SK DIN69871 Power E-Hydro Chucks - Power-E Hydro (High Torque) Hydraulic Chucks - High Torque Hydraulic Chucks & Sets - Hydraulic Chucks - Spindle Tooling

Shop By

In Stock

Diameter (mm)

Gauge Length

Price

Taper

SK50 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK50 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

SK50 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 64.5mm or 81mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	20 - 32

From £231.28 £192.73

View Products

SK40 Power E-Hydro Hydraulic Chuck 25,000RPM G2.5 (YG-1)

SK40 YG-1 POWER E-HYDRO Toolholders give up to 300% more tool life than ER Collet Chucks with up to 900Nm clamping force. Perfect surface finish is achieved with no chatter marks and minimum noice whi...

SK40 back end type.
AD/B through coolant type.
3 micron run-out accuracy, balanced to 25,000RPM.
Either 50mm or 64.5mm gauge length.
The Ultimate Hydraulic Toolholder For Milling, Drilling and Reaming.
Up to 300% more tool life than ER Collet Chucks.
Up to 900Nm clamping force.
High torque transmission is guaranteed using hydraulic clamping technology.
Optimal radial rigidity from a compact and robust toolholder body, avoids lateral deflection during metal cutting.
Can be used with reduction sleeves or the tool can be clamped directly in the holder.
HSS and carbide shanks in plain, weldon or whistle notch can be clamped.
Perfect surface finish – no chatter marks.
Push feed rates up to 30% higher.
Change cutting tool in seconds with 3 micron repeatability.
Compact design.
Suitable for through coolant tools.

Size

Diameter (mm)	12 - 20

From £153.28 £127.73

View Products