (YG-1)
    2 Flute Lapped Alu-Power Carbide Long Neck Slot Drill - E5E85 (YG-1)

    The E5E85 series carbide Alu-Power cutters from YG-1 range from 0.5-4mm in diameter. These 2 flute cutters have a long neck for deep pocket milling of Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Long neck design for deep pocket machining.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)0.5 - 4
    Overall Length (mm)45 - 80
    Flute Length (mm)1 - 8
    Shank (mm)4 - 6

    From £35.60 £29.67

    View Products
    3 Flute 45 Degree Helix Lapped Alu-Power Carbide Slot Drill - E5D70 (YG-1)
    3 Flute 45 Degree Helix Lapped Alu-Power Carbide Slot Drill - E5D70 (YG-1)

    The E5D70 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 3 flute cutters are ideal for mirror finish machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)1 - 20
    Overall Length (mm)40 - 150
    Flute Length (mm)3 - 75
    Shank (mm)6 - 20

    From £29.53 £24.61

    View Products
    3 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E49 (YG-1)
    3 Flute Lapped Alu-Power Carbide Short Length Slot Drill - E5E49 (YG-1)

    The E5E49 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 3 flute cutters are ideal for mirror finish machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 100
    Flute Length (mm)12 - 40
    Shank (mm)6 - 20

    From £23.14 £19.28

    View Products
    3 Flute Lapped Alu-Power Carbide Short Length Reduced Neck Slot Drill - E5E50 (YG-1)
    3 Flute Lapped Alu-Power Carbide Short Length Reduced Neck Slot Drill - E5E50 (YG-1)

    The E5E50 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 3 flute cutters are ideal for machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)8 - 41
    Shank (mm)6 - 20

    From £25.81 £21.51

    View Products
    3 Flute Lapped Alu-Power Carbide Reduced Neck Slot Drill - E5E83 (YG-1)
    3 Flute Lapped Alu-Power Carbide Reduced Neck Slot Drill - E5E83 (YG-1)

    The E5E83 series carbide Alu-Power cutters from YG-1 range from 1-12mm in diameter. These 3 flute cutters are ideal for machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)1 - 12
    Overall Length (mm)60 - 110
    Flute Length (mm)2.5 - 30
    Shank (mm)4 - 12

    From £34.04 £28.37

    View Products
    3 Flute Alu-Power Carbide Wave-Cut Slot Drill - E5D74 (YG-1)
    3 Flute Alu-Power Carbide Wave-Cut Slot Drill - E5D74 (YG-1)

    The E5D74 series carbide Alu-Power cutters from YG-1 range from 6-20mm in diameter. These 3 flute cutters have reduced vibration and increased tool life due to the wave cutting edge geometry. These ar...

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Reduced vibration and increased tool life due to wave cutting edge.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.

    • Size

    Diameter (mm)6 - 20
    Overall Length (mm)70 - 120
    Flute Length (mm)13 - 38
    Shank (mm)6 - 20

    From £39.66 £33.05

    View Products
    3 Flute Lapped Alu-Power Carbide Chamfer Prep Reduced Neck Alu Pitch Rougher - E5E39 (YG-1)
    3 Flute Lapped Alu-Power Carbide Chamfer Prep Reduced Neck Alu Pitch Rougher - E5E39 (YG-1)

    The E5E39 series carbide Alu-Power rippers from YG-1 range from 6-20mm in diameter. These plain shank 3 flute rougher cutters have a reduced neck and an aluminium pitch to prevent built up edge. These...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Reduced neck diameter for deep pocket machining.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Aluminium pitch prevents built up edge.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.

    • Size

    Diameter (mm)6 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)16 - 38
    Shank (mm)6 - 20

    From £41.40 £34.50

    View Products