Free Next Day Delivery
on orders over £59 ex vat*

Expert Technical Team
Get advice on 01924 869 615

Same Day Despatch
On orders placed up to 5.45pm

HSK Power E-Hydro Chucks

HSK Power E-Hydro Chucks

BT Tapered POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whilst pushing feed rates up to 30% higher.

Filter By arrow
carrat-down

2 Items

Sort By
carrat-down
sort-descending

HSK100A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice ...

  • HSK100A back end type.
  • AD/B through coolant type.
  • 3 micron run-out accuracy, balanced to 25,000RPM.
  • Either 90mm or 100mm gauge length.
  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
  • Up to 300% more tool life than ER Collet Chucks.
  • Up to 900Nm clamping force.
  • High torque transmission is guaranteed using hydraulic clamping technology.
  • Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
  • Can be used with reduction sleeves or the tool can be clamped directly in the holder. 
  • HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
  • Perfect surface finish – no chatter marks.
  • Push feed rates up to 30% higher.
  • Change cutting tool in seconds with 3 micron repeatability.
  • Compact design.
  • Suitable for through coolant tools.

From £274.40 £228.67

HSK63A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice w...

  • HSK63A back end type.
  • AD/B through coolant type.
  • 3 micron run-out accuracy, balanced to 25,000RPM.
  • 80mm gauge length.
  • The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
  • Up to 300% more tool life than ER Collet Chucks.
  • Up to 900Nm clamping force.
  • High torque transmission is guaranteed using hydraulic clamping technology.
  • Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
  • Can be used with reduction sleeves or the tool can be clamped directly in the holder. 
  • HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
  • Perfect surface finish – no chatter marks.
  • Push feed rates up to 30% higher.
  • Change cutting tool in seconds with 3 micron repeatability.
  • Compact design.
  • Suitable for through coolant tools.

From £179.65 £149.71