• Free Delivery on Orders Over £75 ex vat*
    *View Terms & Conditions

  • The BEST Technical Advice in the Industry
    Call Our Tech Team on 01924 869 615

HSS Milling Cutters

For economic machining of carbon steels, alloy steels up to HRc40, copper, brass, aluminium and cast iron.

HSS Milling Cutters

For economic machining of carbon steels, alloy steels up to HRc40, copper, brass, aluminium and cast iron.

General purpose high speed steel milling cutters for low cost general machining

 

  • 1st choice for low cost general machining of Steel <HRc40
  • Superhardened HSS & HSS 8% Cobalt substrates offer improved tool life & performance over HSS/HSSE
  • Available in coated or uncoated
  • Also suitable for copper and aluminium
  • Wide range of lengths and diameters available

Showing 1-25 of 28

Page
Set Descending Direction
  1. 2 Flute Ball Nose Uncoated HSS 8 Percent Cobalt HSS Long Length Slot Drill - E2492 (YG-1)
    2 Flute Ball Nose Uncoated HSS 8 Percent Cobalt HSS Long Length Slot Drill - E2492 (YG-1)
    The YG-1 E2492 series HSS Milling Cutter has 2 flutes and a weldon shank. These ball nose slot drills range in diameter from 2-30mm. The HSS 8% Cobalt Substrate provides exceptional value and tool lif ... read more >

    Exceptional value and tool life.
    Available with a weldon shank.
    Ball Nose end profile to produce radii on components.
    Wide ra ... read more >
    • P
    • N

    Starting at £12.89 £10.74

    View Products E2492
  2. 1 Flute Router Style Uncoated HSS 5% Cobalt Slot Drill Without Neck - EL612 (YG-1)
    1 Flute Router Style Uncoated HSS 5% Cobalt Slot Drill Without Neck - EL612 (YG-1)
    The YG-1 EL612 series are a router style milling cutter with a single flute. The 1 flute design helps prevent the clogging of swarf which becomes more common in non-ferrous machining. Ideal for soft s ... read more >

    Exceptional value and tool life.
    Single flute for the prevention of chip clogging
    Alu-Cut geomotry makes this cutter ideal for non- ... read more >
    • P
    • N

    Starting at £12.65 £10.54

    View Products EL612
  3. 1 Flute Router Style Uncoated HSS 5% Cobalt Slot Drill With Neck - EL6129 (YG-1)
    1 Flute Router Style Uncoated HSS 5% Cobalt Slot Drill With Neck - EL6129 (YG-1)
    The YG-1 EL6129 series are a router style milling cutter with a single flute. The 1 flute design helps prevent the clogging of swarf which becomes more common in non-ferrous machining. Ideal for soft ... read more >

    Exceptional value and tool life.
    Single flute for the prevention of chip clogging
    Alu-Cut geomotry makes this cutter ideal for non- ... read more >
    • P
    • N

    Starting at £12.50 £10.42

    View Products EL6129
  4. 3-6 Flute TiAlN Coated Premium Superhard HSS Long Length Fine Pitch Rougher - EHC762 (YG-1)
    3-6 Flute TiAlN Coated Premium Superhard HSS Long Length Fine Pitch Rougher - EHC762 (YG-1)
    The YG-1 EHC762 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a fine roughing profile. The TiALN coated Super Hardened Premium ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £17.11 £14.26

    View Products EHC762
  5. 3-6 Flute Uncoated Premium Superhard HSS Long Length Fine Pitch Rougher - ESH762 (YG-1)
    3-6 Flute Uncoated Premium Superhard HSS Long Length Fine Pitch Rougher - ESH762 (YG-1)
    The YG-1 ESH762 series Premium HSS Milling Cutter has 4 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a fine roughing profile. The Super Hardened Premium HSS Substrate ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £16.07 £13.39

    View Products ESH762
  6. 3-5 Flute K2 Coated HSS 8% Cobalt Fine Pitch Rougher - GB753 (YG-1)
    3-5 Flute K2 Coated HSS 8% Cobalt Fine Pitch Rougher - GB753 (YG-1)
    The YG-1 GB753 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These rippers range in diameter from 6-25mm and has a fine roughing profile. The K2 coated HSS 8% Cobalt Substrate pro ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £24.71 £20.59

    View Products GB753
  7. 3-6 Flute TiAlN Coated Premium Superhard HSS Fine Pitch Rougher - EHC753 (YG-1)
    3-6 Flute TiAlN Coated Premium Superhard HSS Fine Pitch Rougher - EHC753 (YG-1)
    The YG-1 EHC753 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a fine roughing profile. The TiALN coated Super Hardened Premium ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £14.82 £12.35

    View Products EHC753
  8. 3-6 Flute Uncoated Premium Superhard HSS Fine Pitch Rougher - ESH753 (YG-1)
    3-6 Flute Uncoated Premium Superhard HSS Fine Pitch Rougher - ESH753 (YG-1)
    The YG-1 ESH753 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a fine roughing profile. The Super Hardened Premium HSS Substrate ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £12.48 £10.40

    View Products ESH753
  9. 3-6 Flute TiAlN Coated Premium HSS Long Length Coarse Pitch Rougher - EHC752 (YG-1)
    3-6 Flute TiAlN Coated Premium HSS Long Length Coarse Pitch Rougher - EHC752 (YG-1)
    The YG-1 EHC752 series Premium HSS Milling Cutter has 4 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a coarse roughing profile. The TiALN coated Super Hardened HSS 8% ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £16.90 £14.08

    View Products EHC752
  10. 3-6 Flute Uncoated Premium Superhard HSS Long Length Coarse Pitch Rougher - ESH752 (YG-1)
    3-6 Flute Uncoated Premium Superhard HSS Long Length Coarse Pitch Rougher - ESH752 (YG-1)
    The YG-1 ESH752 series Premium HSS Milling Cutter has 4 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a coarse roughing profile. The Super Hardened Premium HSS Substra ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £16.07 £13.39

    View Products ESH752
  11. 3-6 Flute TiAlN Coated Premium Superhard HSS Coarse Pitch Rougher - EHC751 (YG-1)
    3-6 Flute TiAlN Coated Premium Superhard HSS Coarse Pitch Rougher - EHC751 (YG-1)
    The YG-1 EHC751 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a coarse roughing profile. The TiALN Super Hardened Premium HSS S ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £13.73 £11.44

    View Products EHC751
  12. 3-6 Flute Uncoated Premium Superhard HSS Coarse Pitch Rougher - ESH751 (YG-1)
    3-6 Flute Uncoated Premium Superhard HSS Coarse Pitch Rougher - ESH751 (YG-1)
    The YG-1 ESH751 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These rippers range in diameter from 6-32mm and has a coarse roughing profile. The Super Hardened Premium HSS Substra ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £12.48 £10.40

    View Products ESH751
  13. 2 Flute Ball Nose TiAlN Coated Premium Superhard HSS Slot Drill - EHC535 (YG-1)
    2 Flute Ball Nose TiAlN Coated Premium Superhard HSS Slot Drill - EHC535 (YG-1)
    The YG-1 EHC535 series Premium HSS Milling Cutter has 2 flutes and a weldon shank. These slot drills range in diameter from 2-25mm and these have a ball nose radius on the end. The TiALN coated Super ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £8.74 £7.28

    View Products EHC535
  14. 2 Flute Ball Nose Uncoated Premium Superhard HSS Slot Drill - ESH535 (YG-1)
    2 Flute Ball Nose Uncoated Premium Superhard HSS Slot Drill - ESH535 (YG-1)
    The YG-1 ESH535 series Premium HSS Milling Cutter has 2 flutes and a weldon shank. These slot drills range in diameter from 2-25mm and these have a ball nose radius on the end. The Premium HSS Substra ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £6.68 £5.57

    View Products ESH535
  15. 4&6 Flute TiAlN Coated Premium Superhard HSS End Mill - EHC597/8 (YG-1)
    4&6 Flute TiAlN Coated Premium Superhard HSS End Mill - EHC597/8 (YG-1)
    The YG-1 EHC597/8 series Premium HSS Milling Cutter has 4 flutes and a weldon shank. These end mills range in diameter from 2-32mm. The TiALN Super Hardened Premium HSS Substrate provides exceptional ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £9.12 £7.60

    View Products EHC597/8
  16. 4&6 Flute Uncoated Premium Superhard HSS End Mill - ESH597/8 (YG-1)
    4&6 Flute Uncoated Premium Superhard HSS End Mill - ESH597/8 (YG-1)
    The YG-1 ESH597/8 series Premium HSS Milling Cutter has 4 flutes and a weldon shank. These end mills range in diameter from 2-32mm. The Super Hardened Premium HSS Substrate provides exceptional value ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £6.88 £5.73

    View Products ESH597/8
  17. 4&6 Flute TiAlN Coated Premium Superhard HSS End Mill - EHC595/6 (YG-1)
    4&6 Flute TiAlN Coated Premium Superhard HSS End Mill - EHC595/6 (YG-1)
    The YG-1 EHC595/6 series Premium HSS Milling Cutter has 4 flutes and a weldon shank. These end mills range in diameter from 2-32mm. The TiALN Super Hardened Premium HSS Substrate provides exceptional ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £7.20 £6.00

    View Products EHC595/6
  18. 4&6 Flute Uncoated Premium Superhard HSS End Mill - ESH595/6 (YG-1)
    4&6 Flute Uncoated Premium Superhard HSS End Mill - ESH595/6 (YG-1)
    The YG-1 ESH595/6 series Premium HSS Milling Cutter has 4 flutes and a weldon shank. These length end mills range in diameter from 2-32mm. The Super Hardened Premium HSS Substrate provides exceptional ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £5.26 £4.38

    View Products ESH595/6
  19. 3 Flute TiAlN Coated Premium Superhard HSS Long Length Slot Drill - EHC516 (YG-1)
    3 Flute TiAlN Coated Premium Superhard HSS Long Length Slot Drill - EHC516 (YG-1)
    The YG-1 EHC516 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These end mills range in diameter from 2-32mm. The TiALN coated Super Hardened Premium HSS Substrate provides excepti ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £8.92 £7.43

    View Products EHC516
  20. 3 Flute Uncoated Premium Superhard HSS Long Length Slot Drill - ESH516 (YG-1)
    3 Flute Uncoated Premium Superhard HSS Long Length Slot Drill - ESH516 (YG-1)
    The YG-1 ESH516 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These end mills range in diameter from 2-32mm. The Super Hardened Premium HSS Substrate provides exceptional value an ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £6.88 £5.73

    View Products ESH516
  21. 3 Flute TiAlN Coated Premium Superhard HSS Standard Length Slot Drill - EHC573 (YG-1)
    3 Flute TiAlN Coated Premium Superhard HSS Standard Length Slot Drill - EHC573 (YG-1)
    The YG-1 EHC573 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These end mills range in diameter from 2-32mm. The TiALN coated Super Hardened Premium HSS Substrate provides excepti ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £7.20 £6.00

    View Products EHC573
  22. 3 Flute Uncoated Premium Superhard HSS Standard Length Slot Drill - ESH573 (YG-1)
    3 Flute Uncoated Premium Superhard HSS Standard Length Slot Drill - ESH573 (YG-1)
    The YG-1 ESH573 series Premium HSS Milling Cutter has 3 flutes and a weldon shank. These end mills range in diameter from 2-32mm. The Super Hardened Premium HSS Substrate provides exceptional value an ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £5.26 £4.38

    View Products ESH573
  23. 3 Flute Throwaway Uncoated HSS 8% Cobalt Long Slot Drilll - E2554 (YG-1)
    3 Flute Throwaway Uncoated HSS 8% Cobalt Long Slot Drilll - E2554 (YG-1)
    The YG-1 E2554 series HSS Milling Cutter has 3 flutes (throwaway style) and a weldon shank. These end mills range in diameter from 2-10mm. The HSS 8% Cobalt Substrate provides exceptional value and to ... read more >

    Exceptional value and tool life.
    Available with a weldon shank.
    Wide range of geomotries and sizes available for a variety of milli ... read more >
    • P
    • N

    Starting at £5.24 £4.37

    View Products E2554
  24. 3 Flute Throwaway Uncoated HSS 8% Cobalt Short Slot Drill - E2253 (YG-1)
    3 Flute Throwaway Uncoated HSS 8% Cobalt Short Slot Drill - E2253 (YG-1)
    The YG-1 E2553 series HSS Milling Cutter has 3 flutes (throwaway style) and a weldon shank. These end mills range in diameter from 1-10mm. The HSS 8% Cobalt Substrate provides exceptional value and to ... read more >

    Exceptional value and tool life.
    Available with a weldon shank.
    Wide range of geomotries and sizes available for a variety of milli ... read more >
    • P
    • N

    Starting at £5.17 £4.31

    View Products E2553
  25. 2 Flute TiAlN Coated Premium Superhard HSS Long Length Slot Drill - EHC571 (YG-1)
    2 Flute TiAlN Coated Premium Superhard HSS Long Length Slot Drill - EHC571 (YG-1)
    The YG-1 EHC571 series Premium HSS Milling Cutter has 2 flutes and a weldon shank. These long length slot drills range in diameter from 2-32mm. The TiALN coated Super Hardened Premium HSS Substrate pr ... read more >

    Super Hardened Premium HSS substrate gives great performance in general machining.
    Exceptional value and tool life.
    Available with ... read more >
    • P
    • N

    Starting at £7.10 £5.92

    View Products EHC571

Showing 1-25 of 28

Page
Set Descending Direction