Power E-Hydro Chuck Kits - Power-E Hydro (High Torque) Hydraulic Chucks - High Torque Hydraulic Chucks & Sets - Hydraulic Chucks - Spindle Tooling

HSK63A Power E-Hydro Hydraulic Chuck Kit - (YG-1)

HSK63A YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice w...

The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
Up to 300% more tool life than ER Collet Chucks
Sleeves included: 1 x 6,8,10,12 &16mm
Up to 900Nm clamping force
Perfect surface finish – no chatter marks
Push feed rates up to 30% higher
Minimum noise
Change cutting tool in seconds with 3 micron repeatability
3 micron run-out accuracy, balanced to 25,000RPM
Contains 20mm BT40 toolholder
Compact design
Suitable for through coolant tools

Size

Diameter (mm)	20 - 20

From £427.50 £356.25

View Products

BT40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

BT40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noise whi...

The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
Up to 300% more tool life than ER Collet Chucks
Sleeves included: 1 x 6,8,10,12 &16mm
Up to 900Nm clamping force
Perfect surface finish – no chatter marks
Push feed rates up to 30% higher
Minimum noise
Change cutting tool in seconds with 3 micron repeatability
3 micron run-out accuracy, balanced to 25,000RPM
Contains 20mm BT40 toolholder
Compact design
Suitable for through coolant tools

Size

Diameter (mm)	20 - 20

From £397.86 £331.55

View Products

SK40 Power E-Hydro Hydraulic Chuck Kit - (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming
Up to 300% more tool life than ER Collet Chucks
Sleeves included: 1 x 6,8,10,12 &16mm
Up to 900Nm clamping force
Perfect surface finish – no chatter marks
Push feed rates up to 30% higher
Minimum noise
Change cutting tool in seconds with 3 micron repeatability
3 micron run-out accuracy, balanced to 25,000RPM
Contains 20mm BT40 toolholder
Compact design
Suitable for through coolant tools

Size

Diameter (mm)	20 - 20

From £397.86 £331.55

View Products