Mitutoyo Mechanical Outside Micrometers

3 Flute V-Anvil Micrometer - 114 Series (Mitutoyo)

This vernier V-Anvil micrometer measures the outside diameter of cutting tools (such as taps, reamers and end mills) which have three flutes and can also measure the pitch diameter of screw threads. I...

Range: up to 85mm
Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three flutes.
Can measure pitch diameter of screw threads.
Equipped with Ratchet Stop for constant measuring force.

From £352.09 £293.41

View Products

5 Flute V-Anvil Micrometer - 114 Series (Mitutoyo)

This vernier V-Anvil micrometer measures the outside diameter of cutting tools (such as taps, reamers and end mills) which have five flutes and can also measure the pitch diameter of screw threads. It...

Range: up to 25mm
Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have five flutes.
Can measure pitch diameter of screw threads.
Equipped with Ratchet Stop for constant measuring force.

From £406.02 £338.35

View Products

ABSOLUTE Digimatic High Accuracy Digital Micrometer - 293 Series (Mitutoyo)

This digital micrometer features a world-leading 0.1 μm resolution, making this micrometer ideal for highly accurate measurements with a hand-held tool. A highly rigid frame ensures stable measuremen...

Range: 0-1" (0-25.4mm)
Resolution: .000005" / .00002" (0.0001 / 0.0005mm) switchable
Accuracy:±.00002" (±0.5µm)
A world-leading 0.1 μm resolution makes this micrometer ideal for customers who need to make highly accurate measurements with a hand-held tool.
The High-Accuracy Digimatic Micrometer utilizes Mitutoyo’s innovative 0.1 μm resolution ABS (absolute) rotary sensor*1 and high-accuracy screw machining technology to reduce the instrumental error to ±0.5 μm, delivering higher accuracy without sacrificing operability.
A highly rigid frame and high-performance constant-force mechanism*1 enable more stable measurement, while the clicks emitted while the workpiece is being measured assure the operator that measurement is proceeding normally.
Transfer of body heat to the instrument is reduced by a (removable) heat shield, minimizing error caused by thermal expansion of the frame when performing handheld measurements.
The ABS sensor also eliminates the need to perform origin setting each time the power is turned on, letting you start measuring straight away. With no possibility of overspeed errors, this micrometer also delivers a higher level of reliability.
A range of features enables flexible measurement, including switchable resolution (0.0001/0.0005 mm), function lock and preset.

From £2,126.78 £1,772.32

View Products

ABSOLUTE QuantuMike Digimatic IP65 Digital Micrometer - 293 Series (Mitutoyo)

This digital micrometer ensures faster measurement is achieved by using a coarser thread which feeds the spindle by 2mm per revolution of the thimble. This model has SPC data output. Mitutoyo are a ma...

Range: up to 4" (101.6mm)
Resolution: .00005" (0.001mm)
Faster measurement is achieved by using a coarser thread which feeds the spindle by 2mm per revolution of the thimble.
This increase in thread lead has been made possible thanks to new high precision thread-cutting and testing techniques.
A graduated scale is provided on the sleeve for use with a reference mark on the thimble so that every millimetre displacement can be checked to provide extra confidence.
Excellent resistance against oil, water and dust (IP65 protection level) enables this product to be used in machining situations that include splashing coolant fluid.
QuantuMike is equipped with a function lock feature to prevent the origin point being moved by mistake during measurement.
Measuring faces: Carbide.

From £328.68 £273.90

View Products

ABSOLUTE QuantuMike Digimatic IP65 Digital Micrometer With Data Output - 293 Series (Mitutoyo)

This digital micrometer ensures faster measurement is achieved by using a coarser thread which feeds the spindle by 2mm per revolution of the thimble. This model has SPC data output. Mitutoyo are a ma...

Range: up to 4" (101.6mm)
Resolution: .00005" (0.001mm)
Faster measurement is achieved by using a coarser thread which feeds the spindle by 2mm per revolution of the thimble.
This increase in thread lead has been made possible thanks to new high precision thread-cutting and testing techniques.
Data output allow easy incorporation of this instrument into a statistical process control or measurement system.
A graduated scale is provided on the sleeve for use with a reference mark on the thimble so that every millimetre displacement can be checked to provide extra confidence.
Excellent resistance against oil, water and dust (IP65 protection level) enables this product to be used in machining situations that include splashing coolant fluid.
QuantuMike is equipped with a function lock feature to prevent the origin point being moved by mistake during measurement.
Measuring faces: Carbide.

From £398.77 £332.31

View Products

Anvil Extension Collar Micrometer - 105 Series (Mitutoyo)

This vernier micrometer has a wide measuring range with anvil extension collars and is equipped with a ratchet stop to ensure a constant measuring force. Mitutoyo are a market leader in the measuring ...

Range: up to 2000mm (80")
Accuracy: ±.0003
Wide measuring range with anvil extension collars.
50 mm spindle stroke.
Measuring faces: Carbide.
Equipped with Ratchet Stop for constant measuring force.

From £1,272.00 £1,060.00

View Products

Blade Micrometer - 122 Series (Mitutoyo)

This vernier blade micrometer has blade-shaped anvils and spindles for measuring the groove diameter of shafts, keyways and other hard-to-reach features. It is equippd with a ratchet stop to provide a...

Range: up to 300mm/4"
Suited to the measurement of low-volume manufactured parts.
Easy to use when operating one-handed due to retractable anvil.
In the 25 mm measuring range, models are available that offer left or right positioning of the anvil-retraction button.
Water resistant to protection level IP54.
Greatly improved accuracy: indication error and graduation of 1 μm.
Hard-coated crystal: enhanced oil and scratch resistance.
Indicator scale is large and easy-to-read.
Easily set zero position and adjustable limit markers for GO/±NG testing.
Measuring faces: Carbide.

From £222.85 £185.71

View Products

Caliper Anvil Micrometer - 143 Series (Mitutoyo)

This vernier micrometer is effective for measuring workpieces where access is difficult. It has carbide measuring faces and equipped with a ratchet stop for constant measuring force. Mitutoyo are a ma...

Range: up to 300mm
Graduation: 0.01mm
Effective for measuring workpiece features where access is difficult.
Measuring faces: Carbide.
Equipped with Ratchet Stop for constant measuring force.

From £296.12 £246.77

View Products

Can Seam Micrometer - 147 Series (Mitutoyo)

This can seam micrometer measures the width, height and depth of can seams. Mitutoyo are a market leader in the measuring sector, providing the highest quality measuring tools for a range of applicati...

Range:up to 13mm (.5")
Measures the width, height and depth of can seams.
Available for either aluminium, steel or spray cans.
Metric or imperial measurements (Range: 0-13mm or 0-5").
Accuracy: ±3 µm or ±.00015".

From £158.75 £132.29

View Products

Crimp Height Micrometer - 112 Series (Mitutoyo)

This vernier crimp height micrometer is designed to measure the height of crimp contacts. It is equippd with a ratchet stop to provide a constant measuring force. Mitutoyo are a market leader in the m...

Range: 0-25mm
Graduation: 0.01mm
Accuracy: ±3µm
Measures the height of crimp contacts.
Equipped with Ratchet Stop for constant measuring force.

From £204.54 £170.45

View Products

Cylindrical/Spherical Anvil Tube Micrometer - 115 Series (Mitutoyo)

This vernier cylindrical/spherical anvil tube micrometer has a choice of either spherical or cylindrical anvils. It is equippd with a ratchet stop to provide a constant measuring force. Mitutoyo are a...

Range: up to 50mm
Graduation: 0.01mm
Accuracy: ±2µm
Spindle face: Carbide.
Equipped with Ratchet Stop for constant measuring force.

From £114.98 £95.82

View Products

Digimatic Blade Digital Micrometer - 422 Series (Mitutoyo)

This digital blade micrometer have blade-shaped anvils and spindles for measuring the groove diameter of shafts, keyways and other hard-to-reach features. It is equippd with a ratchet stop to provide ...

Range: up to 4" (101.6mm)
Resolution: .00005" (0.001mm)
The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
Equipped with Ratchet Stop for constant measuring force.
Four types of blade shape are available (see diagrams below). Types C and D have carbide-tipped measuring faces.

From £820.19 £683.49

View Products

Digimatic Caliper Anvil Digital Micrometer - 343 Series (Mitutoyo)

This vernier micrometer is effective for measuring workpieces where access is difficult. It has carbide measuring faces and equipped with a ratchet stop for constant measuring force. Mitutoyo are a ma...

Range: up to 4" (101.6mm)
Resolution: .00005" (0.001mm)
Effective for measuring workpiece features where access is difficult.
Measuring faces: Carbide.
Equipped with Ratchet Stop for constant measuring force.

From £715.37 £596.14

View Products

Digimatic Digital Micrometer - 293 Series (Mitutoyo)

This digital micrometer has a simple design to achieve an economical cost. It has increased operability thanks to an easy-to-read LCD with 30% more character display area than previous models. Mitutoy...

Range:up to 1" (25.4mm)
Resolution: 0.001mm
Accuracy: ±2µm
Simple design, such as not incorporating data output, achieves low cost.
Provided only with an origin-set button for easy origin setting.
Increased operability thanks to easy-to-read LCD with 30% more character display area than previous model.
Equipped with Ratchet Stop for constant measuring force.
Measuring faces: Carbide.

From £170.95 £142.46

View Products

Digimatic IP65 Crimp Height Digital Micrometer - 342 Series (Mitutoyo)

This digital crimp height micrometer is designed to measure the height of crimp contacts and is IP65 rated dust and waterproof. It is equippd with a ratchet stop to provide a constant measuring force....

Range: 0-.8" (0-20.32mm)
Resolution: 0.001mm (.00005")
Accuracy: ±3µm (±.00015")
Measures the height of crimp contacts.
Equipped with Ratchet Stop for constant measuring force.
342 series: Digimatic type IP65 rated.

From £549.50 £457.92

View Products

Digimatic IP65 Cylindrical/Spherical Anvil Tube Digital Micrometer - 395 Series (Mitutoyo)

This digital cylindrical/spherical anvil tube micrometer has IP65 protection to ensure constant high performance in any machining conditions. This model has a choice of either spherical or cylindrical...

Range: 0-1" (0-25.4mm)
Resolution: .00005" (0.001mm)
Accuracy: ±2µm
Spindle face: Carbide.
395 series: Digimatic type IP65 rated with a choice of spherical or cylindrical anvils.
Equipped with Ratchet Stop for constant measuring force.

From £460.97 £384.14

View Products

Digimatic IP65 Digital Micrometer With Data Output - 293 Series (Mitutoyo)

This digital micrometer is based on a new waterproof structual technology, providing IP65 protection levels. SPC data output function available with a water-resistant data cable. Mitutoyo are a market...

Range: up to 100mm (12")
Based on new waterproof structural technology, this micrometer provides IP65 protection levels, enabling use in environments that include cutting oil, etc.
±1 μm instrumental error (75 mm / 3" or less measuring range models).
Measuring data output function is available with a water-resistant data cable to maintain the IP65 protection level.
Oil-resistant materials are used in all plastic components.
Auto power ON/OFF function.
Further-Increased operability thanks to easy-to-read LCD with 30% more character area.
Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system.
Interface Input Tools are available that enable the conversion of measurement data to keyboard signals
that are then directly input to cells in off-the-shelf spreadsheet software such as Excel.
Two types of constant-force devices are available: Ratchet Stop and Ratchet Thimble.
Measuring faces: Carbide.

From £252.88 £210.73

View Products

Digimatic IP65 Digital Point Micrometer - 342 Series (Mitutoyo)

This digital point micrometer has a pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways and other hard-to-reach features. It is equippd with a ratchet stop to p...

Range: up to 4" (101.6mm)
Resolution:.00005" (0.001mm)
Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach features.
The measuring points (carbide tipped) have, approximately, a 0.3 mm radius.
Equipped with Ratchet Stop for constant measuring force.

From £515.93 £429.94

View Products

Digimatic IP65 Digital Spline Micrometer - 331 Series (Mitutoyo)

This digital spline micrometer has small diameter anvils and spindles for measuring splined shafts, slots and keyways. It is equippd with a ratchet stop to provide a constant measuring force. Mitutoyo...

Range: up to 4" (101.6mm)
Resolution: .00005" (0.001mm)
The anvil and spindle are of small diameter for measuring splined shafts, slots, and keyways.
Measuring faces: Carbide.
Equipped with Ratchet Stop for constant measuring force.

From £528.13 £440.11

View Products

Digimatic IP65 Disc Digital Micrometer - 323 Series (Mitutoyo)

This digital disk micrometer can be used for making root tangent measurements on spur and helical geals. It is equipped with a ratchet stop to provide a constant measuring force. Mitutoyo are a market...

Range: up to 4" (101.6mm)
Resolution:.00005" (0.001mm)
Can be used for making root tangent measurements on spur gears and helical gears.
Equipped with Ratchet Stop for constant measuring force.
Supplied with a setting standard (except for 0 - 25 mm / 0 - 1" measuring range).

From £632.95 £527.46

View Products

Digimatic IP65 Interchangeable Anvil Digital Micrometer - 340 Series (Mitutoyo)

This digital micrometer has a wide measuring range with interchangeable anvils. It has IP65 dust and waterproof protection and has a carbide tipped measuring face. Mitutoyo are a market leader in the ...

Range: up to 12" (304.8mm)
Wide measuring range with interchangeable anvils.
Measuring face of the spindle is carbide tipped (standard model).
IP65 water/dust protection.
Equipped with Ratchet Stop for constant measuring force.

From £810.01 £675.01

View Products

Digimatic IP65 Interchangeable Anvil Screw Thread Digital Micrometer - 326 Series (Mitutoyo)

This digital micrometer has interchangeable anvils and spindle tips to enable measurement of metric, unified and whitworth threads using 1 micrometer. Direct reading of the screw pitch diameter is ach...

Range: up to 4" (101.6mm)
Resolution: .00005" (0.001mm)
Anvils and spindle tips are interchangeable in matching pairs to enable measurement of Metric/Unified or Whitworth threads.
Direct reading of screw pitch diameter (no need for calculation).
Equipped with Ratchet Stop for constant measuring force.
Interchangeable anvils/spindle tips are optional.

From £673.66 £561.38

View Products

Digimatic IP65 Spherical Anvil and Spindle Tube Digital Micrometer - 395 Series (Mitutoyo)

This digital spherical anvil and tube micrometer is designed to measure workpieces with concave-concave surfaces such as the race-wall thickness of antifriction bearings. It is equippd with a ratchet ...

Range: up to 4" (101.6mm)
Resolution: .00005" (0.001mm)
Designed to measure workpieces with concave-concave surfaces such as the race-wall thickness of antifriction bearings.
Measuring faces: Carbide (115-201: only the spindle is carbide tipped).
395 series: Digimatic type IP65 rated with spherical anvil and spindle.
Equipped with Ratchet Stop for constant measuring force.

From £514.91 £429.09

View Products

Digimatic IP65 Tube Digital Micrometer - 395 Series (Mitutoyo)

This digital iP65 duse & waterproof tube micrometer is designed to measure workpieces with concave-convex surfaces such as wall thickness of tubes and pipes. It is equipped with a ratchet stop to prov...

Range: up to 4" (101.6mm)
Resolution: .0005" (0.001mm)
Designed to measure workpieces with concave-convex surfaces such as the wall thickness of tubes and pipes.
Measuring faces: Carbide (115-101: only the spindle is carbide tipped).
395 series: IP65 digital spherical-flat anvil type micrometer.
Equipped with Ratchet Stop for constant measuring force.

From £473.18 £394.32

View Products

Digimatic IP65 Uni-Mike Interchangeable Anvil Digital Micrometer - 317 Series (Mitutoyo)

This digital uni-mike interchangeable anvil micrometer is for measuring tubing thickness, shoulder-edge distance, rivit head height etc. using interchangeable anvils. It has IP65 dust and waterproof p...

Range: up to 50mm (2")
Resolution:0.001mm (.00005")
Accuracy: ±4µm (±.0002")
Measures tubing thickness, shoulder-edge distance, rivet head height, etc., with interchangeable anvils (flat anvil, rod anvil, V-anvil).
IP65 water/dust protection (317 series).

From £532.20 £443.50

View Products