HRM Double High Feed Milling Bodies | Cutwel - Milling Tool Specialist Cutwel Ltd

The Smoxh WNMX 90 degree face mill style milling body takes WNMX09T3 ISO inserts. Diameters range from 40-66mm and these are suitable for face milling, shoulder milling, slotting, ramping, helical cut...

Face Mill Style.
High feed , face milling with ISO inserts.
High rake angle provides low cutting resistance and smooth chip flow.
Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
Holders &, inserts compatible with other manufacturers tools.
Low cost insert and holders.
Perfect tool for low cost but high feed machining.
Suitable for use with Korloy , HRM-D Double inserts.

From £107.30 £89.42

View Products

WNMX 90° Face Mill - HRMD-EM (Smoxh)

The Smoxh WNMX 90 degree end mill style milling body takes WNMX09T3 ISO inserts. Diameters range from 25-40mm and these are suitable for face milling, shoulder milling, slotting, ramping, helical cutt...

End Mill Style.
High feed , face milling with ISO inserts.
High rake angle provides low cutting resistance and smooth chip flow.
Insert grades for steel, stainless steel, cast iron and exotics.
Holders &, inserts compatible with other manufacturers tools.
Low cost insert and holders.
Perfect tool for low cost high feed machining.
Suitable for use with Korloy , HRM-D Double inserts.

From £84.19 £70.16

View Products

HRM Double High Feed End Mill for WNMX Inserts - HRMD-EM (Korloy)

The Korloy HRMD-FM series HRM Double is a high feed end mill style milling body that takes WNMX inserts. Diameters range from 16-63mm and these are suitable for copy milling, ramping, slotting, should...

Double sided inserts with 6 cutting edges
Ultra high metal removal rates
WNMX06, WNMX09 & WNMX13 insert sizes
For high performance machining of stainless steel, exotics, cast iron, steels and hardened steels <HRc60
Double sided insert gives 6 usable cutting edges
High rake angle cutting edge and chip breaker reduces cutting load
Negative geometry designed for high rigidity of cutting edge
Simple screw on system & stable support gives strong clamping force

From £130.10 £108.42

View Products

HRM Double High Feed Screwed Shank End Mill for WNMX Inserts - HRMD-SEM (Korloy)

The Korloy HRMD-FM series HRM Double is a high feed screwed shank end mill style milling body that takes WNMX inserts. Diameters range from 16-40mm and these are suitable for copy milling, ramping, sl...

Double sided inserts with 6 cutting edges
Ultra high metal removal rates
WNMX06, WNMX09 & WNMX13 insert sizes
For high performance machining of stainless steel, exotics, cast iron, steels and hardened steels <HRc60
Double sided insert gives 6 usable cutting edges
High rake angle cutting edge and chip breaker reduces cutting load
Negative geometry designed for high rigidity of cutting edge
Simple screw on system & stable support gives strong clamping force

From £161.64 £134.70

View Products

HRM Double High Feed Face Mill for WNMX Inserts - HRMD-FM (Korloy)

The Korloy HRMD-FM series HRM Double is a high feed face mill style milling body that takes WNMX inserts. Diameters range from 16-40mm and these are suitable for copy milling, ramping, slotting, shoul...

Double sided inserts with 6 cutting edges
Ultra high metal removal rates
WNMX09, WNMX13 & WNMX16 insert sizes
For high performance machining of stainless steel, exotics, cast iron, steels and hardened steels <HRc60
Double sided insert gives 6 usable cutting edges
High rake angle cutting edge and chip breaker reduces cutting load
Negative geometry designed for high rigidity of cutting edge
Simple screw on system & stable support gives strong clamping force

From £192.89 £160.74

View Products