Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

Aluminium Machining Milling Cutters

Aluminium Machining Milling Cutters

Carbide milling cutters for aluminium machining. For high speed machining of aluminium, copper, brass and non-ferrous metals. Milling cutters for aluminium machining are available in three different geometries Alu Power, A+ and Alu Power Wave-Cut.

Filter By arrow
carrat-down

37 Items

Sort By
carrat-down
sort-descending

The Through Coolant Milling Cutter IC features chip dividers on the front face, complimented by
internal coolant holes and uneven pitch. The unique geometry gives incredible performance and

  • Roughing or finishing at cutting depths up to 2xD
  • Internal coolant
  • Superior chip management in all milling applications due to chip dividers on front face and flutes
  • High gloss polished flutes
  • Edge protection corner radius
  • Designed for machining aluminium, plastic, brass, bronze and copper

Size

Diameter (mm)4 - 16
Overall Length (mm)50 - 90
Flute Length (mm)12 - 32
Shank (mm)6 - 16

From £28.87 £24.06

The Through Coolant Milling Cutter IC features chip dividers on the front face and side of the flutes, complimented
by internal coolant holes, variable helix and uneven pitch. The unique geometr...

  • Roughing or finishing at cutting depths up to 2xD
  • Internal coolant
  • 4 flutes for extreme performance
  • Superior chip management in all milling applications due to chip dividers on front face and flutes
  • High gloss polished flutes
  • Edge protection chamfer prep
  • Designed for machining aluminium, plastic, brass, bronze and copper

Size

Diameter (mm)6 - 20
Overall Length (mm)57 - 104
Flute Length (mm)13 - 38
Shank (mm)6 - 20

From £88.22 £73.52

The E5E49 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 3 flute cutters are ideal for mirror finish machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 100
    Flute Length (mm)12 - 40
    Shank (mm)6 - 20

    From £21.60 £18.00

    The E5D70 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 3 flute cutters are ideal for mirror finish machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)1 - 20
    Overall Length (mm)40 - 150
    Flute Length (mm)3 - 75
    Shank (mm)6 - 20

    From £25.40 £21.17

    The E5522 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 2 flute cutters have improved surface finish and chip evacuation on Aluminium and Non-Ferrous materials....

  • Suitable for high speed machining in aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)8 - 38
    Shank (mm)6 - 20

    From £13.12 £10.93

    The Korloy APFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ rang...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • U-Shaped flute design for extreme quality surface finish.
  • Deep flute pockets prevent swarf clogging up the tool.
  • High rigidity on the cutting edge ensures high productivity.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.
  • Size

    Diameter (mm)2.5 - 20
    Overall Length (mm)50 - 100
    Flute Length (mm)8 - 45
    Shank (mm)6 - 20

    From £33.67 £28.06

    The E5D71 series carbide Alu-Power cutters from YG-1 range from 1-20mm in diameter. These 2 flute cutters have lapped flutes for exceptional surface finish and are ideal on Aluminium and Non-Ferrous m...

  • Suitable for high speed machining in aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Wide cut geometry, ideal for plastics such as ABS, acrylic and non-ferrous metals.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)1 - 20
    Overall Length (mm)50 - 110
    Flute Length (mm)3 - 55
    Shank (mm)6 - 20

    From £27.17 £22.64

    The E5521 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 2 flute cutters come with a flat/weldon shank and have improved surface finish and chip evacuation on Aluminiu...

  • Suitable for high speed machining in aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Cylindrical relief reduces chipping of corner edges.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)8 - 38
    Shank (mm)6 - 20

    From £13.12 £10.93

    The E5E83 series carbide Alu-Power cutters from YG-1 range from 1-12mm in diameter. These 3 flute cutters are ideal for machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)1 - 12
    Overall Length (mm)60 - 110
    Flute Length (mm)2.5 - 30
    Shank (mm)4 - 12

    From £31.78 £26.48

    The E5E51 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 3 flute corner radius cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and N...

  • Suitable for high speed machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 100
    Flute Length (mm)12 - 40
    Shank (mm)6 - 20

    From £18.16 £15.13

    The E5908 series carbide Alu-Power cutters from YG-1 range from 2-16mm in diameter. These 3 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-F...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)2 - 16
    Overall Length (mm)60 - 100
    Flute Length (mm)3 - 24
    Shank (mm)6 - 16

    From £36.62 £30.52

    The E5E85 series carbide Alu-Power cutters from YG-1 range from 0.5-4mm in diameter. These 2 flute cutters have a long neck for deep pocket milling of Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Long neck design for deep pocket machining.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)0.5 - 4
    Overall Length (mm)45 - 80
    Flute Length (mm)1 - 8
    Shank (mm)4 - 6

    From £11.51 £9.59

    The Mammut AM252 series uncoated carbide 45 Degree helix cutter has 2 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal f...

    • Micrograin carbide
    • Uncoated polished solid carbide
    • Polished high helix milling cutter for general aluminium and plastic machining
    • 45° Helix
    • 2 Flute
    • Plain shank

    Size

    Diameter (mm)1 - 14
    Overall Length (mm)50 - 100
    Flute Length (mm)3 - 40
    Shank (mm)3 - 14

    From £4.20 £3.50

    The E5E50 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 3 flute cutters are ideal for machining Aluminium and Non-Ferrous materials....

  • Suitable for machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy achieved.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)3 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)8 - 41
    Shank (mm)6 - 20

    From £24.10 £20.08

    The Mammut AM358 series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal f...

    • Micrograin carbide
    • Uncoated polished solid carbide
    • Polished high helix milling cutter for general aluminium and plastic machining
    • 45° Helix
    • Long length
    • 3 Flute
    • Plain shank

    Size

    Diameter (mm)14 - 20
    Overall Length (mm)100 - 100
    Flute Length (mm)40 - 40
    Shank (mm)14 - 20

    From £89.05 £74.21

    The E5D80 series carbide Alu-Power cutters from YG-1 range from 0.5-12mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy.
  • Ball nosed geometry.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)0.5 - 12
    Overall Length (mm)40 - 110
    Flute Length (mm)1 - 22
    Shank (mm)3 - 12

    From £15.46 £12.88

    The E5E90 series carbide Alu-Power cutters from YG-1 range from 0.5-4mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy.
  • Long neck design for deep pocket machining.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)0.5 - 4
    Overall Length (mm)45 - 110
    Flute Length (mm)1 - 8
    Shank (mm)4 - 6

    From £18.32 £15.27

    The Korloy APLFE3 series A+ mirror finish aluminum cutter has 3 flutes and a plain shank. These long length end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • U-Shaped flute design for extreme quality surface finish.
  • Deep flute pockets prevent swarf clogging up the tool.
  • High rigidity on the cutting edge ensures high productivity.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.
  • Size

    Diameter (mm)3 - 20
    Overall Length (mm)60 - 150
    Flute Length (mm)12 - 75
    Shank (mm)6 - 20

    From £34.46 £28.72

    The YG-1 E2464 standard length slot drill has 2 flutes and a weldon shank. They range in diameter from 1-32mm and have a special Alu-Cut geometry with a 42 Degree Helix angle. The HSS 8% Cobalt Substr...

    • Exceptional value and tool life.
    • Available with a weldon shank.
    • Alu-Cut geomotry makes this cutter ideal for non-ferrous machining.
    • 42° Helix gives deeper flute pockets for quick chip clearance and to prevent flutes clogging.
    • Wide range of geomotries and sizes available for a variety of milling applications.
    • Uncoated to prevent 'sticking' of material to cutter.
    • HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

    Size

    Diameter (mm)1 - 32
    Overall Length (mm)49 - 133
    Flute Length (mm)3 - 53
    Shank (mm)6 - 32

    From £14.57 £12.14

    The YG-1 E2509 long series slot drill has 2 flutes and a weldon shank. They range in diameter from 2-20mm and have a special Alu-Cut geometry with a 42 Degree Helix angle. The HSS 8% Cobalt Substrate ...

    • Exceptional value and tool life.
    • Available with a weldon shank.
    • Alu-Cut geomotry makes this cutter ideal for non-ferrous machining.
    • 42° Helix gives deeper flute pockets for quick chip clearance and to prevent flutes clogging.
    • Wide range of geomotries and sizes available for a variety of milling applications.
    • Uncoated to prevent 'sticking' of material to cutter.
    • HSS 8% cobalt content ideal for tougher steels or where longer tool life is required.

    Size

    Diameter (mm)2 - 20
    Overall Length (mm)54 - 141
    Flute Length (mm)10 - 75
    Shank (mm)6 - 20

    From £19.03 £15.86

    The Korloy APFE2 series A+ mirror finish aluminum cutter has 2 flutes and a plain shank. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide substrate. The A+ rang...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • U-Shaped flute design for extreme quality surface finish.
  • Deep flute pockets prevent swarf clogging up the tool.
  • High rigidity on the cutting edge ensures high productivity.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.
  • Size

    Diameter (mm)2.5 - 20
    Overall Length (mm)50 - 100
    Flute Length (mm)8 - 45
    Shank (mm)6 - 20

    From £33.67 £28.06

    The E5E39 series carbide Alu-Power rippers from YG-1 range from 6-20mm in diameter. These plain shank 3 flute rougher cutters have a reduced neck and an aluminium pitch to prevent built up edge. These...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Reduced neck diameter for deep pocket machining.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Aluminium pitch prevents built up edge.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)6 - 20
    Overall Length (mm)57 - 104
    Flute Length (mm)16 - 38
    Shank (mm)6 - 20

    From £47.62 £39.68

    The E5D72 series carbide Alu-Power cutters from YG-1 range from 3-20mm in diameter. These 3 flute corner radius cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and N...

  • Suitable for high speed machining of aluminium and other non-ferrous machining.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy.
  • High metal removal rates.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)6 - 12
    Overall Length (mm)70 - 110
    Flute Length (mm)10 - 20
    Shank (mm)6 - 12

    From £34.14 £28.45

    The Korloy APRE series A+ mirror finish aluminum cutter has 2 flutes, a plain shank and a ball nosed end. These end mills range in diameter from 2.5mm-20mm and are made from a micrograin carbide subst...

  • Suitable for high speed roughing of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium..
  • Deep flute pockets prevent swarf clogging up the tool.
  • High rigidity on the cutting edge ensures high productivity.
  • Ball Nosed geometry.
  • Micrograin Carbide Substrate.
  • Excellent chip evacuation even in high feed machining.
  • Size

    Diameter (mm)1 - 12
    Overall Length (mm)50 - 75
    Flute Length (mm)2 - 24
    Shank (mm)4 - 12

    From £31.19 £25.99

    The E5910 series carbide Alu-Power cutters from YG-1 range from 6-20mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-F...

  • Suitable for high speed machining of aluminium and other non-ferrous materials.
  • Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
  • Deep flute pockets prevent swarf clogging up the tool.
  • Increased tool life and higher cutting accuracy.
  • Reduced neck for longer reach.
  • Micrograin Carbide Substrate.
  • Sharp cutting edges with mirror finish machining.
  • Ultra-high metal removal rates possible with WAVE-CUT.
  • Size

    Diameter (mm)6 - 20
    Overall Length (mm)55 - 100
    Flute Length (mm)5.5 - 17
    Shank (mm)6 - 20

    From £40.27 £33.56