BT MAS Power E-Hydro Chucks - Power-E Hydro (High Torque) Hydraulic Chucks - High Torque Hydraulic Chucks & Sets - Hydraulic Chucks - Spindle Tooling

BT50 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT50 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

BT50 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 83.5mm or 90mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	12 - 32

From £153.28 £127.73

View Products

BT40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

BT40 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 58mm or 72.5mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	12 - 20

From £153.28 £127.73

View Products

BT30 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

BT30 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

BT30 back end type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 69mm or 90mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	12 - 20

From £192.59 £160.49

View Products