Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

3 Jaw Power Chucks

3 Jaw Power Chucks

Our range of 3 jaw power chucks from Chandox and Bison utilise a hydraulic clamping system for quicker and more consistent clamping of the workpiece compared with manual/scroll chucks.

Filter By arrow
carrat-down

6 Items

Sort By
carrat-down
sort-descending

The 2405-K-SGM series Bison 3 Jaw Power Chuck is manufactured from high grade alloy steel with hardened and ground working surfaces to ensure longer life with maintained accuracy and repeatability. Th...

  • Hollow (Open Centre) Power Chuck With Through Hole
  • 3 Jaw Chuck
  • Front Mount
  • Supplied with 1 Set of Soft Top Jaws
  • Interchangeable with Kitagawa B-200 Jaws
  • 60° Serration
  • Hydraulic clamping system
  • For quicker and more consistent clamping of the workpiece compared to manual/scroll chucks
  • Manufactured from high grade alloy steel for higher rigidity and wear resistance
  • Hardened and ground working surfaces for maintained accuracy and repeatability
  • Made by Bison Bial
  • All Adaptor plates and draw tube connectors can also be supplied depending on machine specification.

From £1,097.28 £914.40

Kitagawa BR series are high performance CNC power chucks with the highest accuracy. They have a run out of ...

  • HIGHER ACCURACY - Gripping accuracy of <0.01mm T.I.R. Immediatley after jaw forming.
  • IMPROVED REPEATABILITY - Gripping accuracy of <0.01mm T.I.R. or less immediately after reattaching jaws when using Kitagawa Tnut-Plus. No need to reform the jaws.
  • REDUCED JAW LIFT - Improves stability, especially in high speed turning. Tool life and surface finish can be improved compared to other 3 jaw chucks.
  • INTERCHANGEABLE - With Kitagawa B-200 and BB200 series chucks, old chucks can be easily replaced.
  • LARGE THROUGH HOLE - 53mm (6" Chuck), 66mm (8" Chuck), 81mm (10" Chuck) & 106mm (12" Chuck).
  • FIRST & SECOND OP MACHINING - Due to the high accuracy, can be used for rough and finish turning, even in high production turning environments.
  • STANDARD TYPE JAWS - Uses standard 60° X 1.5mm serration soft and hard jaws.

From £1,987.28 £1,656.07

Kitagawa N series are high precision CNC power chucks with a closed centre. They have a strong gripping force and high durability. It uses standard 60° 1.5mm serration soft and hard jaws....

  • Strong gripping force and high durability.
  • Closed centre standard chuck.
  • Uses standard 60° 1.5mm serration soft jaws.

From £1,006.72 £838.93

The 2405-K-ZW-SGM series Bison 3 Jaw Large Through Hole Power Chuck is manufactured from high grade alloy steel with hardened and ground working surfaces to ensure longer life with maintained accuracy...

  • Large Through Hole (Open Centre) Power Chuck
  • 3 Jaw Chuck
  • Front Mount
  • Supplied with 1 Set of Soft Top Jaws
  • Suitable for use with Kitagawa BB200 type jaws
  • 60° Serration
  • Hydraulic clamping system
  • For quicker and more consistent clamping of the workpiece compared to manual/scroll chucks
  • Large through hole allows clamp larger workpieces to be clamped further into the chuck for extra strong clamping at high speeds.
  • Manufactured from high grade alloy steel for higher rigidity and wear resistance
  • Hardened and ground working surfaces for maintained accuracy and repeatability
  • Made by Bison Bial
  • All Adaptor plates and draw tube connectors can also be supplied depending on machine specification.

From £1,193.28 £994.40

The 2305 series Bison 3 Jaw Quick Change Power Chuck can save you time and money by allowing you to replace the jaws in under 1 minute. These are supplied with master jaws and the operating key. All B...

  • Quick Change Power Chuck
  • 3 Jaw Chuck
  • Front Mount
  • Supplied with 1 Set of Master Jaws
  • Save time and money by replacing the jaws in under 1 minute!
  • Hydraulic clamping system
  • For quicker and more consistent clamping of the workpiece compared to manual/scroll chucks
  • Manufactured from high grade alloy steel for higher rigidity and wear resistance
  • Hardened and ground working surfaces for maintained accuracy and repeatability
  • Made by Bison Bial

From £3,021.12 £2,517.60

Kitagawa OJR series are high performance CNC power chucks with quick change jaws. You can save vital downtime compared to conventional power chuck by utilising the quick change jaw design. There is al...

  • QUICK CHANGE JAW DESIGN - Save vital downtime. Soft and hard jaws can be changed quickly and simply by removing the master jaws which are unlocked by a t-wrench.
  • COMPATIBLE JAWS - No need for special jaws, fully compatible with other Kitagawa chuck jaws with 60° serrations
  • INTERCHANGEABLE - With Kitagawa B-200 and BB200 series chucks, old chucks can be easily replaced.
  • LARGE THROUGH HOLE - 53mm (6" Chuck), 66mm (8" Chuck), 81mm (10" Chuck) & 106mm (12" Chuck).
  • FLEXIBLE - Suitable for small and large batch production.
  • INCLUDED - Supplied with t-wrench and 2 sets of base jaws.

From £5,896.00 £4,913.33