i-X Mill Copy Milling Inserts | Cutwel - Milling Tool Specialist

i-X Mill Ball Nose High Hardened Steel Indexable Milling Insert - XMB26 Series (YG-1)

i-X Mill Ball Nose High Hardened Steel Indexable Milling Insert - XMB26 Series (YG-1)

The YG-1 XMB26 series i-X Mill ball nose copy milling insert has a special geometry and coating ideal for use on carbon steels, alloy steels, tool steels, high hardened steels ...

Ball nose geometry.
High hardened steel grade for use on or use on carbon steels, alloy steels, tool steels, high hardened steels
Insert diameters available from 8mm to 33mm.
Strongest cutting edge and ultrafine micrograin carbide substrate for machining high hardened steels.
Excellent toool life, surface finish and chip control.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 33

From £25.26 £21.05

View Products

i-X Mill DLC Coated Ball Nose Non-Ferrous Indexable Milling Insert - XMB11D Series (YG-1)

i-X Mill DLC Coated Ball Nose Non-Ferrous Indexable Milling Insert - XMB11D Series (YG-1)

The YG-1 XMB11D series i-X Mill ball nose copy milling insert has a special geometry and DLC coating specifically for use on aluminium and graphite. The i-Xmill Indexable Milling system is a high prec...

Ball nose geometry.
Special DLC coating specifically designed for graphite, aluminium, plastic and abrasive non-ferrous materials.
Insert diameters available from 8mm to 33mm.
DLC coating (Diamond-like carbon) has exceptional wear resistance in abrasive materials such as graphite, high-silicon aluminium and plastics.
Long tool life and high quality surface finish can be achieved.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 33

From £57.08 £47.57

View Products

i-X Mill Corner Radius High Hardness Steel Indexable Milling Insert - XMR26 Series (YG-1)

i-X Mill Corner Radius High Hardness Steel Indexable Milling Insert - XMR26 Series (YG-1)

The YG-1 XMR26 series i-X Mill corner radius copy milling insert has a special geometry and coating ideal for use on carbon steels, alloy steels, tool steels, high hardened steels ...

Corner radius geometry.
General purpose grade for use on carbon steels, alloy steels, tool steels, high hardened steels
Insert diameters available from 8mm to 32mm.
Special coating for longer lasting cutting of high hardened steels.
Wide range of corner radius' available from 0.3mm to 3.2mm.
Optimum geometry for better reliability with less vibration and cutting load.
Inserts for roughing and finishing a wide range of materials.
Can be used with the ball holder, but for higher precision machining use the corner radius holder.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 32

From £28.04 £23.37

View Products

i-X Mill Ball Nose General Purpose Indexable Milling Insert - XMB11A Series (YG-1)

i-X Mill Ball Nose General Purpose Indexable Milling Insert - XMB11A Series (YG-1)

The YG-1 XMB11A series i-X Mill ball nose copy milling insert has a special geometry and coating ideal for use on carbon steels, alloy steels, tool steels and hardened steels ...

Ball nose geometry.
General purpose grade for use on carbon steels, alloy steels, tool steels and hardened steels
Insert diameters available from 8mm to 33mm.
Medium sharp cutting edge, ideal for softer and longer chip steels.
Excellent chip control.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 33

From £25.26 £21.05

View Products

i-X Mill Ball Nose Pre-Hardened Steel Indexable Milling Insert - XMB12 Series (YG-1)

i-X Mill Ball Nose Pre-Hardened Steel Indexable Milling Insert - XMB12 Series (YG-1)

The YG-1 XMB12 series i-X Mill ball nose copy milling insert has a special geometry and coating ideal for use on carbon steels, alloy steels, tool steels, hardened steels and cast iron. The i-Xmill In...

Ball nose geometry.
Pre-hardened steel grade for use on or use on carbon steels, alloy steels, tool steels, hardened steels and cast iron.
Insert diameters available from 8mm to 33mm.
Stronger cutting edge, ideal for machining tool and die steels.
Excellent toool life, surface finish and chip control.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 32

From £25.26 £21.05

View Products

i-X Mill Ball Nose Stainless Steel Indexable Milling Insert - XMB13 Series (YG-1)

i-X Mill Ball Nose Stainless Steel Indexable Milling Insert - XMB13 Series (YG-1)

The YG-1 XMB26 series i-X Mill ball nose copy milling insert has a special geometry with web thinning designed specifically for stainless steel materials. The i-Xmill Indexable Milling system is a hig...

Ball nose geometry.
Inserts are designed with web thinning specifically for stainless steel machining.
Insert diameters available from 8mm to 33mm.
Specifically designed cutting edge with web-thinning is ideal for machining stainless steel even at extra small cut depths without causing work hardening.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 33

From £25.26 £21.05

View Products

i-X Mill Ball Nose 220° Full Radius General Purpose Indexable Milling Insert - XMM11 Series (YG-1)

i-X Mill Ball Nose 220° Full Radius General Purpose Indexable Milling Insert - XMM11 Series (YG-1)

The YG-1 XMM11 series i-X Mill ball nose copy milling insert has a special 220° full radius geometry for 5 axis machining of carbon steels, alloy steels, tool steels and stainless steels. The i-Xmill...

Ball nose geometry.
220 degree full radius inserts ideal for machining carbon steels, alloy steels, tool steels and stainless steels.
Insert diameters available from 8mm to 33mm.
Full radius insert for complex 5 axis machining or creating an undercut in mould and die machining.
Excellent tool life and chip control.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 33

From £25.26 £21.05

View Products

i-X Mill Corner Radius General Purpose Indexable Milling Insert - XMR12 Series (YG-1)

i-X Mill Corner Radius General Purpose Indexable Milling Insert - XMR12 Series (YG-1)

The YG-1 XMR12 series i-X Mill corner radius copy milling insert has a special geometry and coating ideal for use on carbon steels, alloy steels, tool steels, high hardened steels ...

Corner radius geometry.
General purpose grade for use on carbon steels, alloy steels, tool steels, high hardened steels
Insert diameters available from 8mm to 32mm.
Wide range of corner radius' available from 0.3mm to 3.2mm.
Optimum geometry for better reliability with less vibration and cutting load.
Inserts for roughing and finishing a wide range of materials.
Can be used with the ball holder, but for higher precision machining use the corner radius holder.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 32

From £28.04 £23.37

View Products

i-X Mill Corner Radius High Feed General Purpose Indexable Milling Insert - XMF11 Series (YG-1)

i-X Mill Corner Radius High Feed General Purpose Indexable Milling Insert - XMF11 Series (YG-1)

The YG-1 XMF11 series i-X Mill corner radius copy milling insert has a high feed geometry that can achieve up to feed rates of 7 meters/minutes on carbon steels, alloy steels and tool steels. The i-Xm...

Corner radius geometry.
General purpose grade for use on carbon steels, alloy steels, tool steels, high hardened steels
Insert diameters available from 8mm to 32mm.
Feed rates over 7 metres/minute can be achieved.
When combined with dedicated high feed holders, better results are possible.
Ideal for high performance roughing and finishing.
Optimum geometry for better reliability with less vibration and cutting load.
Inserts for roughing and finishing a wide range of materials.
Can be used with the ball holder, but for higher precision machining use the corner radius holder.
Solid carbide substrate for great wear resistance.
Each insert geometry is specially designed for machining different materials.

Size

Diameter (mm)	8 - 32

From £28.04 £23.37

View Products

i-X Mill Inserts