5 Flute Fine Pitch Titanox Roughers - Titanox Milling Cutters - Milling Cutters

Shop By

In Stock

Diameter (mm)

Shank (mm)

Radius

Flute Length (mm)

Overall Length (mm)

Shank

Shank Type

Applicable Materials

5 Flute TitaNox Coated Carbide Corner Radius Fine Pitch Ripper Weldon Shank - EHE55 (YG-1)

5 Flute TitaNox Coated Carbide Corner Radius Fine Pitch Ripper Weldon Shank - EHE55 (YG-1)

The EHE55 series 40° helix fine pitch rippers range from 6-25mm diameter. These corner radius roughers have 5 flutes and a flat/weldon shank. The TitaNox Power range from YG-1 have exceptional tool l...

Extreme Machining of Titanium, Inconel, Hastelloy, Stainless Steel & Steels
HPC (High performance cutting)
Special roughing profile for stainless steel and titanium.
Optimized flute design for chip evacuation and rigidity when machining difficult-to-cut materials.
Special design for sticky materials prevents flutes from clogging in slotting operations
Special high heat resistant Y1200 coating
Micrograin carbide substrate
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck)

Size

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 121
Flute Length (mm)	16 - 45
Shank (mm)	6 - 25

From £63.98 £53.32

View Products

5 Flute TitaNox Coated Carbide Corner Radius Fine Pitch Ripper Plain Shank - EHE54 (YG-1)

5 Flute TitaNox Coated Carbide Corner Radius Fine Pitch Ripper Plain Shank - EHE54 (YG-1)

The EHE54 series 40° helix fine pitch rippers range from 6-25mm diameter. These corner radius roughers have 5 flutes and a plain shank. The TitaNox Power range from YG-1 have exceptional tool life on...

Extreme Machining of Titanium, Inconel, Hastelloy, Stainless Steel & Steels
HPC (High performance cutting)
Special roughing profile for stainless steel and titanium.
Optimized flute design for chip evacuation and rigidity when machining difficult-to-cut materials.
Special design for sticky materials prevents flutes from clogging in slotting operations
Special high heat resistant Y1200 coating
Micrograin carbide substrate
To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck)

Size

Diameter (mm)	6 - 25
Overall Length (mm)	57 - 121
Flute Length (mm)	16 - 45
Shank (mm)	6 - 25

From £63.98 £53.32

View Products